Question about Dodge Ram 350

3 Answers

Dodge dually D350 desel,headlights and front marker lights work but all rear running lights out.turn signals,flashers,and brake lights work.Checked fuses and theyre good .Any suggestions???!

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Dodge Master
  • 1,727 Answers

Running lights, marker lights all the same

suspect as Ray mentioned a bad bed connector
then suspect a poor connector at the trailer plug harness

Posted on Apr 14, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 2,899 Answers

Check some relays, most of those lights are driven by relays and a fuse.
Hope this helps.

Posted on Apr 14, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 41,433 Answers

Check the cable connectors under the bed dodge is infamous for bad connectors

Posted on Apr 14, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear brakelights and turn signals do not work


The turn signal and brake lights are controlled by the turn signal switch.
You did not mention parking lights so I will assume they work.

Could be a faulty turn signal switch or a wiring problem between the dash and the rear of the van.
Do the hazard flashers work on all four corners ?

Jun 27, 2012 | Ford Windstar Cars & Trucks

1 Answer

2002 TrailBlazer side marker lights blink with 4ways


I think you either have a defective bulb socket or you still have a ground problem, that is the only thing that can cause this, the ground issue may be caused by the turn signal switch as well.

Apr 12, 2017 | 2002 Chevrolet TrailBlazer

1 Answer

Signal lights, fuse box and signal light relay in 2001 Volkswagen


The bulbs on these cars can be delicate. Some get replaced every year or so-( headlights, tail and brake) and some I've never touched in 8 years (my front turn signals and marker lights)

The fast blinking occurance is normal when a turn signal bulb goes out.

The rear lights are common to blow, I keep spares in the glovebox.

Make sure you were given the correct bulb, check to see that it works and isn't defective. Also there is an empty spot in the rear bulb holder- make sure you didn't mistakenly pop a bulb in there cause' it won't work.

The front right signal light is in the right headlight housing. Open the hood and on the back of the housing there are two plastic caps. One is curved and one is rectangular- you want to take off the rectangular one.

Open the drivers door and on the side of the dash there's a cover. This is the main fuse block. Use a coin or carefully with a screwdriver pry it open. To check a fuse pull it out, noting exactly where it came from, and visually inspect it to see if it is blown.

Fuse # 2- turn signal system
Fuse #4- License plate lights
Fuse #7- back up lights
Fuse #13- brake lights
Fuse #22- parking and side marker lights, right
Fuse #23- parking and side marker lights, left

The turn signal flasher is integrated into the hazzard button in the center of the dash. If all else is good and you suspect the flasher is bad, which is a good possibility, call a VW dealer and have them run your VIN# to check for recalls. The hazzard switch for some cars around your year had a recall on em'.





Jan 01, 2010 | 2001 Volkswagen Jetta TDI

1 Answer

Rear turn signals work, not the front


most likely the multifunction switch is defective.

Sep 10, 2009 | Dodge Colt Cars & Trucks

2 Answers

No tail lights,marker lights (FRT. OR REAR), license plate light


broken wire, bud .at the rear end their should be a ground wire bad, broken or cut get back to me.

Nov 23, 2008 | 2002 Dodge Ram Maxi

1 Answer

No brake lights of blinkers 1990 dodge dynasty


While not likely, it is possible that the light bulbs in both sides are have bad filaments. Turn on ignition key (but don't start engine). Then turn on parking lamps (first detent or "click" on headlamp switch). Walk around car and look for illumination on front parking lamps and rear tail lights. Turn on the right turn signal. Are those (right hand) lamps now changing brilliance? Try the left turn signal in the same manner. Are those (left hand) front and rear lights changing briiliance? Take note of any positions that did NOT change briliance when the turn signals were activated. If NONE changed briliance, you either have a bunch of bad bulbs (unlikely) or a bad flasher (more likely) or a bad turn signal switch (most likely) or perhaps wiring problems (possible if the car has been in a collision or has been "worked on" by some "non-expert" mechanic). Check the action of the emergency flasher control switch located on the steering column (facing up). Pushing it in (down) should result in the button going to two different heights alternately (low, high, low, high). You could just have bad flashers or corroded flasher contacts! Good luck!

Nov 15, 2008 | 1993 Dodge Dynasty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...