Question about Nissan Cars & Trucks

Open Question

How to replace heater blower on a Nissan rogue 2008

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
NismoMaster
  • 146 Answers

SOURCE: how do you replace an in cabin micro filter on a

Remove instrument driver lower cover.
Remove accelerator pedal assembly.
Remove filter cover and then remove in-cabin microfilter.

Posted on Aug 27, 2009

Ad
  • 1 Answer

SOURCE: "2008 nissan rogue problem shifting

It is the battery. It is bad and shorting out. Check the manual for directions to trouble shoot until you replace it. There is a small button that you need to remove next to the shifter, place the key in the hole and hold for about 10 seconds. It is a shift release.

I had the same problem. Fixed!

Posted on Apr 11, 2011

GodBlessU
  • 3513 Answers

SOURCE: CODE P0444 2008 NISSAN ROGUE

Hi,

Thank you for contacting fixya.com.

CODE P0444 means Evaporative Emission System Purge Control Valve Circuit Open

Please check this links from Nissan forum to get a detailed idea related to this code.

http://engine-codes.com/p0444_nissan.html

http://www.permoveo.ltd.uk/tabid/122/OBD-Error-Code/P0444/Diagnostics/Nissan/Default.aspx

Please get back to us if you have further query else please accept the suggestion.

Posted on Jun 06, 2011

bayyagg
  • 1672 Answers

SOURCE: 2008 nissan rogue blower not

Hi,
First check the fuse for that a/c blower. replace with the same amperage if broken.
If it is still okay the problem will be the resistor block, this part control the speed of your a/c and heater blower. It is located behind the glove box compartment, inside the blower housing. There are some wiring connected to it.
The part is available in your Nissan parts center or any parts dealer in your area.
Hope that helps you out.
Thanks for using FixYa!

Posted on Jul 19, 2011

  • 8404 Answers

SOURCE: My 2008 nissan rogue will

If you have good voltage in the battery and a clicking sound ... either the start solenoid is faulty or the starter is faulty. You can check the start solenoid with a voltage meter. Place the probes one to the starter side of the solenoid the other to ground. Have someone turn the key. The battery side of the solenoid will always have 12 volts on it. The battery side should only have 12 volts when the solenoid is activated (you turned the key). If you get 12 volts on the start side, suspect the starter.

u for your question @ FixYa.com

Posted on Sep 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do i find nissan rogue blower motor


Behind glove box , Remove glove box first

Mar 05, 2015 | 2010 Nissan Rogue

1 Answer

Blower motor


They do not publish "specs" only a part number.

Jun 29, 2013 | 2008 Nissan Rogue

1 Answer

Blower not working for a/c and heater


First check the fuses, then the switch, There might be a relay too. See if power is getting to the motor if it is and it doesn't run then the motor is bad (usually the brushes are wore out).

Oct 04, 2012 | 2008 Nissan Rogue

1 Answer

Nissan rogue blower motor resistor


On the 2009 Rouge I have the blower motor resistor is located behind the cabin filter on the drivers side near the gas pedal. Followed the suggestion above and had to reinstall the glovebox as ipart was located on the opposite side. thx for that

Jul 02, 2012 | 2008 Nissan Rogue

1 Answer

2008 Nissan Rogue AWD light stays on


nissan rogue 2008 AWD light is on how torn off some time it make byhimself

May 23, 2012 | 2008 Nissan Rogue

2 Answers

2008 nissan rogue blower not working


Hi,
First check the fuse for that a/c blower. replace with the same amperage if broken.
If it is still okay the problem will be the resistor block, this part control the speed of your a/c and heater blower. It is located behind the glove box compartment, inside the blower housing. There are some wiring connected to it.
The part is available in your Nissan parts center or any parts dealer in your area.
Hope that helps you out.
Thanks for using FixYa!

Jul 19, 2011 | 2008 Nissan Rogue

1 Answer

"2008 nissan rogue problem shifting


It is the battery. It is bad and shorting out. Check the manual for directions to trouble shoot until you replace it. There is a small button that you need to remove next to the shifter, place the key in the hole and hold for about 10 seconds. It is a shift release.

I had the same problem. Fixed!

Nov 09, 2010 | 2008 Nissan Rogue

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...