Question about Dodge Cars & Trucks

1 Answer

1998 Dodge Dekota Sport..Had crankshaft position sensore replaced and now the ABS light came on. What could have caused that and or what needs to be done?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,326 Answers

Have abs system scanned maybe a wire came loose or was disconnected and not reconnected. Some wires r in that area on some vehicle

Posted on Apr 08, 2015

  • Mary Kea Apr 08, 2015

    APPRANTLY I HAVE A TRUCK WITH ITS OWN MIND. TRUCK WILL RUN FOR HOURS AND NOT SHUT OFF. THEN THE MECHANIC CHECKS OTHER THINGS, WIRES ETC AND IT WILL SHUT DOWN. NEXT TIME HE DOES SAME THING AND IT DOES NOT SHUT DOWN. HE IS BAFFLED AS CANNOT SEEM TO LOCATE THE PROBLEM. CRANKSHAFT POSITION SENSOR WAS REPLACED AS FIGURED THAT WAS THE CAUSE OF THE TRUCK SHUTTING DOWN WHENEVER IT DECIDES TO. NOW IT WILL STILL DO IT. HELP PLEASE! WHAT ELSE CAN CAUSE THIS?

  • Mary Kea Apr 08, 2015

    ON THE 98 DODGE DEKOTA FOR ABOVE.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 98 Dodge Dekota. Can someone tell me if a crankshfat sensor & a distributor preform the same thing? I was told I have a distributor and not a Crankshaft sensor.


they do a similar job but in a different way. no you don`t have a cam sensor in the conventional way, the distributor tells the computer when to fire the injectors and ignition.

Mar 20, 2015 | 1998 Dodge Dakota

2 Answers

Why wont my 98 Dodge Dekota Sport stay running?


the crank sensor can give these symptoms and some vehicle makes OBD do not capture all the fault codes , i would try a replacement crank sensor they are not expensive and are usually very easy to replace , go to a Dodge dealer as there may be an up graded sensor because of this very reason , i.e Renault included a longer wiring connection as this was the cause with there vehicle's , i know you dont need to know that but just trying to illustrate that there some known faults with many vehicle makes so a main dealer will know of them

Mar 19, 2015 | 1998 Dodge Dakota

1 Answer

How to replace a 1998 dodge dakota sport abs sensor


The front ABS sensors are built into the hub assemblies and the rear is mounted in the top of the rear differential. One would need to know where the fault is at before just replacing the sensors.
The rear one is relatively easy to replace aand the front ones require front hub assembly r&r.

Feb 23, 2015 | Dodge Cars & Trucks

1 Answer

2005 Dodge Neon SXT 2.0L crankshaft position sensor location to replace


P0315 - Crankshaft Position System Variation Not Learned
P0335 - Magnetic Crankshaft Position Sensor Electrical Error China OBD2 car diagnostic tools wholesale on CareUCar

Mar 20, 2014 | 2005 Dodge Neon SXT

1 Answer

PO017 code on a dodge journey 2009


P0017 Dodge - Crankshaft-Camshaft Timing Misalignment Bank 1 Sensor 2Possible causes - Engine oil dirty
- Incorrect engine viscosity
- Crankshaft position sensor circuit is open or shorted
- Camshaft position sensor circuit is open or shorted
- Faulty crankshaft position sensor
- Faulty camshaft position sensor
- Timing gear misalign

Nov 13, 2013 | 2010 Dodge Journey SE

2 Answers

I have 2001 Dodge Ram 200 5.9 diesel. All gauges have gone off line, the ABS, engine light, low fuel light are on and "no bus" comes up where the millage should be. Any thoughts?


I am working on the same problem now, could be cluster, short, pcm, ctm, etc, expensive and frustrating. will notify you with the fix.

Oct 18, 2010 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...