Question about Ford Cars & Trucks

1 Answer

I have a 2006 Ford Fusion SEL V6. I am having problems with starting my vehicle. It takes sometimes 3 turns of the key for it to finally start. I turn the key and "click ". I replaced the battery

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 12,540 Answers

Where do you here the click , at the starter ?Does the starter turn over slow ? Need to do a voltage drop test on starter circuit ! Possible Battery cable problem ! Starter Voltage Drop

Posted on Apr 07, 2015

  • 2 more comments 
  • braxton berry
    braxton berry Apr 07, 2015

    The click is from the starter. Recently i had a engine coolant leak from the thermostat housing which poured engine coolant everywhere. Could the engine coolant corrode the connections. Could it just need to be cleaned off. I never had a problem with it starting until the leak

  • braxton berry
    braxton berry Apr 07, 2015

    The starter turns over fine after a few turns of the key. It usually takes 3 to 10 turns before it finally starts.

  • Jeff Armer Apr 07, 2015

    It could have , check the connections first !

  • braxton berry
    braxton berry Apr 07, 2015

    Ok i will check the connections.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
warlock61
  • 659 Answers

SOURCE: Ford Focus 2004 - key won't turn in ignition

these vehicles have a lot of problems with ignition cylinders binding up. It needs to be replaced with an updated cylinder. If you tap on the key with a small hammer or something like it while turning the key you can get it to turn

Posted on Dec 17, 2008

129997
  • 3 Answers

SOURCE: car wont start...sometimes

Sounds like a bad starter solenoid, usually cheapest and easiest to replace the starter and solenoid as a unit. It is always best to check for power between the solenoid and the starter with a test light, if the solenoid clicks but the test light doesn't light up you have found the problem in the solenoid.

Posted on Apr 28, 2009

hardinfarms
  • 144 Answers

SOURCE: 1993 Nissan King Cab pickup won't start on hot days

Replace the ignition switch, most all 1993 and 1994 Nissan pickups had bad ignition switch's

Posted on Jul 20, 2009

  • 3600 Answers

SOURCE: Jeep Cherokee starting issue

On an intermittent start problem like this you may be having a starter solenoid issue or your wire on the starter from the key switch may be loose. Or you may have a corroded battery cable or the safety neutral switch may be going bad. Is it a automatic? If it were it would be the clutch safety switch going out. So do the simple things first. Clean cables like the first guy said if that does not fix it locate the starter and if you have jumper cables the next time it does it put the positive lead of the jumper cable on the Positive battery terminal and the other touch to the starter wire with the key in the run position where the big wire on the starter is, if you here it spin it means the starter motor is ok if it don't it is bad or the connection on the starter is loose. Also a bad battery cable could cause this from the battery to the starter next put a small wire into the end of the positive jumper cable and touch the S terminal on the starter if you here a solid clung it means the solenoid is good. So check the connections on the starter and tighten the starter bolts as they may have worked loose and don't have a good ground. So if you want more as stance just post on my question and I will hell p more and if this is more informative please rate

Posted on Sep 23, 2009

SOURCE: Same Problem-My 2006 GX470 won't start -Key won't turn.

Had the same issue with my wife's 2005 Lexus GX470. The issue is that the shifter is not in park (even though it seems it is). The other issue is that without the key turned, you can not move the shifter to neutral. If you look closely at the gear shift, on the left above the P (Park Symbol) there is a small rectangular box that has a **** on one side. _862.jpgTake a small screwdriver and lift the plastic cover which will reveal a button. With your foot on the brake, push the button with one hand and now you will be able to move the shifter to neutral with the other hand. Now, put it back in park and you should now be able to turn your key and start your car. Put the little piece of plastic you removed over the button and go on your way.

Posted on Mar 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Ford Fusion will not start wiggle wheel flex column in out up down all while working key finally starts what has went bad


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Ford Fusion 2006 2009 WorkSHOP Service repair manual Download

Jul 04, 2016 | 2006 Ford Fusion

1 Answer

How to remove and replace passenger side mirror on a 2014 ford fusion


Replace Your Car Passenger Side Mirror - How To - DIY ...

? 3:46
https://www.youtube.com/watch?v=77lBQ_CRqdo
Apr 10, 2012 - Uploaded by GregHint
See how even a novice can repair a passenger mirror on a FordEscape. ... Replace Your Car Passenger Side Mirror - How To - DIY .... Replace 2003-2008 Toyota Corolla Side Mirror, How to Change Install 2004 2005 2006
About 22,000 results (0.61 seconds) Search ResultsHow-To: Replace Ford Fusion side mirror (HD) - YouTube? 7:27https://www.youtube.com/watch?v=iGHeXUbvvJsMay 7, 2014 - Uploaded by Derrick HardingFord Fusion SEL 3.0 Liter V6 How to fix broken side mirrorIncludes: ... Published on May 7, 2014 ..... Great instructions - just replaced the driver's side mirror on my 2007 Fusion following your instructions. ... Front brake pad replacement 2006 - 2012 Ford Fusion Lincoln Mazda Pads Rotor Install Remove ...

Jan 08, 2016 | Ford Cars & Trucks

1 Answer

I have an 06 ford fusion SEL with the 3 litre v6 and six speed automatic transmission. Its at 161000 miles currently. There is a loud rumbling nois coming from the front end. I had the tires, bearings and...


Sounds like it could be the CV joints, drive the car in reverse for a little and put steering on full lock, the noise will be a crunching sound coming from the front, if so then ist definitely the CV joint(constant velocity) joint, hope this helps

Jan 04, 2015 | 2006 Ford Fusion

1 Answer

Ford fusion stuck in park, engine won't start


It sounds like you have a dead battery. have it tested.

May 30, 2012 | 2007 Ford Fusion V6

3 Answers

How to overide limp mode in 2006 ford fusion


put the key in the ignition, and turn it so the lights and everything come on, do not start the engine, then pump the brakes 3 times, turn it off, and then start the engine. This worked for my 2008 for fusion. (if the brakes don't work, try the gas 3 times make sure the engine is off and the car is in park)
Best of luck!

Mar 01, 2011 | 2006 Ford Fusion

1 Answer

2006 FORD FUSION JERKING WHILE DRIVING!!!! HELP


Take it to the dealer as it is still under warranty.

Mar 27, 2009 | 2007 Ford Fusion I4 SEL Sedan

5 Answers

2006 Ford Fusion inside door handle stopped working


The plastic door handle is broken.
You will need to get a replacement door handle.
Go to http://www.flickr.com/photos/gtppilot/sets...57607539089979/
This should help. It is a set of photographs and instructions to do the job of replacing the handle.

Good luck.

Rgrdrake

Nov 11, 2008 | 2006 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...