Question about 2008 Chevrolet Uplander

Open Question

How to change the power steering pump on a 2008 Chevrolet Uplander?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

lindsay836
  • 677 Answers

SOURCE: 2008 Chevrolet Uplander. The car activates abs for

• An internal fault within the yaw rate sensor/lateral accelerometer, P/N 15189628, may be the first possible cause. • The vehicle stability enhancement system (VSES) electronic brake traction control module See if this info helps

Posted on Feb 05, 2010

lesabre1972
  • 474 Answers

SOURCE: replace power steering pump on a 1998 chevrolet

It could be done at home if you bought the proper tool to remove and replace the pully on the pump.They do give you some sort of a tool with the new pump but I find it really weak and they brake leaving you stuck.This is why I say"If you bought the proper tool".

Posted on Feb 17, 2010

Testimonial: "THANKS YOU HELPED ALOT"

  • 4793 Answers

SOURCE: i have locked my keys

USE A TYRE IRON AND A TOWEL FOR PRISING THE TOP OF THE DOOR AWAY FROM THE BODY WHILST A HELPER FISHES OUT THE KEYS WITH A WIRE COATHANGER,to reshape door,use a block of wood 1/2 way down the rear of the door when the window is down and push back to shape.(this is what bodyshops call "adjusting")

Posted on Nov 09, 2010

airjer995
  • 5332 Answers

SOURCE: where is the fuel pump located on Chevrolet Uplander 2007?

it is in the fuel tank. The fuel tank needs to be dropped in order to service the fuel pump module.

Posted on Jul 24, 2012

perkins48
  • 14228 Answers

SOURCE: changing the power steering fluid on a 2004 chevrolet cavalier

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f80cb3bdbFollow your power steering hoses to your steering and disconnect and use a container to catch fluid,you can also loosen hoses at pump and put towel over hole and blow out line to get all fluid out,make sure when you blow , the other end is secure and fluid doesn't go every where,good to have another person helping.Here's a link on how to bleed.

Posted on Oct 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bleeding the coolant system 2005 chevy uplander


Bleeding the coolant system Leisa, Check the attached links,instruction and guides on bleeding cooling systems. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Fill Bleed Coolant Chevy 3 4L V6
Bleeding Air In Cooling System
Coolant Flush How to Chevrolet Uplander 2005 2008 2008 Chevrolet Uplander...
How To Bleed Cooling System EricTheCarGuy


May 21, 2016 | Cars & Trucks

3 Answers

My 2008 uplander won't start what could be the problem and sometime it will start


get the ignition switch changed . believe there was a recall on them check with your local dealer

Jul 29, 2015 | 2008 Chevrolet Uplander

1 Answer

How to change power steering pump on 2005 chevy uplander


A haynes manual from your local auto parts store if your going to do it yourself is your best bet.

Jan 24, 2015 | 2005 Chevrolet Uplander

2 Answers

WHY CHEVY UPLANDER 2007 STERRING IS HARD TO TURN LEFT AND RIGHT


How hard, if it's as if you have lost power steering. Check to see if the power steering belt is still there or slipping, power steering fluid is low or empty. (Is cap leaking or leak in hose)
if it still has has power assist and has just gotten harder is it all the time or just low idol, need a better description of what is happening , I hope this helps

May 29, 2014 | 2006 Chevrolet Uplander

1 Answer

How to change powerstering pump chevy uplander


I just finished replacing mine.

It is much easier if you do these steps:

1. Remove the serpentine belt.
2. Remove the nuts holding the main fuse box over the battery.
3. Remove the reinforcing bar over the battery.
4. Remove the battery.
5. Remove the windsheild washer tank.
6. Now you have access to remove the pump pulley. Without removing the stuff, it may be possible, but it will be extremely difficult.
7. Remove the pump pulley.
8. Loosen the high pressure hose fitting.
9. Remove the return line clamp.
10. Remove the power steering pump mounting bolts.
11. Remove the high pressure hose fitting.
12. Remove the power steering pump while sliding off the low pressure hose.
13. Remove the clips holding the reservoir on the pump.
14. Remove the reservoir.
15. Install new o-ring on the reservoir.
16. Install reservoir on new pump.
17. Install clips to hold reservoir on pump.
18. Install new o-ring on high pressure fitting.
19. Place new pump in position while sliding on low pressure hose.
20. Loosely attache high pressure fitting.
21. Tighten pump to mounts.
22. Tighten high pressure fitting.
23. Install clamp on low pressure hose.
24. Install power steering pulley.
25. Install washer reservoir.
26. Install battery.
27. Install reinforcing cross member.
28. Install fuse panel.
29. Install serpentine belt.
30. Bleed the power steering system.

Dec 13, 2012 | 2008 Chevrolet Uplander

2 Answers

Replace power steering pump on 06 chevy uplander


I just finished replacing mine.

It is much easier if you do these steps:

1. Remove the serpentine belt.
2. Remove the nuts holding the main fuse box over the battery.
3. Remove the reinforcing bar over the battery.
4. Remove the battery.
5. Remove the windsheild washer tank.
6. Now you have access to remove the pump pulley. Without removing the stuff, it may be possible, but it will be extremely difficult.
7. Remove the pump pulley.
8. Loosen the high pressure hose fitting.
9. Remove the return line clamp.
10. Remove the power steering pump mounting bolts.
11. Remove the high pressure hose fitting.
12. Remove the power steering pump while sliding off the low pressure hose.
13. Remove the clips holding the reservoir on the pump.
14. Remove the reservoir.
15. Install new o-ring on the reservoir.
16. Install reservoir on new pump.
17. Install clips to hold reservoir on pump.
18. Install new o-ring on high pressure fitting.
19. Place new pump in position while sliding on low pressure hose.
20. Loosely attache high pressure fitting.
21. Tighten pump to mounts.
22. Tighten high pressure fitting.
23. Install clamp on low pressure hose.
24. Install power steering pulley.
25. Install washer reservoir.
26. Install battery.
27. Install reinforcing cross member.
28. Install fuse panel.
29. Install serpentine belt.
30. Bleed the power steering system.

Jul 08, 2012 | 2006 Chevrolet Uplander

5 Answers

I have been getting Charging System Failure messages on my instrument panel and when this happens the steering freezes up (no power steering). I have had it into the dealer and they changed the alternator...


your idle air controller valve on the throttle body may be no good.if the idle speed drops too low,the alternator will have no output,and the steering rack which on the uplander i believe is electric like the cobalt,will not put out enough drive.if you shut off the vehicle,but leave the ignition on,and it has an electric rack,the steering should still work.if it doesnt it is hydraulic assist.if the idle speed goes to say 400 rpm,the power steering will not work .when this happens,check the tachometer what the rpm is...

Jul 13, 2009 | 2007 Chevrolet Uplander

1 Answer

Disable/mute Uplander blinker noise


change the blinker fluid jk remove the blinker switch fuse or power wire.

Jan 20, 2009 | 2006 Chevrolet Uplander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...