Question about Hyundai Motor 2002 Elantra
No power to wipers head lights and heat fuses apeares to be intact could it be a relay ?
Please check for codes in the OBD system. Check Battery and Charging System. If no codes perform following test procedure.
Tests/Procedures: 1. Check the Black power connector in the under dash fuse box. Wiggle it with the lights on and see if they malfunction.
2. Wiggle the wiring harness from the ignition switch around the steering column with the lights on and see if they malfunction.
3. Monitor the key on battery voltage from the ignition switch at terminal 3, Red wire at the ignition switch to terminal 3 of connector I/P-E in the under dash fuse box.
4. See if the vehicle has any aftermarket accessories installed that may be tapped into that Red wire from the ignition switch to the fuse box.
Potential Causes With OEM Direct diagrams, components, TSBs, and R&R procedures
Output Speed Sensor (OSS)
Steering Column Wiring
Posted on May 04, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you ask which fuse , its fuse #22 for front wipers and washer . its a 20 amp , here is a picture to help identify , and locate . cheers .
Posted on Jan 11, 2009
Go to www.hmaservice.com and register your vehicle by VIN #. You'll then have access to shop manuals, service bulletins, wiring diagrams, etc. Hope this helps.
Posted on Sep 06, 2009
Then 1, bulbs are burned out
OR 2, the wiring is faulty.
Posted on Nov 04, 2009
Testimonial: "thanx for the solution. took the car to a repair shop and was told that the wiring was faulty. had the car rewired."
It could definately be the wiper relay, and it could also be the wiper motor. If you put a long screw driver on the relay and have someone turn the wipers on with the key on, you should be able to hear the relay clicking as it opens and closes. Sometimes you can put your finger on the relay and feel the relay switching. If you can hear/feel the relay then the next step is the wiper motor. Hope this helps.
Posted on Mar 23, 2011
Tips for a great answer:
Sep 21, 2016 | Hyundai Motor 2002 Elantra
Apr 05, 2016 | Dodge Cars & Trucks
May 23, 2011 | 2005 Jeep Liberty
Aug 12, 2017 | 2002 Dodge Durango
Aug 20, 2010 | 1994 Jeep Grand Cherokee
Aug 19, 2010 | 1994 Jeep Grand Cherokee
Aug 01, 2010 | 1994 Jeep Grand Cherokee
Jan 09, 2010 | 2002 Volkswagen Cabrio
Oct 22, 2009 | Hyundai Motor 2002 Elantra
Apr 19, 2009 | 2002 Ford Taurus
249 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: