Question about Nissan Pulsar

1 Answer

Nissan pulsar 1997 temperature guage rising and then the car putts and then cuts out and while idling

I have just recently changed the distributer replaced the air flow sensor with a second hand part. spark plugs oil and filter change

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,087 Answers

I would look at the fan switch plug see if you plugged it back in. You can hear the switch click right before the fan kicks on. Open the hood start the car let it get to operating temp watch the fan make sure it kicks on. If not look at the wired plug that connects to the temp switch if its all secure but the fan doesnt kick on. Look for the relay fuse check it if good then the switch is bad.

Posted on Apr 06, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the coil pack located at on a 1987 Nissan Pulsar. Also spark plugs been changed car still not starting


The link will show you what it looks like. If you follow the leads back from the spark plugs, that will take you to the distributor 9a circular cap with 5 wires). In the centre of the distributer, there is a single lead, follow that one and it will take you to the ignition coil. 1987 Nissan Pulsar NX Ignition Coil Hitachi

Sep 19, 2015 | Nissan Cars & Trucks

2 Answers

Have a n16 pulsar will not idle when it gets to running temperature can the idle be adjusted


no they cant, could be an air leak after the airflow meter, could be a faulty air flow meter or faulty idle motor. with nissans computer can carry out an "idle volume learn" that will reset the idle motor. or even check the basics, oil level and spark plug condition

Mar 07, 2014 | Nissan Cars & Trucks

1 Answer

Not getting a rising in temp gauge


the wire going to the temperature sensor is dis connected, or not functioning, .. on the instrument cluster the temperature gauge is also damaged the arm is stock up. Try to connect the wire to the body ground if you see the arm on gauge goes up the problem is the temperature sensor.

Aug 22, 2011 | 1988 Nissan Pulsar

1 Answer

Hi, how are u all, I have a nissan sunny 1984 130 Y , with a very good condition, recently i skim the engin head, for now evry thing seems good except that the cooling fan won't work untill the temperature...


Normally the fan will not come on until the temperature is high enough to open the thermostat then your fan will come on. It sounds like it's working the way its ment to. When you turn the a\c on the fan will come on to keep your engine cool.

Mar 22, 2017 | 1997 Nissan Sentra

1 Answer

Hi there, The temperature guage is not working and the isolating fan won't come on. Fitted a new therostate and 2 new twmperature bulbs. Nissan Pulsar N13. 1990. Can anyone help us with this problem....


First go to ur dealer and SCAN/DiAGNOSE ur computer w/ their computer. Mostly that model has a computer problem that inhibits the temperature and fan from operating properly!
Seen that problem when I used to work in nissan! Check that first and tell me wut happen!
Nice helping somebody!

Nov 23, 2010 | 1990 Nissan Pulsar

3 Answers

1997 Honda Accord temp guage goes up and down. It goes up when when idling @ a traffic light. It rises in between the half way mark and the H. When I accelerate it goes below the half between the C. What...


If it is not an instrumentation problem then you have to assume the coolant is heat cycling. It could be because the cooling fans are not coming on due to the temperature switch, fans or relay. This would explain why the temperature increases when you are stopped and decreases when you are accelerating and air is moving over the radiator.

Jun 04, 2010 | 1997 Honda Accord

1 Answer

The oil pressure guage on my 2006 nissan frontier is reading very high after recently changing the oil, however, the correct amount of oil was added during the change. Furthermore the oil dipstick...


The guage may rise a little when you accelerate the vehicle...but if it is pegged high, and does not fluctuate, when you turn your ignition key on an off...Your oil pressure switch maybe going bad...Goodluck

Dec 04, 2009 | 2006 Nissan Frontier

1 Answer

1997 pickup stalls


coil or crank sensor is probably bad

Oct 06, 2009 | 1997 Nissan Pickup

1 Answer

Fuel Guage Problem on Nissan Pulsar N14


Either the sending unit in the tank is bad, or the gauge is bad.

Mar 09, 2009 | Nissan Pulsar Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...