Question about 2003 Renault Renault Scenic 1.6

1 Answer

Cant select reverse when engine is running - 2003 Renault Renault Scenic 1.6

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Renault Master
  • 2,963 Answers

Automatic or manual? I take it you can select reverse when engine is not running? Wild guess, linkage from shifter to transmission is out of adjustment, or the bushings on the linkage is bad. They wear out. Recommend a dealer or very knowledgeable shop.

Posted on Apr 06, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Isuzu kb250 diesel engine model 2008 it doesn't want to take gears when running


YOU probably have a problem with the clutch not fully releasing when you are driving.


Clutch Drag Kills Synchros

Feb 02, 2016 | Isuzu Cars & Trucks

1 Answer

2000 a4 w0nt select 1st gear or 2nd or reverse with engine runnin bu


SMELLS LIKE SOMETHING NEEDS TO BE CHANGED AND THAT IS PROBABLY THE CLUNCH!!

Feb 23, 2014 | Audi A4 Cars & Trucks

1 Answer

Clutch cable geo tracker


don't want to shift? fills a huge basket ,
1: grinds?
2: can't get in to some gears.? or all gears.? (engine running and not)?
3: clutch drags, clutch slips kills all gears, or just 5th.
drag kills them all and reverse 1st , its the canary gear. !! non synchro
4: noise.? or chatter, ****,larchig, or throwout hash ,?

here is the clutch page, link below.

the #1 failure for a gear not Selecting is a $5 fix.
the tip of the shifter shaft, plastic POS is broken, bar none this failure,#1 and sold only at SUZ, get em' while you can they are chapter 11 ANDGM/GEO is brain dead , ask them , and you get blank stares.

this can be proven, by selecting the gears by hand. running.
if failure, cant move those fork rods?
running? only
if you cant, the clutch is dragging. see why?
works stalled means the clutch drags.
can you shift to 1st stalled, start engine drive off can you get any gear? yes,if yes , constantly? with no grinding, the clutch is ok.

to do that manual shifter off test test the shifter must be removed.



the we get to the cable.
see the 1inch rule here, no guessing.
play set to spec, and you floor the pedal , person 2 sees 1 inch travel, (END new cable worry)
if it moves 1inch and the tranny can not be SELECTED.
the clutch is bad, if you can select only stalled motor.
if selection fails all time, stalled and running, the tranny is siezed.
covers every fail logged by 1000s of users

http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Dec 12, 2012 | 1994 Geo Tracker

1 Answer

How do I check transmission fluid


start engine handbrake on and brick behind wheel ,then select reverse and check whilst engine running in reverse ,easy

Apr 15, 2011 | 1995 Toyota Tercel

1 Answer

Went to select reverse and it will not drop in when engine running ..tried other gears and got the same problem...can select the gears when engine not running.....also pedal feels it has no resistance. ...


either clutch not clearing or the pressure plate has failed ,either way its gearbox out job as the slave cylinder is inside the bellhousing

Dec 06, 2010 | 2000 Ford Focus

1 Answer

I am having trouble selecting reverse and first on my subaru wrx its a 08 model is this normal? about 70% of the time it select the gears with no problem i have taken it back to a subaru dealer and they...


get it sorted before the warrenty runs out it has a major problem ,if its an auto but if its manual then its ok this is normal with lots of cars ,the owners dont give it time for the sycros to work

Jul 24, 2010 | 2008 Subaru Impreza Wrx

2 Answers

Reversing lights not working on my 1.6 ford escort m reg 1994. ive checked bulbs but still nothing. someone told me about a switch but i cant find it. any help please???


There is a switch attached to the gearbox which activates the reversing lamps when you place the gearbox into reverse. This switch has two wires going to it, one wire is an ignition live feed and the other is the feed to the rear lamps. This switch is usually on the side of the gearbox but quite high up towards the top of the gearbox. You can remove this switch with no danger of losing gearbox oil and replace it. Using a test lamp (which you can buy from any auto parts store), connect the end with the clip to the body on a clean area to ensure a good electrical connection and the pointy end to each of the wires on the switch in turn. With the ignition on but the engine NOT RUNNING, one wire should be active and the other will become active when the gearbox is placed in reverse gear. If neither of the wires are active, check fuses etc. If one wire is active but the other does not become active when reverse is selected, replace the switch. If both wires do what they are supposed too, check the wiring from the switch back to the rear lamps and check for broken or disconnected wires. The switch can be accessed from underneath the vehicle. Remember that these tests are conducted with the ignition turned on but THE ENGINE NOT RUNNING....

Dec 25, 2009 | 1994 Ford Escort

1 Answer

Transmission stuck in neutral (automatic) won't engage drive or reverse


first i would check the transmission oil, do this by starting the engine and leave it running, select all the gears (park, Reverse, neutral etc) then put it back to neutral, leave engine running then locate the transmission dipstick in the engine bay, remove and wipe the dipstick, replace then pull out again, if the oil is showing between the cold and hot marks then level is ok. I shoing lower or none, top up the oil level with automatic tansmission oil, keep rechecking the oil level as adding oil as to ensure it is not over full. will need to select all gears again before checking oil level again.
If the oil level is correct than quite likley a Transmission failure will require mechanic.

May 02, 2009 | 1988 Nissan Pulsar

1 Answer

Ford scorpio ultima r. reg cant get it out of reverse gear


have you tried putting ignition on (ignition lights on) put your foot on brake and while your foot on peddle then selecting park

Mar 22, 2009 | Ford Granada Cars & Trucks

Not finding what you are looking for?

Open Questions:

See all 2003 Renault Renault Scenic 1.6 Questions

2003 Renault Renault Scenic 1.6 Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

xxxxxx xxx

Level 3 Expert

4885 Answers

yadayada
yadayada

Level 3 Expert

77169 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...