Question about 2003 Ford Explorer Sport Trac

1 Answer

Can i fix the air lock in the fuel tank nozzle

Its hard to add gas to the tank

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 42,561 Answers

Run the fault codes and check for a canister venting problem

Posted on Jun 09, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't fill up with gas. Even when near empty, it shuts off the flow off gas. Makes as "burping noise" then lets me add another gallon or 2 and repeats. Help!


This is a common problem with many vehicles. The filler neck has an anti-siphon flapper in it that prevents siphoning the fuel. This also restricts air flow around the nozzle when filling. There is a vent tube, but it often isn't large enough to purge the air out of the tank as fast as the fuel is running in. There are two ways to alleviate this issue. First is to reduce the rate you fill the tank to allow more time for the air to purge. Another way is to pull the fuel nozzle back slightly from the vehicle to allow more room for air to escape around it. Ensure that the nozzle is still past the anti-siphoning flap however, or you may get fuel splashing back.

Oct 17, 2015 | Hyundai Motor 2003 Sonata

1 Answer

PO441 code comes on- Evap purge control valve. also, when filling the gas tank, the nozzle on the gas pump keeps shutting off before tank is full.


Try not putting fuel nozzle in so far. Fuel flow cuts off on back pressure of the air being displaced by the fuel when filling. Can be a problem with narrow neck tanks and some fuel fillers are more sensitive than others.

Aug 19, 2015 | Cars & Trucks

1 Answer

Loosing power when drining


Hi Jennifer-
I believe I may be able to help you with the gas spillage you are having when filling the tank. This happened on my 1998 Toyota Camry.
One day, even though I was low on fuel, the attendant had trouble adding gas to my tank. Gas would spill during filling or the nozzle would click off (as though it was full) even though it was not. I had to stand there myself and slowly add gas until the tank was full.
I learned that my car had a thin vent tube that would run from the gas tank to the gas tank opening. As gas is rushing into the tank during filling, the air that is being displaced from the gas tank escapes through this tube. This tube had rusted closed a bit and was restricting the air flow escaping from the tank during pumping causing the problems I described. Once this tube was replaced, my problem was solved!
Hope this helps!

Apr 01, 2014 | 1998 Pontiac Grand Prix

1 Answer

Is difficult to fill gas tank


Gas pump nozzles have a device in the end that when gasoline runs back up into it, it turns off the fuel flow." There's a tiny hole near the bottom of the gas pump nozzle connected to a small tube.
Normally, air flows through that tube while you're filling and the gas keeps flowing as long as you hold down on the trigger. When that hole gets covered by gasoline (when your tank is full), a vacuum forms inside the nozzle and an automatic shutoff switch gets tripped, turning off the flow of gas with a thunk. Next time your fueling up try to reposition the nozzle.

Feb 26, 2014 | Chevrolet Cars & Trucks

1 Answer

2001 landcruiser unable to fll fuel - fuel nozzle automatically cuts off


check that the air hose from the tank to the top of the filler pipe is not squashed or crimped by something like a zip tie. This hose allows the air in the tank that is being displaced by incoming fuel to vent at the top of the filler tube and not past the filler nozzle thereby switching it off.

Feb 01, 2014 | Cars & Trucks

1 Answer

With my 2005 Chrysler Town and Country van, I have trouble fueling the vehicle. The nozzle keeps shutting off as if the gas tank is full. What do I need to do?


Usually a sign of a blockage in the vent pipe inside the filler tube, or the vent for the gas tank. Air pressure inside the tank has to be equalized as the fuel is added.

Jan 28, 2013 | 2005 Chrysler Town & Country

1 Answer

Went through automatic carwash with gas cap off and gas cap door open


should have flap door where you put gas nozzle into filler tube to fill up gas tank.if flap door not missing not too much got in gas tank.add more gas and gas treatment to remove water if you have stalling problems drain fuel tank.change fuel filter.

Nov 17, 2012 | 2005 Lexus Ls 430

1 Answer

I can no longer pump gas into tank continuously. The filler backs up and shuts off fuel even when using gas pump manually.


You may have a problem with the fuel tank vent valve. This lets air into the tank as you use fuel and allows air out of the tank as you refill with fuel. If the valve is plugged or stuck shut the fuel nozzle will kick off as you try to refill the tank because the fuel can't get through the fill neck and into the tank as fast as it's being pumped in and will back up high enough to kick the nozzle off. Hope this helps and good luck!

Sep 21, 2011 | 2001 Hyundai Tiburon

2 Answers

99' cavalier, gas line problem?


for petrol to flow into the tank air has to leave it but the air pressure on the filler nozzle willstop the flow,so dont put the nozzle too deep so air has a chance to escape

Jul 07, 2010 | 1999 Chevrolet Cavalier

3 Answers

Can't fill the gas tank on 98 Toyota Camry


I have a 2000 camry that I just fixed today. there is a vent tube and valve on the carbon canister that is located just behind the gas tank and above the cross member. this vent tube will get plugged up by ( of all things ) spiders, dirt daubers, and I even had a mouse pack the tube with dog food. Just remove the tube and the valve from the canister and clean them out. You will now be able to fill your gas tank again.

Jul 20, 2009 | 1990 Toyota Camry

Not finding what you are looking for?
2003 Ford Explorer Sport Trac Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...