Question about Chevrolet Cars & Trucks
1) battery: clean posts.
2) clean and inspect any ground wires.
3) test battery with volt meter.
4) since the other light works remove any. thing that is in the way of getting to light bulbs.
5) twist socket and bulb from light assembly.
NOTE: DO NOT TOUCH BULB with hands, oils from your skin will cause the bulb to burn out.
6) if bulbs are burnt replace, test lights before reconnecting everything.
7) inspect wires for damage and corrosion.
8) use meter to test if you are getting power to lights. If no power to lights when turned on check connection to switches .
9) check switch.
10) check fuses, get wiring diagram.
11) fix or repair as required.
Posted on Apr 06, 2015
If the driver side quit working and the passenger side does then you need to change the light
Posted on Apr 06, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like you still have a wire harness problem for the oil pressure sending unit. if you spliced a new pigtail to the wire harness you may still have a bad connection or there is still a damaged wire farther up in the harness.
Posted on Oct 27, 2009
quite simple you most likly have a broken earth/netural wire broke check it out .adrian;;;
Posted on Nov 08, 2009
Testimonial: "Thank you. I will check the grounds and harness for breaks."
remove both bulbs from the lamps but leave them on their wires switch on and see if the bulbs are still different brightness if not they the passenger side lamp housing has damaged mirror is dirty or missalined and needs adjustment. if they are different brightness then this may be a earthing problem.
Posted on Nov 13, 2009
SOURCE: I have a 2008 Ford
Hi. Since the headlight on the driver side is working then we dont have any problem with the fuse or relay. Check the wiring and the socket of the passenger headlight if it is intact to the bulb. If it is intact, then this could be a headlight problem. Time to replace the passenger headlight.
Posted on Sep 07, 2010
Tips for a great answer:
Jan 24, 2016 | Cars & Trucks
Sep 03, 2014 | Cars & Trucks
Nov 24, 2012 | Buick LaCrosse Cars & Trucks
Mar 20, 2010 | 1983 Chevrolet K1500
Nov 08, 2009 | 1985 Nissan Pickup
Nov 08, 2009 | Nissan Pickup Cars & Trucks
Aug 15, 2009 | 1996 Chevrolet K1500
Jan 27, 2009 | 2002 Chevrolet Silverado
75 people viewed this question
Usually answered in minutes!