Question about 2001 Hyundai Santa Fe

1 Answer

Cylinder 3 and 4 misfire

First time engine light came on it was a cylinder 4 misfire, 2nd time it was cylinder 3 misfire. It idles rough at stop signs when in drive. If I put it in park or natural, the rough idling stops?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Hyundai Master
  • 1,038 Answers

Could be a bad cam or crank sensor. But before you go to electronics, ck the plugs, wires & coil or coils (whichever coil system you have) Start with the plugs

Posted on Sep 20, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 53 Answers

SOURCE: 2000 Hyundai Accent standard transmision stalls when clutch is pushed in

with driving with the check engine light flashing u may have done damage too the catiltic converter check that when u reve the engine there is alot of exhaust flow it should push your hand from the tail pipe (be carefull exhaust will be hot)
It would be helpful if u could list the codes you can buy a code reader from any automotive parts store relitvly cheap

Posted on Oct 18, 2008

  • 4 Answers

SOURCE: Car misses while driving and idling and sometime dies while idlin

did u check spark plug, distributor cap and roter

Posted on Feb 02, 2009

  • 156 Answers

SOURCE: I have a 2001 Ford Escort. It was idling rough and

Well the misfire in Cylinder 3 will commonly be that your plug has gone bad. If that is the only code that it is throwing out then it could be an array of things going on. It sounds though that you may have a throttle position sensor out or that you have your idle speed set too low. You will still have great response when gas is applied but sitting at lights the idle will be rough and sometimes bounce up and down.

Posted on Feb 23, 2009

jryan11kc343
  • 19 Answers

SOURCE: Engine idling high in park. Will not start until

check your IDLER

Posted on Jul 11, 2009

  • 1 Answer

SOURCE: 2001 hyundai elantra idling high

weeeeiiirrdddd. i have a 2001 hyundia elentra gls, and my third cylinder is misfiring as well. my car also revs constantly on idle and in between shifting. it will flutter between 2-3000 or it will just stay at 5000. i replaced my plugs and wires to no fix with my cylinder. autozone also told me that it sounds like my throttle position sensor needs replaced, but every part they try to sell me will not fit and they swear up and down this is the right part...

Posted on Nov 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is code p0300?


P0300 - Random, Multiple Cylinder Misfire Detected Fault Code Definition
  • Random, Multiple Misfire Detected
Symptoms
  • Check Engine Light flashing
  • Rough running, hesitation, and/or jerking when accelerating
  • In some cases, there may be performance problems, such as dying at stop signs or rough idling, hesitation, misfires or lack of power (especially during acceleration), and a decrease in fuel economy
Common Problems That Trigger theP0300
  • Worn out spark plugs, ignition wires, coil(s), distributor cap and rotor (when applicable)
  • Incorrect ignition timing
  • Vacuum leak(s)
  • Low or weak fuel pressure
  • Improperly functioning EGR system
  • Defective Mass Air Flow Sensor
  • Defective Crankshaft and/or Camshaft Sensor
  • Defective Throttle Position Sensor
  • Mechanical engine problems (i.e.-low compression, leaking head gasket(s), or valve problems

Jul 25, 2014 | 2000 Dodge Durango

3 Answers

I have a 99 ford f150. Sometimes it runs perfect, then out of no where when I try to accelerate it vibrates bad and becomea hesitant. When I came to a stop I switched threw all gears and it seems like it...


This sounds like you might have a bad plug wire or something else in the ignition system is arcing to ground. A quick way to verify this is to run the truck in Park at idle. Next, spray the ignition wires with Windex. You'll notice the truck starting to rough up and might even see the bad wire arcing to ground. A complete tuneup would be recommended in this case.
I hope this helps! :)

Jun 11, 2014 | Cars & Trucks

2 Answers

2007 cadillac cts engine cylinder misfire


Error code p0300 indicates rough idle and p0305 indicates engine misfire in cylinder 5. Check for faulty spark plug and its wiring. Also check for ignition coil and distributor. Replacing spark plug and its wiring may resolve the issue.

Jun 28, 2013 | 2007 Cadillac CTS 3.6L

1 Answer

Chevy check engine light


Yes,spark plugs,wire,coils,fuel filter,TPS rough idle,You lackey have all.My car run kind of fanny no light hard to say what wrong.

May 03, 2013 | 2004 Suzuki Verona

1 Answer

3rd cylinder is misfiring. how to fix?


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?


http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Mar 07, 2012 | 2006 Chrysler Sebring

1 Answer

My 2001 oldsmobile aurora is misfiring and sputtering after i replaced the spark plugs?


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Feb 17, 2012 | 2001 Oldsmobile Aurora

1 Answer

Codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough when idling/lexus gs 400 1998


P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Feb 14, 2011 | 1998 Lexus Gs 400

1 Answer

2004 Neon SXT cylinder misfire


TRY REPLACING THE CRANKSHAFT POSITION SENSOR..HAVE SEEN THESE CAUSE MISFIRES AND LOW VOLTAGE DTCS AS PCM THINKS VEHICLE IS NOT RUNNING..ALTERNATOR MAY NOT BE PUTTING OUT PROPERLY

Jul 05, 2009 | 2004 Dodge Neon

1 Answer

2002 Saturn SL1 rough, sputtering idle - cylinder #1 misfiring


spray some carb cleaner on the passeger side of the intake manifold, right behind the alternator. it is very common for those to leak there and cause those exact problems

Apr 30, 2009 | 2002 Saturn S-Series

Not finding what you are looking for?
2001 Hyundai Santa Fe Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...