Question about 2005 Chevrolet Cobalt Sedan
Posted by Anonymous on
Have your tie ends checked!! You can check yourself by going under car and grab drag link and see if you can feel movement. If no movement it should be ok. If it moves by hand get replaced ASAP DO NOT DRIVE!!!!! Drag link is the largest long metal bar at the front under the car.
Posted on Feb 02, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There are only 2 things you can try to fix this yourself: turn off the engine and open the driver side door (to turn the radio off). Wait 5 minutes, start your car.
If that does not solve it, turn off your engine, disconnect the car battery, wait about 5 minutes. Reconnect the battery (negative pole first - black connector) and try your radio again.
If neither one of these two fix your problem, I am afraid only a GM service center or dealership can fix the problem. The Cobalt is notorious for all kinds of electrical issues.
Thanks for using the fixya forums!
Posted on Mar 28, 2009
SOURCE: Turn signals won't flash
the flashing is genreally controlled by a relay switch in your car. probably the fuse for your relay is blown or your realy itsef might need to be replaed.
Posted on Aug 05, 2009
automatic headlights are controlled by a photo sensor on the dash located in front of the Instrument cluster. to test the sensor try covering it and see if the headlights come on. faulty wiring in the circuit could also cause this problem. the headlights and the radio are wired together and the "auto" function will cause the radio to get brighter when its dark out, thus the combination of problems.
Posted on Jan 27, 2010
It sounds like you might need to replace your motor mounts, or get a tier allignement done. The allignment you cannot do yourself but the motor mounts you can this requires you to place a jack under you engine and undoing the motor mounts then replace them and take away jack.
Posted on Jan 30, 2010
Tips for a great answer:
Dec 02, 2013 | 2008 Chevrolet Cobalt
Aug 19, 2013 | 2005 Chevrolet Cobalt
Jan 23, 2013 | 2005 Chevrolet Cobalt
Jan 06, 2013 | 2005 Chevrolet Cobalt Sedan
Feb 04, 2011 | 2005 Chevrolet Cobalt
Nov 22, 2010 | 2005 Chevrolet Cobalt
Aug 01, 2009 | 2005 Chevrolet Cobalt
Dec 20, 2008 | 2005 Chevrolet Cobalt
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: