Question about Cars & Trucks

2 Answers

I have a 95 Chevy aurora 4.0l v8 32 valve and I can't get the valve cover off?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 2,899 Answers

Go to

Search for "Chevy Valve Cover'
They have some good videos there.
Hope this helps.

Posted on Apr 05, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

After insuring that ALL of the screws/bolts/nuts are loose/off, GENTLY tap on the sides with a RUBBER mallet until it pops loose.

Posted on Apr 05, 2015

  • john white Apr 05, 2015

    The cam shaft pully is in the way and we can't get in the way


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Air in radiator

the 4,0l and the 4.6 northstar have the same problem with head gaskets,the head bolts strip or stretch in the aluminum block causing little compress of the head gaskets,the combustion pressure pushes past and enters the coolant.this air in the coolant builds up and pushes the antifreeze out causing an overheat situation.recommend head studs not head bolts..again gm missed the boat or did it on purpose to generate work for the dealerships...

Jan 23, 2013 | 1995 Oldsmobile Aurora

1 Answer

Got a 95 aurora and it won't start changed a lot

It could be the antitheft shutting down your vehicle. This link explains. Something to look for.

Mar 11, 2012 | 1995 Oldsmobile Aurora

2 Answers

Where is the ecm located on a 95 aurora?

under passenger dash where the floor light is remove black cover held down by 2 7mm bolts. the pcm has red white an blue connectors

Jan 08, 2010 | 1995 Oldsmobile Aurora

1 Answer

How to replace valve cover gasket on 4.0L olds aurora

What you want to do is find the valve cover, take the 8 bolts i believe out of the valve cover. You may have to pull the valve cover off with a small flat head screw driver to release it from the old oil and grease thats on the motor. It gets pretty caked on there from the heat and what not. Once the valve cover is off, make sure you dont get any dirt down in the motor, this is very crucial. You now have to get the old gasket off the valve cover. I recommend you getting the old stuff off with a paper towel and a razor blade. Make sure its 100% clean as your can get it. Make sure its off the motor and the valve cover.
At this point you take and bolt the valve cover on with the new gasket and your finished! Hope this helped!

Dec 06, 2009 | 2001 Oldsmobile Aurora

1 Answer

Install headlight for 95 oldsmobile aurora

remove the retainers from the back,and remove the headlight as a whole from the front,and replace the bulb inside,do not touch the new bulb on the glass part.

Nov 14, 2009 | 1995 Oldsmobile Aurora

1 Answer

How do you Replace 1999 Oldsmobile aurora valve cover gasket?

take the top cover off there are a few bolts and then it should get you to the cover itself take those bolts out and it should be off dont forget to scrape all of the old gasket off before you put on a new one

Oct 26, 2009 | 1999 Oldsmobile Aurora

1 Answer

Seat wont move back

Open the door and pull back the boot that covers the wires. You should be able to push it into the door to give a good look and room to splice the broken wires. Put the boot back when done.

Apr 21, 2009 | 2001 Oldsmobile Aurora

4 Answers

1995 Oldsmobile Aurora Oil Pan Leak

yes and no, i wouldnt recomend it with aurora.. i had same leak from the oil pan and put in the bars and it stopped the leak for a couple weeks. after that it leaked the same as before. i would never use it again on any of my cars.. i had a friend put in new pan gasket and it stopped the leak... i believe this is pretty common with the it 95?

Dec 27, 2008 | 1995 Oldsmobile Aurora

1 Answer

95 chevy lumina van

if you fallow the hose comming out of air filter assembley it should lead you to the pcv valve the hose goes to the pcv and should come right off then you take the pcv valve out of the valve cover by just pulling it out and replace it with a new one

Jun 15, 2008 | 1995 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides