Question about 2001 Hyundai Sonata

1 Answer

Where is routing belt located on Hyundai Sonata 2001 Alternator?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 1,871 Answers

I believe you are referring too the Accessory Drive Belt for the Alternator...See attached drawing



Where is routing belt located on Hyundai Sonata 20 - 25629874-2mhejhdcommskt1vzkafo1v3-3-0.gif To Remove:

  1. Raise and support the vehicle.
  2. Remove the engine splash shield.
  3. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  4. Remove the drive belt from the alternator.
  5. Slowly release the drive belt tensioner.
  6. Remove the drive belt from the accessory drive pulleys.
To install:
  1. Install the drive belt to the accessory drive pulley.
  2. Rotate the drive belt tensioner clockwise.
  3. Install the drive belt to the alternator.
  4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  5. Slowly release the drive belt tensioner
  6. Install the engine splash shield.
  7. Lower the vehicle....saailer

Posted on Apr 05, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the belt routing for a 2007 Hyundai sonata 2.4 liter


I found it and im sending it IF it doesn't show up go to =auto zone and list your vehicle ,under my vehicles, (its free)then go to repair help then to specifications then to belt routing , I hope you get it .if this is a help to you let me know .
Woody

Sep 15, 2014 | 2007 Hyundai Sonata 2.4

1 Answer

What is the correct 2007 sonata sepentine belt routing i installed a new altenator but aqm having trouble?


If the belt is tight, then it was probably routed around all the pulleys correctly.

Aug 10, 2014 | 2007 Hyundai Sonata 2.4

2 Answers

How to bypass the ac pulley on a 2003 hyundai sonata


You can bypass the ac compressor by using a 82" belt. Feed the belt from the back of the engine at the water pump. Disconnect the power steering line at pump. It's a lot easier if you use some type of hook to hold/maneuver the belt. (I used a bent rebar) Follow this routing diagram I created. Bam! No more ac problems!
1_31_2016_11_37_40_pm.jpg

Sep 03, 2012 | Hyundai Santa Fe Cars & Trucks

1 Answer

WHERE IS THE SERPENTINE BELT LOCATED ON A 2003 HYUNDAI SONATA


Vehicles Covered: Hyundai Sonata 2002-2004 (2.4L & 2.7L Engines)

In 2003, Hyundai produced two types of Sonata:
Available engines:
4 Cylinders 2.4L VIN "S", MFI DOHC - see Figures 1 and 3.
6 Cylinders 2.7L VIN "H", MFI DOHC - see Figures 2 and 3.

To differentiate between these types of 2003 Hyundai Sonatas, the VIN 8th digit (Engine Type) will either be "S" or "H" as in the table above.

To locate the Engine drive belt, jack up the vehicle & place it onto jack stands, then slide under the car (toss a cardboard mat down first), then, once under the car, remove the (plastic) engine splash shield. Once removed, the drive & accessory belts are easily observed.

12_27_2011_5_25_29_am.jpg

Fig. 1 Accessory Drive Belt Routing 2.4L (4 cyl) Engine - Hyundai Sonata
The "COMPRESSOR" refers to the A/C compressor, and "GENERATOR" refers to the Alternator.


12_27_2011_5_27_01_am.jpg

Fig. 2 Accessory Drive Belt Routing 2.7L (6 cyl) Engine - Hyundai Sonata
The Belt Routing on the Left is "With A/C", on the Right is "without A/C"

Inspection - Drivebelt and Accessory Belts

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. Worn or damaged drive belts should be replaced.

Drivebelt Removal & Installation - 2003 Sonata (2.4L and 2.7L engines)

Raise and support the vehicle.
Remove the engine splash shield.
Rotate the drive belt tensioner clockwise to release the drive belt tension.
Remove the drive belt from the alternator.
Slowly release the drive belt tensioner.
Remove the drive belt from the accessory drive pulleys.

To install:

Install the drive belt to the accessory drive pulley.
Rotate the drive belt tensioner clockwise.
Install the drive belt to the alternator.
Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
Slowly release the drive belt tensioner
Install the engine splash shield.
Lower the vehicle.

Here's the best illustration I can find of the Hyundai 2.4L and 2.7L engines - the drivebelt seems to be located on the passenger side of both of these transversely mounted engines.

12_27_2011_6_03_16_am.gif

Fig. 3 Hyundai 2.4L and 2.7L engines - Underhood sensor locations 2002-2004 only

Glossary of Acronyms
---------------------------------
A/C - Air Conditioning
DOHC - Dual Overhead Cam
MFI - Multi-port Fuel Injection

Dec 25, 2011 | Hyundai Motor 2003 Sonata

1 Answer

Im looking for a serpentine belt routing diagram for a 2001 hyundai sonata


CLICK on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/sonata/2001_hyundai_sonata_drive_belt_routing_diagram.htm

Mar 01, 2010 | 2001 Hyundai Sonata

2 Answers

How do i remove a belt from a 2001 hyundai xg300 car


Removal & Installation
  1. Raise and support the vehicle.
  2. Remove the engine splash shield.
  3. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  4. Remove the drive belt from the alternator.
  5. Slowly release the drive belt tensioner.
  6. Remove the drive belt from the accessory drive pulleys.
To install:
  1. Install the drive belt to the accessory drive pulley.
  2. Rotate the drive belt tensioner clockwise.
  3. Install the drive belt to the alternator.
  4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  5. Slowly release the drive belt tensioner
  6. Install the engine splash shield.
  7. Lower the vehicle.

6a7dc59.gif
Accessory drive belt routing—1.5L engine

09edb85.gif
Accessory drive belt routing—2.0L engines

750e1de.gif
Accessory drive belt routing—2.4L engines

8b223d7.gif
Accessory drive belt routing—2.5L and 2.7L engines

5315739.gif
Accessory drive belt routing—3.0L and 3.5L engine

Oct 17, 2009 | 2001 Hyundai XG300

1 Answer

I have a 2001 hyundai sonata and the belt broke. i tried to replace the belt but i cannot seems to get it on i removed the top alternator bit and loosend up the bottom one i got about a inch or so but...


I do not have the specific data on this car but look at the tensioner carefully to see if there is a square cutout where you can insert a ratchet or it might be a spanner. Apply pressure as if tightening or loosening it, it should move quite a bit so the belt can be installed. If it does, put back everything together, route on the belt over and around the pulleys (look at diagram for car). Pull or push forcefully on the tensioner and slip on the belt. You can use a piece of pipe over the ratchet for leaverage. Make sure the engine is cold and be careful not to scrape your knuckles. Let me know what you find out. Hope I can help.

Jun 11, 2009 | 2000 Hyundai Sonata

1 Answer

Can an Alternator Belt installation cause a timing belt problem?


I cannot see any reason for the belt to cause timing belt to jump. unless they messed up something installing belt.might wanna get a second opinion

Oct 22, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
2001 Hyundai Sonata Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8737 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...