Question about 2006 Ford Escape XLT

1 Answer

Can a 2006 Ford Escape auto transmission from a 4 cyl fit onto a V6 engine? What needs to be done to make it work?

It looks like the starter mounts in a different spot.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,095 Answers

I have no experiance ,ask me about a jag or a renault yes but a american model ,well many moons ago i worked for the ford motor company in dagenham UK and most parts are interchangable to keep costs down so i would have another look and see if you need to change the bell housing only as knowing ford they are the same gearbox but with a different bit here and their .

Posted on Apr 05, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4 cyl. Where is the idle air control valve located?


On the top of the engine mounted to the intake manifold.

Feb 26, 2016 | 2006 Ford Escape

1 Answer

How to replace the engine/transmission mounts on 2003 ford escape V-6 4 wheel drive?


Remove shields and main centre bar , use heat or have to cut bolts and replace them , replace all 4 engine and transmission mount as one goes all goes . Get original parts as the rubber on other ones will not hold and has to be replaced very soon again , especiallly with sport driving conditions . A mufler shoppe is best for this work .

Dec 14, 2014 | 2003 Ford Escape

1 Answer

Need to change the rear coil/spark plugs on Ford escape 2006. Need engine diagram to do it.


Need to remove upper intake manifold

You can see the coils on the front or left bank

I'm referring to a V6

1,2,3 right side of motor -next to firewall
4,5,6 left side of motor-next to radiator

If you have a v6 do the 3 coils while your there & intake is off
& save them for some time you need them on the left side


We have no diagrams

A code PO301 thru PO306 does not mean a coil is bad

Watch" Wayne"on Real Fixes Real Fast ---on You Tube

You get the plugs & coils from Rock Auto.Com unless
you like spending more at the parts store

Spark Plugs--every 3 years
O2 Sensors--front ones only--100,000 miles
Gas filter & Air Filter -3 years
Trans & Power Steering Fluids -3 years or failure isn't far away


Try to use th OE Brand Plugs on a ford
The tip configuration etc is important
Because it show ten plugs that fit they may
not work well


I would have the motor checked with professional
scan tool software in Mode #06 & look for cylinder
misfire on a road test of 20 miles,before I did any
of the work your going to do. That may show you some
failing coils. Codes are next to uselss
I have had to walk new coils form one cyl to the next
even when the scanner didn't pick up anything

Oct 03, 2012 | 2006 Ford Escape

1 Answer

On the 2005 escape what is the engine or engines available for that year. i was told one was mazda


(8th digit of the VIN code is the Engine) H eng.code a 2.3L 4 cyl. Hybird/ Z eng. code a 2.3L 4 cyl. / and a 1 eng.code a 3.0L 6 cyl. Couldn't say if one was a Mazda engine. Usually if you have a Mazda part on a Ford it's the Transmission.

Feb 26, 2011 | 2005 Ford Escape

1 Answer

I may have to replace my starter. Is it easy to replace in a 2006 Ford Taurus, can I do it myself? . How much should it cost to take it to a repair shop?


hi this depends on what engine/motor is fitted as there are a two different types of starter motor, first one is a top mount starter and the other is an inserted side mount, depending as i said which engine/motor you have got, but they are both easy to fit for an armature mechanic if you have the tools to do it it is only 3 or 4 bolts and 2 wires, you are looking at possibly 70 to 100 US to fit one, not including the price of the new starter..hope this helps please vote thanks

Jun 09, 2010 | 2006 Ford Taurus

2 Answers

Will a 87 ford ranger v6 4 wheel drive trans. fit in a 86 ford ranger 4 cyl 4 wheel drive


If automatic transmission wont work engine block's are not the same, if stander transmission you could swap out bell housing held on with four bolt's from one to the other. Good luck and hope this was very helpful.

May 19, 2010 | 1986 Ford Ranger 2WD

4 Answers

Does the 3.0l transmission fit on the 4.0l engine


Hiya,

There are 5 automatic transmissions used in the Ford Ranger, Explorer and Mountaineer. They may be identified by checking the transmission code on the Safety Standard Certification Label attached to the driver's side door post, in the space marked Trans. The transmissions can also be identified by a tag attached to the lower left hand extension attaching bolt. The transmission codes are as follows:
  • 1991–94 code T is for the A4LD transmission
  • 1995–99 code T is for the 4R44E (2.3L, 2.5L & 3.0L) or 4R55E (4.0L) transmission
  • 1996–99 code U is for the 4R70W (5.0L) transmission
  • 1997–99 code D is for the 5R55E (5-speed automatic) transmission
So, what you need to do now is...establish from a FORD workshop, whether both the A4LD and 4R55E transmissions share the same components and mounting dimensions.

Cheers,

Scott

Nov 12, 2009 | 1992 Ford Ranger

1 Answer

Need to know will a 3.0 v6 out of a 93 fit in my


you will need to change engine and transmission along with the engine wiring harness and computer also if your 2.3 was carburetorated you will need the fuel pump out of the fuel tank .
also remove the engine frame mounts and the transmission cross-member from the 93 might also need changed.

Nov 11, 2009 | 1986 Ford Ranger 2WD

1 Answer

2005 Escape starter replacement


take the negative side off the battery put the car on ramps secure the rear end so it does not roll and if you need a diagram for removing and installing the starter try autozone

Jan 17, 2009 | 2005 Ford Escape

Not finding what you are looking for?
2006 Ford Escape XLT Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...