Question about Mazda Cars & Trucks
Looks impressive and how i envy you because in spain we are not allowed to customise a vehicle ,it will not pass the yearly inspection if its not standard,as for the problem well i would need a play to locate the problem as i have never seen a air ride system only on fast and loud on the TV or on the range rover which would be different
Posted on Apr 05, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have the coil spring suspension, then your spring for that corner has really sagged[doubtful] I suspect you actually have the rear air suspension ,and the air spring for the Right/Rear has lost air, allowing the rear end to lower down greatly. Usually, you need a new air spring when one develops a leak. You may or may not be able to see the leak with a spray solution of soapy water after the spring is removed for inspection. Sometimes you have to apply about 20psi of air pressure into the spring to inflate it a bit, then put the spring under water in a big enough tank/tub of water to catch the leak that way.
Posted on Jun 15, 2009
My car did this. I could actually park and feel my car raise up or down. Looking at my car it was sitting completely crooked as if I had hydraulics. lol I have a 2001 Discovery II. When I had it fixed at the dealer it was the rear airbag which is part of the air ride suspansion. I hope this helps.
Posted on Jul 23, 2009
Hi, There are 4 sensors, 2 pre catalytic converter, 2 post. The driver side is bank 1, and the passenger side is bank 2 .The foreward one in the pipe coming from the driver side is bank1 sensor 1, the rear sensor for the driver side is bank 1 sensor 2 . The other side would be the same, but bank 2. Good luck...
Posted on Sep 23, 2010
Tips for a great answer:
Jul 12, 2016 | Mazda Cars & Trucks
Apr 11, 2016 | Mazda Cars & Trucks
Jan 02, 2011 | Mazda B-Series Truck Cars & Trucks
Aug 16, 2010 | 1990 Mazda B-Series
Jan 23, 2010 | 2002 Ford Escape
Nov 18, 2009 | 1985 Toyota Celica Supra
Jul 31, 2009 | 1999 Mazda 626
Jul 16, 2009 | 2001 Mazda Millenia
Aug 03, 2008 | 1990 Mazda 626
21 people viewed this question
Usually answered in minutes!