Question about Toyota Cars & Trucks
The fuel injector is in the intake manifold or throttle body depending on how the system is equipped. The computer is used to supply ground to the fuel injector in order for it to turn on and off
Posted on Apr 05, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the color of the plastic plug does not matter... You will have two injector plugs with white/red and yellow wires - those two go to cyl#'s 1 and 3.
the other two plugs will have white and blur wires.. those two plugs go to injectors # 2 and 4.
Posted on Jan 14, 2009
Have you checked the 'inertia switch' which in the event of an accident shuts off the fuel supply to prevent a fire . It's usually located in the cab on pass. side. Some models have one reset button, some 2 which have to be pressed at the same time. If that's not it, here's how the power to the pump SHOULD work, you will have to follow the path to see where it stops. When you turn the key on it turns on the EEC power relay on, this relay then provides power to the PCM (power control module) and the control side of the fuel pump relay. Power for the fuel pump is supplied through a fuse link or high current fuse attached to the starter solenoid (battery side). From the fuse link or high current fuse current flows thru the fuel pump relay and inertia switch to the fuel pump. The fuel pump relay is controlled by the PCM. When the ignition switch is turned on the fuel pump will operate, if the switch is NOT turned to start position, the PCM will shut off the fuel pump off after 1 second. This is to avoid flooding the engine when it is not running, just key on. So check out to see if you have a fuse link or a high current fuse and if they are blown.
Posted on Apr 15, 2009
The fuel pump for your truck is in the gas tank. They cost about $142 at Autozone. It's not that hard if you have a basic ability with tools and a little help to raise and lower the tank. Of course you'll need to drain the tank before you start.
Posted on Jul 28, 2009
SOURCE: 1988 4x4 Toyota pickup 22re
The fuel filter in the 1988 4X4 Toyota truck is located in front and above the fuel tank on the right hand side of the truck,
If u desire to change the fuel filter you have to lay under the truck on the passenger side and reach up past the filler hose and there you will find the fuel filter fitted with two bolts on opposite sides across the filter.
Thanks for using fixya..
Posted on Sep 09, 2011
Tips for a great answer:
Apr 13, 2015 | Toyota Cars & Trucks
Sep 02, 2014 | Cars & Trucks
Sep 09, 2011 | 1988 Toyota Pickup
Dec 06, 2010 | 1988 Toyota Pickup
May 21, 2010 | Cars & Trucks
Jan 20, 2010 | 1988 Toyota Pickup
Jul 14, 2009 | 1985 Toyota Pickup
Oct 24, 2008 | 1985 Toyota Pickup
Oct 09, 2008 | 1994 Toyota Pickup
40 people viewed this question
Usually answered in minutes!