Question about 1996 Cadillac DeVille

2 Answers

What will happen if the bolt on flywheel comes a loose on 96 Cadillac Sedan Deville

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cadillac Master
  • 3,218 Answers

You will get a rattle sound when starting the car and a rattle sound when you shut it off. If the bolts get loose enough the flywheel may crack and worse case scenerio break or come off damaging the crankshaft/torque converter or even damaging the transmission case

Posted on Apr 05, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer got voted for 20 times.

  • Expert
  • 208 Answers

What color?

Posted on Apr 05, 2015

  • Aqeisha Wells
    Aqeisha Wells Apr 05, 2015

    White on white

  • Trevor Turner Apr 06, 2015

    Nothing good! Avoid this scenario at all cost. My friend above pretty much covered it; youre looking at a major F-up if it happens.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rear main seal cadillac sedan deville 1980

remove the transmission , (clutch if manual) flywheel then seal
get a workshop manual as the procedure is too complicated to explain it here

May 31, 2017 | Cadillac Cars & Trucks

1 Answer

Which direction does the flywheel retention bolt turn on a 1986 deville transverse v8?

Counter-clockwise to loosen, whether it is the flywheel or crank pulley. Use NEW bolts and red Locktite when you reinstall.

Feb 07, 2015 | 1986 Cadillac DeVille

1 Answer

96 Cadillac Sedan Deville overheating. Changed water pump and hoses, now a radiator. Still spiked to 237 degrees. Tired of throwing money at it. I need answers please.

Have it tested for combustion gases in the cooling system. They have a known problem with the head bolts pulling the threads out of the aluminum block.

Sep 05, 2013 | Cars & Trucks

1 Answer

I have a "96 Cadillac

The engine transmission with cradle need to be removed and separate the engine from transmission and cradle! Sorry

Aug 08, 2011 | 1996 Cadillac DeVille

1 Answer

What size bolt holds the water pump on a 1989 4.5 litre caddy sedan deville

Hello: There are 3 15mm bolts 10 10mm bolts and two round bolts with a star insert in the bolt head (like a allen head only this star shaped. Also may have 1 15mm stud depending on configuration.

Nov 03, 2010 | 1989 Cadillac Sedan DeVille

1 Answer

How do you change the transmission fluid in a 1996 cadillac deville sedan with a 32 valve northstar v8?

put it up on jackstands ,be very carefull .take transmission pan bolts loose and drain fluid into a bucket or pan.once the fluid is drained remove bolts from pan change filter and gasket.

Oct 19, 2010 | Cadillac DeVille Cars & Trucks

1 Answer

A/c on 96 sedan deville


Jun 25, 2009 | 1996 Cadillac DeVille

1 Answer

1997 cadillac deville feels like i,m running over rumble strips when pulling out what could this be? the dealer told me he thinks the tork converter could this be so?

well it has to be something that is turning right. If it is the torque the bolts are loose and that could cause major damage. check that and look around at the flywheel to see if something is rubbing

Mar 20, 2009 | 1997 Cadillac DeVille

2 Answers

Can not find the body control module on my 1989 cadillac sedan deville -- anyone know where it is?

you need to take glove box out. It's right behind three three 7mm bolts for the plastic piece that holds it in. two 10 mm nuts that hold it to the plastic piece. Should come right out with a little finessed force.

Sep 23, 2008 | 1989 Cadillac Sedan DeVille

Not finding what you are looking for?
1996 Cadillac DeVille Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides