Question about 2007 Nissan Maxima

Open Question

I have a 07 maxima with abs tcs/off slip and brake lights all on what do I do I replaced driver side rear hub speed sensor already still all lights say on..... any suggestions welcome

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
pal03246
  • 726 Answers

SOURCE: TCS, SLIP and ABS lights on

Check your brake fluid first. If that is low, top it off and recheck. If its ok, than you will need one of the rear ABS sensors. You will need to plug it in and find out which side it is. That's really the only ABS issue that car has. One of the rear ABS sensors fails.

Posted on May 09, 2009

Ad
  • 314 Answers

SOURCE: 04 Maxima abs light and brake light on

The first step in diagnosing this problem is to hook it up to an ABS scan tool and see what trouble codes it has put out.

Posted on Jun 12, 2009

MNfisherman
  • 11896 Answers

SOURCE: i am planning to buy a nissan maxima.but the

This wouldn't make the tranny slip. It is making abs kick on when it shouldn't. there is a faulty in the system, most likely abs system causing this. It should be broughten to dealer honestly and I am a mechanic tell you this. It may be bad pump or circuit. I would pull the abs fuse that is in the fuse center under hood most likely. This will prevent abs from locking up on your or quit working on you. Until you get it repaired

Posted on Aug 27, 2009

  • 43 Answers

SOURCE: 350z speedometer stuck at 0 with VDC.TCS/ABS/Slip lights on

check the cable which leads from the tranny to the dash, most of the time the cable or sensor went bad

Posted on Sep 23, 2009

czaa
  • 4536 Answers

SOURCE: The ABS, TCS OFF,and SLIP warning lights are on in my 2000 Nissan Maxima. What's the cause and fix?

cud be dirty or low brake fluid----or bad abs module--or more------have system inspected by a brakepro soon before it cost alot or u crash

Posted on May 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TCS Light and SLIP Light turned on


There is a VSS (Vehicle Speed Sensor) on the Transaxle and then there are inputs from the ABS that go into the ECM to correlate the variances.... More than likely, you have a DIRTY ABS Sensor. Clean the sensor and the problem will go away. Be careful not to break the sensor when cleaning it.

Apr 04, 2013 | Cars & Trucks

1 Answer

The ABS, TCS OFF,and SLIP warning lights are on in my 2000 Nissan Maxima. What's the cause and fix?


cud be dirty or low brake fluid----or bad abs module--or more------have system inspected by a brakepro soon before it cost alot or u crash

May 09, 2012 | 2000 Nissan Maxima

1 Answer

Started car to come home after grocery shopping and the ABS, SLIP and TCS lights all came on and stayed on all the way home. I have no ABS breaks?


um yes you do and traction control also.youll nned to go to a shop to see what fault codes are stored.rear wheel speed sensor is a common failure on these.

Mar 03, 2011 | 2001 Nissan Maxima

1 Answer

What does abs and tcs stand for the indicator light stays on and needs attention is it the brakes


ABS - antilock braking system
TCS - traction control system

If the warning light is on then there is a fault in the system, usually one of the sensors on each of the wheel hubs that measure the speed of the wheel.

Mar 02, 2011 | 1999 Oldsmobile Silhouette

1 Answer

TCS, SLIP and ABS lights on


Check your brake fluid first. If that is low, top it off and recheck. If its ok, than you will need one of the rear ABS sensors. You will need to plug it in and find out which side it is. That's really the only ABS issue that car has. One of the rear ABS sensors fails.

May 06, 2009 | 2000 Nissan Maxima

5 Answers

When driving the veh seems like the brakes are on


This sounds like the relay switch is gopng to need replaced!
That should fix ta!

Dec 19, 2008 | 2002 Nissan Maxima

2 Answers

TCS/SLIP & Check Engine Light Warning


TCS is Traction Control System,and all TCS's are controlled though the Anti Lock Braking (ABS) system.Here's how it works:Each wheel,or in some cases,only the drive wheels have a speed sensor mounted near the hub or axle,and sends a speed signal to the PCM (Powertrain Control Module).The PCM monitors wheel speed continuously,and if it sees a speed out of the ordinary,say for example the right rear tire is spinning and traveling at a much higher speed than the left rear,the PCM will pulse the brakes through the ABS system on the right rear to slow down the right rear so that the left and right wheel speeds match up,this is how the traction control works.So,if you have a TCS problem,the PCM will see this and set a Dignostic Trouble Code (DTC).You need to pull the DTC's out of the system with a scan tool,diagnose and repair the DTC's.It could likely be something as simple as a malfunctioning wheel speed sensor,but you won't know until the codes are pulled out,as this will point in the general direction.Good luck.

Aug 09, 2008 | 2003 Nissan 350Z

Not finding what you are looking for?
2007 Nissan Maxima Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...