Question about 2004 Cadillac CTS

1 Answer

How to reset power windows after removing old battery

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cadillac Master
  • 373 Answers

If you're talking about resetting the auto-up function, you run the window down, then run it up, and hold the switch on "up" for about 5-10 seconds.

Posted on Apr 08, 2015

Testimonial: "Sorry, It didn't work for me. I'll let you know the final outcome once I take my 2004 Cadillac CTS to the dealership that is going to rake me for $100.00 or more to diagnose the problem. I'll keep you informed......"

  • Robert Veldman
    Robert Veldman May 02, 2015

    Sorry to hear it. I did it several times on my 2004 and 2009 CTS. I didn't even realize the auto-up was a function on my 2004 until I owned for a few years.
    I just had the freaking GM dealer take me for $100, to tell me exactly what I already knew.
    Good Luck

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replaced battery, now auto windows wont come up auto automatically


If on a GM car the battery has been disconnect the windows may need to be reprogrammed
The following steps explain how to program the side door window regulator motors:


  1. Press and hold the power window switch until the window is fully DOWN. Continue holding the power window switch for approximately 3 seconds.

  2. Press and hold the power window switch until the window is fully UP. Continue holding the power window switch for approximately 3 seconds.

  3. The power window regulator motor is now programmed for the express function.

  4. Repeat this process for all of the power windows.

Dec 01, 2015 | Cars & Trucks

3 Answers

2005 Chevy Malibu Maxx cd changer error


You will need to have the radio reset or checked out at the dealer.Ther could be a cd stuck in it.Or the radio/CD player may have be on when the battery power got to low.

Jan 10, 2010 | 2005 Chevrolet Malibu Maxx

1 Answer

Charged battery out of car. reconnected battery, car starts but shows theft prob,oil light but just changed oil and filter,no fan,windows,etc working. gear display blinks all the time. is there a reset for...


There is a reset for the ECU but unfortunately it's not a DIY job. All dealers and most mechanics have the special equipment for an accurate reset.
HINT: Theres an inexpensive device on the market that you can plug into a cars cigarette lighter that will provide power to ECU if you need to remove the battery.

Dec 19, 2009 | 1997 Cadillac DeVille

1 Answer

My 05 tiburon battery was dying so i replaced it then my stereo stopped working its not the fuse is there a reset


Radio 'resets' automatically when power is removed -- so, since you replaced the battery, the time lapse between removal of the old battery and installation of the new battery automatically did it.

Oct 30, 2009 | 2005 Hyundai Tiburon

1 Answer

Remove/replacing side view mirror on a jeep grand cherokee


    Remove the Old Mirror
  1. Step 1 Disconnect the negative battery cable before you take off the grand Cherokee front door trim panel. Remove all screws and clips.
  2. Step 2 Detachthe window trim cover screw, and control lever screw beforedisconnecting the entire mirror trim cover. Remove the rubber coverinside the mirror cover, and disconnect the electrical wire.
  3. Step 3 Remove three nuts from the power mirror using a Torx® star-shaped screwdriver.
  4. Step 4 Pull out the outside rear view mirror. Guide the power wire through the hole in the door.
  5. Install the New Mirror
  6. Step 1 Replace the old mirror. Put the new power mirror in place. Push the new wiring through the hole in the door.
  7. Step 2 Install and tighten the three retaining screws you took off when removing the old mirror.
  8. Step 3 Connect the power mirror wiring to the connection located on the door panel. Replace the rubber cover and interior mirror cover.
  9. Step 4 Put the front door trim panel back in place by securing all clips and tightening all screws.
  10. Step 5 Connect the Subaru Outback's battery cable to restore the power.

i will recommend i site where you will get all the information you need to remove and replace your side mirror
http://www.wjjeeps.com/mirrors.htm

Sep 10, 2009 | 2004 Jeep Grand Cherokee

1 Answer

2001 Audi TT windows do not open/close when opening/closing door, nor do they continuously go up down with a tap of the button, as they are supposed to do


you had something blocking the window path which reset the software control on the window buttons or had the battery power removed. it will reset itself after at least 30 button operations.

Jul 08, 2009 | 2001 Audi TT

1 Answer

Battery cell is dead in my rx 300 lexus 2001 .


Are Lexus' known for the computer resetting when replacing the battery? If your really worried that the computer will reset... OK, hold on. First let me say that I don't think the computer is going to reset although I have heard of a few instances where "prolonged" time without any power to the computer will cause it to have to be re-initialized by a dealership technician. I give you my advice with great caution. Please, if you do not feel completely confident doing this, then please don't. Here it goes: Use jumper cables to connect your Lexus battery terminals to another vehicles battery. Carefully remove your old battery being careful not to let the positive terminal contact anything conductive, maybe rap it in a plastic bag and duct tape or something. When you install the new battery, connect the negative terminal before the positive. Good luck and please be careful. If you are a smoker, never smoke near an automobile battery... they have been known to explode.

Feb 20, 2009 | 2001 Lexus RX 300

1 Answer

Battery Replacement now resets ??


Whenever battery power is disconnected, windows can "forget" their settings. Lower both windows simultaneously. Then raise them. When closed let go the window controls for one second then pull them up simultaneously again and hold for a count of three.

Thant should reset your windows.

Good luck.

Dec 06, 2008 | 2001 Audi TT

Not finding what you are looking for?
2004 Cadillac CTS Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...