Question about 2004 BMW 5 Series

Open Question

I NEED TO REMOVE THE CENTER SLIDING CENTER CONSOLE TO RE-UPHOLSTER IT..HOW DI I REMOVE IT?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the sliding tray in a 2006 honda pilot to retreive some papers that got under it?


Hi, Clyde I am a Harley expert and I do not normally answer automobile questions but in your case, I will make an exception because when I was a boy I lived in England my best friends name was Clyde Winsley and I happen to own a 2004 Honda Pilot anyways to get those papers out you have to remove the center counsel but before you start this procedure I highly recommend you run down to your local auto parts store and pick up a repair manual, I like the Chilton version for $20-30. For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.piloteers.org/forums/69-2003-2008-pilot/24125-replacing-sliding-tray-lid-console.html
Honda pilot 2012 stuck console
Honda Pilot Honda Pilot Forums

Jul 25, 2016 | 2006 Honda Pilot

1 Answer

How di I replace the armrest in a 2005 Mercedes c230 sedan


I am assuming you are talking about the front center armrest here. You have to start by removing the back cover of the center console along with the vent louvres if equipped. I think this will expose two screws that you need to remove and the armrest will pull out. If you are trying to remove the armrest because the latching mechanism has gotten out of sync, you can fix that in the car. If that's the case let me know and I'll try to walk you through the repair process.

Nov 28, 2014 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

Chrysler center console power outlet fuse


There is a contact point at the rear of the sliding console that is poorly designed and over time, and 'abuse' of moving the center console or it being jostled by children getting in and out, will eventually fail. This is not an eletrical failure, but a mechanical one.

Jul 18, 2012 | 2007 Chrysler Town & Country LX New Cars

1 Answer

I had the dealership address the rattling of the sliding passenger door on our 2002 Honda Odyssey. The removed the inner panel and adjusted the door striker which didn't stop the rattle. Any suggestions...


The sliding door has upper roller, lower roller, and center roller mechanisms. These rollers can become damaged and rattle in their respective tracks. The upper and lower rollers are easy to inspect, as they are at the front of the door (top and bottom) and in plain sight. But the center roller cannot be inspected until the center rail cover (an exterior narrow long panel) is removed.

To remove the center rail cover, first remove the tail light assembly on the affected side. (That procedure can be found by doing a fixya search for "2002 Honda Odyssey brake light replacement"). Now open the sliding door. Notice at the front of the rail cover there is a small bolt. Remove this bolt. Go to the back of the center rail cover and remove the two screws (only accessible when tail light assembly is removed). Then slide the center rail cover rearward to remove it. Now you will be able to inspect the center roller mechanism and door cables. Look carefully for damaged rollers which will let the door wobble in the center track and rattle.

How do these rollers get damaged? When kids climb onto the doors and "slide along". The door guide rollers and latches were not designed to carry much more weight than the door itself.

Mar 28, 2011 | 2002 Honda Odyssey

1 Answer

Need to remove the Windshield Pillar Post in order to upholster it due to burn marks from a cigar.


Hello: Remove the black rubber seal that covers the edge then gently grab it at the top and gently pull out, it is held in place with metal and plastic clips.

Jan 27, 2011 | 1998 Cadillac DeVille

1 Answer

Upholster


Go to Auto Upholster. Dealer covers are too expensive.

Apr 30, 2010 | 2003 Ford Expedition

1 Answer

Removing sliding hatch in the center console.


You can remove the dash fairly easily. There are a few screws (check by the peddles and open the doors and look there for screws). The rest of the dash just literally pops off. Once that is off you should be able to get to the ashtray/inside the dash to locate said item.

Apr 10, 2010 | 1996 Toyota Avalon

1 Answer

My sunroof is not able to be closed. It is in the pop up position. Is there a manual way to close it? eg no use of electricity?


there is no manual method. It sounds like a limit switch is not working. Can you hear the motor try to operate? If you push up on the back of the glass a little bit while hitting the switch, what happens.

go here for villager help

http://groups.yahoo.com/group/villagerquest/


The sliding roof panel system consists of the following components:
  • RH circuit breaker
  • Timer module
  • Power window relay
  • Roof sliding panel switch (15B691)
  • Roof glass panel (50054)
  • Sliding roof panel motor (15790)
  • Halo moulding
  • Roof sliding panel headlining (519A02)
  • Roof sliding panel slide links (502M78)
  • Roof sliding panel housing (502C22)
  • Roof air deflector (500A26)
  • Center green diode strip
-------------------------------------
When the roof sliding panel switch is activated, a gear on the sliding roof panel motor drives a spline on the roof sliding panel housing. Within the roof sliding panel housing, the spline is connected to two sliding roof panel cables which cause the roof sliding panel slide links to slide and the roof glass panel to open or to close. The sliding roof panel cables and the spline are part of the roof sliding panel housing. Neither the sliding roof panel motor nor the roof sliding panel housing can be disassembled. If a malfunction is detected with either of these assemblies, the assembly must be replaced.
----------------------------------------------------------------------------
VISUAL INSPECTION CHART Mechanical Electrical
  • Damaged sliding roof panel
  • Sliding roof panel height adjustment
  • Sliding roof panel fore and aft adjustment
  • Blown fuse(s):
    • 30A PWR WDW
  • Damaged circuit breaker #1
  • Damaged wiring harness
  • Loose or corroded connections

------------------------
  • Sliding Roof Panel Does Not Open or Close
  • Fuses.
  • Circuit breaker #2.
  • Power window relay.
  • Sliding roof panel motor.
  • Roof sliding panel switch.
  • Circuit.
  • GO to Pinpoint Test E1 .
  • Sliding Roof Panel Will Not Stop in Vent Position
  • Sliding roof panel motor.


Switch Removal
  1. Disconnect the battery ground cable (14301).
  1. Gently pry the overhead console from the headliner.
  1. Disconnect the sliding roof panel electrical connector from the overhead console.
  1. Disconnect the rear quarter window switch electrical connector from the overhead console, if equipped.
  1. Disconnect the map lamp electrical connector from the overhead console.
  1. Remove the overhead console.
  1. Remove the two roof sliding panel switch screws and the roof sliding panel switch (15B691).
--------------------------------------------------------------------------------
Motor Removal
  1. Place the roof glass panel (50054) in the closed position.
  1. Remove the roof headlining (51916). Refer to Section 01-05 for the removal procedure.
  1. Remove the two sliding roof panel relays from their brackets.




  1. Disconnect the two sliding roof panel motor electrical connectors.
  1. Remove the two sliding roof panel motor screws and the sliding roof panel motor (15790

Jan 11, 2010 | 1997 Mercury Villager

1 Answer

My 2001 Mercury Cougar moonroof is stuck, it opened a few inches then just stopped. Is there a way I can manually close it?


Check fuses #21 40 amp check relay jump 12 volts to motor circuit
Overhead Console Removal
  1. Disconnect the battery ground cable.
  1. NOTE: Remove the interior lamp as a unit.
    Ease out the interior lamp.
    • Disconnect the electrical connectors.
    v4301245.jpg
  1. Remove the overhead console screws.
    v4301246.jpg
  1. Remove the overhead console.
    • Apply an even downwards force to both sides of the console.
    • Disconnect the roof opening panel switch electrical connector (if equipped).
    • Disconnect the information and message center electrical connector (if equipped)
-----------------------------------------------------
SECTION 501-17: Roof Opening Panel 2001 Cougar Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 02/8/2001
Roof Opening Panel Motor Removal
  1. Remove the overhead console. For additional information, refer to Section 501-12.
  1. Disconnect the sliding roof motor electrical connector.
    v4101317.jpg
  1. Disconnect the sliding roof panel relay.
    v4101318.jpg
  1. Remove the sliding roof motor control unit.
    v4101322.jpg
Installation
  1. To install, reverse the removal procedure.

Oct 30, 2009 | 2001 Mercury Cougar

Not finding what you are looking for?
2004 BMW 5 Series Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...