Question about 2001 Ford Explorer Sport Trac

1 Answer

Intake bolts torque pound and pattern to torque them ford 2001 sport trac

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Ford Master
  • 531 Answers

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: I need the rear shock torque specs for a 2007 sport trac

Torque Specifications Description Nm lb-ft lb-in Brake caliper bolt 32 24 — Brake disc shield bolt 8 — 71 Fuel tank filler pipe bracket bolt 15 11 — Fuel tank filler pipe hose clamps 3 — 27 Halfshaft nut and washer 275 203 — Lower arm inboard bolt 250 185 — Lower arm outboard bolt 275 203 — Parking brake cable bracket bolt 10 — 89 Shock absorber lower bolt 275 203 — Shock absorber rod nut 65 48 — Shock absorber upper mount nut 30 22 — Stabilizer bar bracket nut 48 35 — Stabilizer bar link nut and grommet 30 22 — Toe link cam adjuster nut 275 203 — Toe link outboard bolt 325 240 — Trailing arm bolt 300 222 — Upper arm outboard bolt 225 166 — Upper arm inboard nut 250 185 — Wheel speed sensor bolt 8 — 71 Wheel knuckle bolt 275 203 —

Posted on Mar 30, 2009

oldfishead
  • 155 Answers

SOURCE: what should i torque the head bolts to on a 2001

for a 3.0 2v....new head

    1. Install the bolts.
    2. Tighten the bolts in five stages in the sequence shown.
    • Stage 1: Tighten to 50 Nm (37 lb-ft).
    • Stage 2: Loosen the bolts one full turn.
    • Stage 3: Tighten to 30 Nm (22 lb-ft).
    • Stage 4: Rotate each bolt 90 degrees.
    • Stage 5: Rotate each bolt an additional 90 degrees.
  • intake bolts are:
    1. Install the intake manifold. Tighten the bolts in the sequence shown in two stages.
    2. Stage 1: Tighten to 15 Nm (11 lb-ft).
    • Stage 2: Tighten to 32 Nm (24 lb-ft).
    • work from the center out
  • Posted on Jul 07, 2009

    wyno62
    • 364 Answers

    SOURCE: 2001 ford sports trac brake lights not working ,

    This may be a simple fix, where the wheel jack or washer bottle is located in the back behind the panel, there should be connectors for the rear lights, it is possible that the plug has been dislodged, remove the panels and check the plug connections. Good luck.

    Posted on Nov 19, 2009

    • 5 Answers

    SOURCE: how to replace fuel filter on 2001 ford sport trac

    Buy a manual and read it. The manual will tell you how to replace...

    Posted on Nov 23, 2009

    • 132 Answers

    SOURCE: 2001 ford explorer sport trac wont start all the function turn on

    check what the diagnosis machine will give if there is no data then check if the starter crank sensor is getting any power

    Posted on Jul 26, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    03 Dodge Intrepid intake manifold torque specs top & bottom is for 3.5 V6


    Lower Intake:
    1. Use a skin coat of RTV silicone on both sides of the water passage ports (outer most holes) and put the new lower intake gaskets into place
    2. Hand tighten the 13mm head intake bolts and Torque the bolts , starting from the center and working your way out in a circular pattern
    3. Torque these bolts in a few small increments until they have reached 250 inch pounds of torque.
    4. Upper Intake Plenum:
    5. When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be torqued to 250 inch pounds .The fuel rail bolts should be torqued to 100 inch pounds

    Jun 24, 2016 | 2003 Dodge Intrepid

    2 Answers

    How much torque should be applied to a chrysler 300 2006 3.5L and torque for the intake manifold?


    Data I have found indicates that a torque of 250 inch pounds is appropriate for these 13mm bolts. Torque them in a circular pattern starting from the center pulling through several times. DO NOT OVERTIGHTEN!

    Nov 26, 2014 | 2006 Chrysler 300

    1 Answer

    Cyl head torque specs focus 1.6 LX 07


    cylinder head and main bearing bolts had a first step torque of 50 to 60 foot-pounds and a second step torque of 80 to 90 foot-pounds each. The rod bearing bolts had a first step torque of 25 to 30 foot-pounds and a second step torque of 30 to 36 foot-pounds. The intake manifold and exhaust had a first step torque of 5 to 7 foot-pounds. The intake manifold had a second step torque of 14 to 21 foot-pounds while the exhaust manifold had a second step torque of 16 to 23 foot-pounds.

    BMW PARTS

    May 25, 2012 | Ford Focus Cars & Trucks

    2 Answers

    2001 daewoo lanos dual overhead 1.6 liter head bolt torque and sequence


    1. Tighten cylinder head bolts to 25 N.m (18 ft. lbs.). Tighten bolts an additional 70 degrees plus 70 degrees plus 30 degrees using angular torque gauge .
    2001-daewoo-lanos-dual-overhead-1-6-vrq3bch1e30nz1jlq5sn5nnt-4-0.gif

    Oct 20, 2011 | 2000 Daewoo Lanos

    1 Answer

    Need to put engine back together on ford 4.0 2002 sport trac need all torque information for all bolts


    absolutly no idea to be honest as i never use a torque wrench but aftert 40+yrs i just sort of feel them but as you cannot do this then buy a haynes manual and look in their as they are not expensive

    Oct 08, 2011 | 2002 Ford Explorer Sport Trac

    1 Answer

    I need to now what to torue the bolts to on the intake manifold for 1998 Ford F150 4.6


    The lower intake bolt get torqued in two steps..Following the correct pattern, first to 18 inch pounds and second pass to 6-8 foot pounds.

    chuckster57_55.gif

    Sep 22, 2011 | Ford F-150 Cars & Trucks

    1 Answer

    I need torque specs on flywheel for a 2002 sport trac 4.0


    Installation
    1. NOTE: Special bolts are used for flywheel installation. Do not use standard bolts.
      Install the flywheel.
      • Tighten the bolts in the sequence shown in two stages.
      • Stage 1: Tighten the bolts to 13 Nm (10 lb-ft).
      • Stage 2: Tighten the bolts to 71 Nm (52 lb-ft).
    please rate, thanks

    May 26, 2011 | 2002 Ford Explorer Sport Trac

    2 Answers

    Are they valve cover torque values and/or pattern in a 2001 chevy cavalier 2.2l


    15 foot pounds... no pattern is given for such a low torque value

    Apr 04, 2010 | 2001 Chevrolet Cavalier

    2 Answers

    Need the cylinder head torque settings on a toyota corolla 1990 model ae92 wiht a 4a-fc engine


    Tighten in several passes to 44 foot pounds.

    I just wanted to add. Since this is an aluminum cylinder head, I hope you loosened the head in the loosening torque pattern. The pattern opposite of the torque tightening pattern. If not, you stand the chance of warping the head.

    Again, since it's an aluminum head, it needs to be checked for flatness. Most aluminum heads need to be surfaced before re-installing.

    Tightening torque pattern is as follows:

    1.The Drivers side of the engine is the Left side.
    From the Front going towards the back; the bolts are numbered 10, 6, 1, 3, and 7.
    From the Front going towards the back on the Passenger side; the bolts are numbered 8, 4, 2, 5, and 9.

    The Exhaust and Intake Camshaft Bearing Cap bolts go to 9 foot pounds. Tighten gradually. One bolt to the other with so many foot pounds, work back, and forth up to 9lbs.

    Camshaft Timing Pulley bolts go to 43 foot pounds. (In a tightening sequence, and gradually)

    Jul 25, 2009 | 1990 Toyota Corolla

    1 Answer

    I need the rear shock torque specs for a 2007 sport trac


    Torque Specifications Description Nm lb-ft lb-in Brake caliper bolt 32 24 — Brake disc shield bolt 8 — 71 Fuel tank filler pipe bracket bolt 15 11 — Fuel tank filler pipe hose clamps 3 — 27 Halfshaft nut and washer 275 203 — Lower arm inboard bolt 250 185 — Lower arm outboard bolt 275 203 — Parking brake cable bracket bolt 10 — 89 Shock absorber lower bolt 275 203 — Shock absorber rod nut 65 48 — Shock absorber upper mount nut 30 22 — Stabilizer bar bracket nut 48 35 — Stabilizer bar link nut and grommet 30 22 — Toe link cam adjuster nut 275 203 — Toe link outboard bolt 325 240 — Trailing arm bolt 300 222 — Upper arm outboard bolt 225 166 — Upper arm inboard nut 250 185 — Wheel speed sensor bolt 8 — 71 Wheel knuckle bolt 275 203 —

    Mar 30, 2009 | 2007 Ford Sport Trac Limited

    Not finding what you are looking for?
    Cars & Trucks Logo

    109 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    fordexpert

    Level 3 Expert

    5501 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...