Question about 1999 Chevrolet Silverado 2500

1 Answer

No brake lights new switch power to all fuses 99 siverado 2500 ???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 372 Answers

Do you have power at the switch and if so when you hit the brake pedal does it go through the switch? If so check for power at the taillight connector, if not you have a wiring problem between switch and rear of vehicle if you have power it most likely require new taillight circut boards in the taillight housings

Posted on Apr 04, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights dont work for 96 chevy siverado


First things to check would be the fuses and bulbs. If both are good check the switch on the brake pedal

Oct 25, 2016 | Chevrolet Silverado Cars & Trucks

1 Answer

No brake lights on siverado 1500


Try looking on the brake pedal arm under the dash, there is usually a switch high up on the arm.

Dec 21, 2013 | 2003 Chevrolet Silverado 1500

1 Answer

No brake lights 99 dodge 3500 4wd


Do you have power leaving brake light switch?

Dec 22, 2012 | Dodge Ram 3500 Cars & Trucks

1 Answer

How do I adjust emerg. brake 2003 siverado 2500 hd


go under the truck on the drivers side, there u will see the single cable from the park brake in the cab go into a "Y", there is a threaded rod there, that has two nuts on it, that is the adjustment.

Jun 13, 2010 | 2003 Chevrolet Silverado 2500

1 Answer

Brake lights not working i changed the bulbs the switch and the fuse


first of all, check to see if you have power to brake switch. if you have power then maybe the switch is bad or needs adjusting. most switches are located on top backside of brake pedal.

Apr 22, 2010 | 1977 Chevrolet Silverado 2500

1 Answer

I have a 99 lumina i have no brake lights and


check for power to brake light switch and comming out, sounds like bad brake light switch

Feb 04, 2010 | 1999 Chevrolet Lumina

1 Answer

I have a 99 siverado 2500, the odometer/gear select only works sometimes.... also the service 4x4 light comes on... 4wd doesnt engage all the time. Any suggestions?


You need to replace the ignition switch in the steering columb,not the key switch but the actual ignition switch[it hs many wires going to it and to the key switch.

Dec 13, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

No brake lights, recently we had issues with the brakes after 1600 bucks trying to fix them they stop just fine but are squishy and feel like there are no brakes. now we also have no brake lights, changed...


Check your brake light switch see if you have power in and out when you press on brake pedal if no power bad switch, if top middle brake light work's, you'll need the turn signal switch, brake light circuit run throw switch .

Dec 11, 2009 | 1995 Chevrolet Silverado 2500

1 Answer

Brake lighs stop working


Does the 3rd brake lamp illuminate? If so then your problem is multifunction switch.If it doesn't do the following checks.
Check for power to and thru the brake lamp switch itself.If you do not have power to the switch check fuse no. 10(20 amp) in the interior fuse panel.If you have power to the switch then depress brake pedal and make sure you have power thru the switch.If this is ok the check Fuse 22(20amp) with brake applied..

Mar 01, 2009 | 1999 Lincoln Town Car

1 Answer

2005 chevy 2500 brake lights wont work


Just to be sure you checked fuses underhood? There is a junction block at rear of truck on frame it can cause lights to not work check it to make sure all conections are tight.also check the trailer hook up for brake light power as this is on a seperate cicuit but is supplied by brake switch.If you have power there it will eliminate switch.your fuse box has a brake fuse and trailer brake fuse

Dec 08, 2008 | 2000 Chevrolet 2500

Not finding what you are looking for?
Cars & Trucks Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...