Question about 1999 Honda CR-V

2 Answers

How can I get my 1999 Honda crv to get sensors ready to smog

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try this: the sensors need cleaned from oil and carbon contamination. You can try to use seafoam from wal mart or autozone. Pull the vacuum line off the brake booster and pour it in the line while the engine is running. Also pour some into fuel tank. Next, drive the vehicle on a 4 lane with the highest speed posted you can find. This should clean them, but sometimes you need to try twice. Only a probe in the exhaust will see if the seafoam worked. Find you a shop that will help you prepare for your test. These steps and seafoam has helped me and has also turned the check engine light off.

Posted on Apr 04, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Honda Master
  • 531 Answers

What do you mean? do you have a check engine light on?

Posted on Apr 04, 2015


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The location of the camshaft censor on a HONDA C.R.V 1999

There is no dedicated cam sensor on these devices. The cam position is sensed by the electronics in the distributor.

Feb 02, 2016 | 1999 Honda CR-V

1 Answer

I have a1999 Honda crv I'm trying to smog. No check engine light on. It won't get monitors/ sensors ready to check levels of poluutants out tail pipe. Any advice on how to clean or get sensors ready

Before I got for an emissions test I do several things. Change the oil and oil filter. Change the air filter. Spray Throttle Body cleaner into the Throttle body where the throttle plate is. Put a high quality injector cleaner into the fuel and run most of it out then refill the gas tank to full. If it still does not pass, I generally change the oxygen sensor. The works for many cars. Last case scenario: run the car until it is good and hot. Put one bottle of rubbing alcohol in a whole tank of gas and try to pass again. If you do not like that idea, Auto Zone sells a can of stuff that costs $11 and is guaranteed to help you pass the emission test.

Apr 08, 2015 | Honda Cars & Trucks

1 Answer

Trying to get my 1997 honda civic smogged. Replaced the knock sensor about 800 miles ago. No check engine light is on. When I try to smog it i have three things not ready - the catalyst, the evap, and...

As a rule it takes about 50 miles for the computer to finish it's readiness tests. Some take longer so I would drive it about 75 miles and then check.

Jul 25, 2011 | 1997 Honda Civic

1 Answer

1999 CRV code #P1336. What is it and how do I fix it

that code is a crankshaft position sensor circuit problem. you'll need a manual to further diagnose this one.

Feb 20, 2011 | 1999 Honda CR-V

1 Answer

I bought a used Honda CRV 1999 in US and shipped it overseas. What should i do first, before start driving a car?

have it register first, get insurance and complete all supporting papers or documents like dead of sales. tax reciept, then your ready to jump on your car..............

Jan 09, 2011 | 1999 Honda CR-V

1 Answer

My honda crv 1999 temperature gets whn i run

This could be caused by a bad or sticking thermostat. this would not allow for the engine collant to circulate through the engine to cool it down. you could even be low or out of engine coolant. have you checked your coolant level?

Mar 30, 2010 | 2001 Honda CR-V

1 Answer

My honda crv 1999 clock broke how to take the clock out .

I have the removal instructions and repair solution at:

Oct 05, 2009 | 2001 Honda CR-V

2 Answers

Radio code for Honda CRV 1999

If the radio has not been changed in the past, then I am almost certain that your local Honda dealaship can help but as always they may charge you. There are auto centres that are equipt to change the radio code and they do charge.

Nov 30, 2008 | 1999 Honda CR-V

1 Answer

CRV Not Idling Correctly

Hook it up to a computer to see what codes pop up. This will tell you whats going going on. possibly its a speed sensor that is on the air intake area. Get a bottle of Lucas Injector cleaner, this helps clean out the injectors and the crud they collect.

Jun 12, 2017 | 1999 Honda CR-V

Not finding what you are looking for?
1999 Honda CR-V Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides