Question about 2005 Chevrolet Avalanche

1 Answer

05 chevy avalanche ; having misfire around 1800-2000 rpm then will bogg down and die. Have replaced crank shaft and cam shaft sensor, as well as fuel pump and filter. No vac. leaks. Im out of ideas!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 10,875 Answers

Coil packs

Posted on Apr 04, 2015

  • Stephanie Ford Johnson
    Stephanie Ford Johnson Apr 04, 2015

    I will give that all a shot! Thanks!

  •  johnny rebel
    johnny rebel Apr 04, 2015

    yw,i have run into the same problem,start the truck at night,open the hood and watch for sparks have someone rev it if need be

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 321 Answers

SOURCE: 99 olds alero 2.4

I'm sure you have installed a fuel pressure gauge and monitored the fuel pressure while the problem is occurring?Another diagnostic tool which is easy to do,is while the problem is occurring,unplug one sensor at a time beginning with the Mass Air Flow first,.if it uses one.Many times,not always,depending on the sensor,if the sensor is taken out of the picture as far as what the PCM is seeing,like unplugging the MAF,the PCM will substitute the missing sensor output with a generic value that will allow the engine to at least run,and if unplugging for example the MAF,the engine idle speed returns to normal,you know you're onto the problem.You didn't mention if the engine ran ok other than the idle problem.As far as checking for vacuum leaks,i use something like brake cleaner or WD 40,more of a liquid,and it does sound like a vacuum leak.Plastic intake manifolds do develop nearly invisible cracks that open up more with heat.Revsisit the possibility.And as for the PCM,it is possible,but more likely a mechanical problem.Lastly,remove an O2 sensor or two before the catalytic convertor,run the engine and see if anything changes.Cheap way to verify the catalytic convertor is flowing and not restricting engine airflow,as i have seen bad cats cause misfire codes and strange problems.Good luck.

Posted on Dec 04, 2008

  • 1 Answer

SOURCE: 2000 chevy blazer, truck cranks

Does your battery go dead?

Posted on Dec 18, 2008

honeymokey
  • 3113 Answers

SOURCE: my engine shuts off while im driving

Check ecm for number 1228253. If it has this one in it you will have a cutting off problem. Gm replaced these with #16198264 The cam sensor magnet on the cam gear will deteriorate and give problems. This will require removal of the timing cover.

Posted on Apr 17, 2009

  • 3 Answers

SOURCE: 1994 Dodge Ram 1500 5.9 (360) won't start new fuel pump, coil??

Maybe check ignition control modual.

Posted on Apr 21, 2009

  • 496 Answers

SOURCE: Stalls while in drive with foot on brake , changed MAP Sensor, Crank Shaft Sensor , Distributor, Fuel Pump, Fuel Filter , have ran out of ideas

I would check the IAC motor or idle air control motor, heres a little info.about the part.Stratus Sedan, 1999-2005 Idle Air Control Motor

Print


Description & Operation

Not for Dodge Stratus Sedan
The idle air control motor (IAC) attaches to the throttle body. It is an electric stepper motor. The PCM adjusts engine idle speed through the idle air control motor to compensate for engine load, coolant temperature or barometric pressure changes. The throttle body has an air bypass passage that provides air for the engine during closed throttle idle. The idle air control motor pintle protrudes into the air bypass passage and regulates airflow through it.
The PCM adjusts engine idle speed by moving the IAC motor pintle in and out of the bypass passage. The adjustments are based on inputs the PCM receives. The inputs are from the throttle position sensor, crankshaft position sensor, coolant temperature sensor, MAP sensor, vehicle speed sensor and various switch operations (brake, park/neutral, air conditioning).

0996b43f8020234f.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig.

Not for Dodge Stratus Sedan
When engine rpm is above idle speed, the IAC is used for the following functions:


Off-idle dashpot Deceleration air flow control A/C compressor load control (also opens the passage slightly before the compressor is engaged so that the engine rpm does not dip down when the compressor engages)
The idle air control motor (IAC) attaches to the throttle body. It is an electric stepper motor. The PCM adjusts engine idle speed through the idle air control motor to compensate for engine load, coolant temperature or barometric pressure changes. The throttle body has an air bypass passage that provides air for the engine during closed throttle idle. The idle air control motor pintle protrudes into the air bypass passage and regulates airflow through it.
The PCM adjusts engine idle speed by moving the IAC motor pintle in and out of the bypass passage. The adjustments are based on inputs the PCM receives. The inputs are from the throttle position sensor, crankshaft position sensor, coolant temperature sensor, MAP sensor, vehicle speed sensor and various switch operations (brake, park/neutral, air conditioning).

21180_cdia_g257.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig.

When engine rpm is above idle speed, the IAC is used for the following functions:


Off-idle dashpot Deceleration air flow control A/C compressor load control (also opens the passage slightly before the compressor is engaged so that the engine rpm does not dip down when the compressor engages)
Target Idle
Target idle is determined by the following inputs:


Gear position ECT Sensor Battery voltage Ambient/Battery Temperature Sensor VSS TPS MAP Sensor
Target idle is determined by the following inputs:


Gear position ECT Sensor Battery voltage Ambient/Battery Temperature Sensor VSS TPS MAP Sensor


Removal & Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the IAC electrical connector.
  3. Remove the IAC mounting screws.
  4. Remove the IAC.

To Install:
  1. Install the IAC to the throttle body.
  2. Tighten mounting screws to 5.1 Nm (45 inch lbs.) torque.
  3. Attach electrical connector to the IAC.
  4. Connect the negative battery cable.

    0996b43f80202350.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig.


  1. Disconnect the negative battery cable.
  2. Disconnect the IAC electrical connector.
  3. Remove the IAC mounting screws.
  4. Remove the IAC.

To Install:
  1. Install the IAC to the throttle body.
  2. Tighten mounting screws to 5.1 Nm (45 inch lbs.) torque.
  3. Attach electrical connector to the IAC.
  4. Connect the negative battery cable.

Posted on May 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How cam shaft sensors on a 1994 Toyota Camry V6


Pull an O2 sensor before the catalytic convert. If it starts, replace the cat.

Dec 13, 2015 | 1994 Toyota Camry

2 Answers

05 kia amanti with diagnostics codes p0350,p0320,p0300,p0302,p0303,p0304,p0305,p0306.skipping at times.when it does skip & misfire the rpm gauge goes crazy.this problem is not consitant


Generic OBD II Diagnostic Trouble Codes

DTC CODES P0300 to P0399

P0300....Random/Multiple Cylinder Misfire Detected

P0301....Cylinder 1 Misfire Detected

P0302....Cylinder 2 Misfire Detected

P0303....Cylinder 3 Misfire Detected

P0304....Cylinder 4 Misfire Detected

P0305....Cylinder 5 Misfire Detected

P0306....Cylinder 6 Misfire Detected

P0307....Cylinder 7 Misfire Detected

P0308....Cylinder 8 Misfire Detected

P0309....Cylinder 9 Misfire Detected

P0310....Cylinder 10....Misfire Detected

P0311....Cylinder 11 Misfire Detected

P0312....Cylinder 12 Misfire Detected

P0313....Misfire Detected with Low Fuel

P0314....Single Cylinder Misfire (Cylinder not Specified)

P0320....Ignition/Distributor Engine Speed Input Circuit

P0321....Ignition/Distributor Engine Speed Input Circuit Range/Performance

P0322....Ignition/Distributor Engine Speed Input Circuit No Signal

P0323....Ignition/Distributor Engine Speed Input Circuit Intermittent

P0324....Knock Control System Error

P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor)

P0326....Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)

P0327....Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

P0328....Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0329....Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0330....Knock Sensor 2 Circuit (Bank 2)

P0331....Knock Sensor 2 Circuit Range/Performance (Bank 2)

P0332....Knock Sensor 2 Circuit Low Input (Bank 2)

P0333....Knock Sensor 2 Circuit High Input (Bank 2)

P0334....Knock Sensor 2 Circuit Input Intermittent (Bank 2)

P0335....Crankshaft Position Sensor A Circuit

P0336....Crankshaft Position Sensor A Circuit Range/Performance

P0337....Crankshaft Position Sensor A Circuit Low Input

P0338....Crankshaft Position Sensor A Circuit High Input

P0339....Crankshaft Position Sensor A Circuit Intermittent

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

P0341 Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor)

P0342....Camshaft Position Sensor 'A' Circuit Low Input (Bank 1 or Single Sensor)

P0343....Camshaft Position Sensor 'A' Circuit High Input (Bank 1 or Single Sensor)

P0344....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or Single Sensor)

P0345....Camshaft Position Sensor 'A' Circuit (Bank 2)

P0346....Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2)

P0347....Camshaft Position Sensor 'A' Circuit Low Input (Bank 2)

P0348....Camshaft Position Sensor 'A' Circuit High Input (Bank 2)

P0349....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 2)

P0350....Ignition Coil Primary/Secondary Circuit

Nov 17, 2010 | Kia Amanti Cars & Trucks

1 Answer

Crank shaft sensor? is this the same as cam shaft


no each one has its own job,
crank sensor is counting crank shaft rpms
cam sensor is counting cam shaft rpms
is there any lights coming on just as this is happening?
i think you should have the fuel pressure checked when it dies out,you need at least 50psi at fuel rail

Dec 08, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Engine died at hwy speed crank/cam sensor faults


o1 cruiser spit and sputter go down rd put cam sensor and crank shaft sensor on wouldnt run at alll with new crank sensor had to put old one on please hel

Sep 29, 2009 | 2004 Chrysler PT Cruiser

2 Answers

My 01 8.1L chevy will start then die. And


I would give a serious search for a major vacuum leak. Check around the intake manifold with an aerosol spay of starting fluid or a pentetrating oil. One of these will cause an affect of engine stumble or increase in engine speed. Check also all vacuum lines especially around the tree and all larger lines. Good luck my friend, Dana

Sep 21, 2009 | 2001 Chevrolet Silverado 2500HD

2 Answers

GMC Sierra 2002 4.3 V6 P1345


intake gasket i had the same problem with my truck

Mar 09, 2009 | 2002 GMC Sierra 1500

3 Answers

1998 dodge caravan crank shaft or cam shaft sensor??


maybe have autozone or equal scan the computer for codes. could be a misfire in the cyl. somewhere. give me a code number and i will try to assist you further.

Nov 09, 2008 | 1998 Dodge Caravan

Not finding what you are looking for?
2005 Chevrolet Avalanche Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...