Question about 2000 Ford F250 Super Duty Crew Cabs
I cant find where the 175 amp mega fuse is located on my 2000 ford f250 5.4L. Pictures would help
Look over by the battery. There is a plastic cover mounted to the firewall. Remove that cover and you will find the 2 main fuses.
Posted on Nov 08, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check fuse first in fuse box if not that then you will probably have to drop the fuel tank and change the fuel sending unit: Note check it first before installing new one because if for some reason thats not it you can just take it back without to much extra effort of having to drop tank again also check the old one by simple hot wiring it.
Posted on Nov 02, 2009
SOURCE: I have changed 5 alternator in one day which where no good...I checked my 175 mega fuse it is ok i check the 30 amp fuse which had a 10amp fuse changed it to a 30 amp fuse but made it worse.. also che
after market alternators DO NOT have the proper circuit to the plug to run the voltage regulator found this the hard way as well
Posted on Jun 22, 2012
Hi there:I suggest to check on the Power Distribution Box, that is located in the engine compartment.The power distribution box contains high-current fuses that protect your vehicle's main electrical systems from overloads. A code P0171 may mean that one or more of the following has happened:
DTC P0171 - System Too Lean (Bank 1)This DTC is very similar to P0174, and in fact your vehicle may show both codes at the same time.
Note: The use of "oiled" air filters may cause the MAF to become dirty if the filter is over-oiled. There is also an issue with some vehicles where the MAF sensors leak the silicone potting material used to protect the circuitry.
Possible solutions, a lot of times, cleaning the MAF sensor and finding/fixing vacuum leaks fix the problem. If you're on a tight budget, start there, but that may not be the fix for certain. So, possible solutions include:
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
A code P0171 may mean that one or more of the following has happened:
Posted on Aug 22, 2012
Tips for a great answer:
Nov 05, 2013 | Ford Cars & Trucks
Sep 03, 2013 | 1997 Ford Expedition
Dec 11, 2011 | 1987 Mercury Cougar
Aug 27, 2011 | Chevrolet TrailBlazer Cars & Trucks
May 30, 2011 | 2003 Ford Expedition
May 09, 2011 | 1999 Lincoln Navigator
Oct 01, 2010 | 2000 Lincoln LS
The high current fuse panel is located in the engine
compartment on the left-hand fender apron
Sep 22, 2010 | 1997 Lincoln Continental
296 people viewed this question
Usually answered in minutes!