Question about 2004 Mazda RX-8

Open Question

What is the proper argement of parts in master cylinder for the clutch on a 2004 Mazda RX-8

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 166 Answers

SOURCE: mazda rx 7 rebuilt kit clutch master cylinder.

crack the bleeder nipple on the slave cyl and get some one to slowly push the pedal see if any fluid shoots out if not you may have killed the new seal in the master cyl.
it sounds like you did every thing right its just that old cylinders get were in them and if you don't hone them out and put a new sleeve in them quite often you will rip the new seal apart on the first pump of the pedal.
any way check for presser and let me no

Posted on Dec 21, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bleed the clutch on a 2007 Mazda RX8


on the master cylinder unscrew it den let the break fluid leak out then u tighten then pump the clutch till it is hard then you unscrew it again the break fluid will run out again then tighten then you pump the clutch till it reaches where you want it

Apr 12, 2017 | 2007 Mazda RX-8

1 Answer

Is there both a brake slave cylinder and a clutch slave cylinder on a 2004 Mazada RX 8?


Nope. only a clutch slave cylinder, the brakes have a master cylinder and then they have brake calipers at each wheel

Aug 06, 2013 | Cars & Trucks

2 Answers

How do I bleed a clutch for a 1985 mazda rx-7


Your clutch slave cylinder could be bad and leaking,here's a picture of it,it's bolted to the side of transmission,has a bleeder screw on it for bleeding.Normally,your fluid shouldn't be low,here's how to replace.

Jan 30, 2013 | 1985 Mazda RX-7

1 Answer

WHERE IS LOCATION OF SLAVE CYLINDER ON 2004 RX8


Normally the slave cylinder is mounted on the bell housing or just inside where the clutch arm is located.

Jan 25, 2013 | 2004 Mazda RX-8

1 Answer

2004 rx8 clutch won't disengage..you can shift it with the motor off but it will not shift with the engine running,.. I replaced the master cyclinder already


If you lost resistance from the pedal, you may need to replace the clutch slave. The clutch slave is the one at the end of the clutch line attached at the transmission. Check also for leaks on your system.

Sep 04, 2011 | 2004 Mazda RX-8

3 Answers

Hi my name is daniel, i have an 04 mazda rx8 with manual trans and the problem with my car is that when the car is ON the gears wont shift and when the car is OFF the gears do shift, what can the problem...


Manual transmission?

If so there is a problem with the clutch. If its hydraulic the slave or master cylinder may be leaking and the reservoir is probably empty. If its a cable it may be out of adjustment or broken.

Jan 12, 2011 | 2004 Mazda RX-8

1 Answer

Is the clutch ajustable on a 1991 mazda rx 7


if it has a master cylinder for the clutch and a slave cylinder it is not adjustable if it mechanel yes

Feb 25, 2010 | 1991 Mazda RX-7

1 Answer

Slave cylinder replacment for an 04 mazda rx8


u need to have the dealer fix this, u will need special tools to replace the slave and master cylinder of the clutch

Aug 09, 2009 | 2004 Mazda RX-8

2 Answers

I have a 2004 mazda rx-8 6 speed manual transmission...i am having a real hard time shifting into gears...sometime it won't even bulge into gear, and that's when i have to use excessive forces just to put...


You need to check the clutch hydraulics i.e. the clutch master cylinder and the slave cylinder for their function, even if its cable operated try to adjust it so as it opens the clutch fork a little more to allow the clutch plate to be free,thus easy selection of gears.
If this fails thn you will have to replace the pro-kit i.e. clutch plate, pressure plate and release bearing.
Hope this helps!

Jun 14, 2009 | 2005 Mazda RX-8

1 Answer

Mazda rx 7 rebuilt kit clutch master cylinder.


crack the bleeder nipple on the slave cyl and get some one to slowly push the pedal see if any fluid shoots out if not you may have killed the new seal in the master cyl.
it sounds like you did every thing right its just that old cylinders get were in them and if you don't hone them out and put a new sleeve in them quite often you will rip the new seal apart on the first pump of the pedal.
any way check for presser and let me no

Oct 03, 2008 | 1983 Mazda RX-7

Not finding what you are looking for?
2004 Mazda RX-8 Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...