Question about 1995 Oldsmobile Cutlass Ciera SL

1 Answer

How do I remove the steering wheel on a 1995 Oldsmobile cutlass ciera sl 3.1l to tighten the steering column

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,585 Answers

You don't need to.There isn't any thing behind the wheel that you can tighten. A sloppy steering column has to be removed to replace any parts making it sloppy. You best bet is to call around local junk yards or maybe Ebay and find a replacement column. Your not going to find the parts you need to fix it.

Posted on Apr 03, 2015

  • Jason Salgado
    Jason Salgado Apr 03, 2015

    I brought in my car for a vehicle state inspection and the mechanic said it failed because of a loose steering column. I also searched on some website forums stating that there are a few bolts that come loose on these model vehicles that can be retightened and fitted with loc-tite.

  • Randy Ohler Apr 03, 2015

    Is the wheel loose or the column. The column has 2 to 4 bolts under the dash. The steering wheel is different. It has a bushing that can be replaced, if the wheel has slop up and down, and left to right. If you have tilt wheel, then it is most like y the universal in the column that is bad. It is part of the shaft and is only bought with the shaft. You won't find either of those parts. Hope yours is just the bolts. Look under the dash, you will see the bolts that hold the column.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What makes the fuel pump not kick on on a 92 Oldsmobile Cutlass

There is a red wire close to the battery in the front. It's not connected to anything. Apply positive voltage and that will run your pump for testing purposes.

Dec 08, 2015 | Oldsmobile Cars & Trucks

1 Answer

Help with1995 Oldsmobile Cutlass Ciera SL Code reader scan tool

You need to buy an OBD1 Code Reader
1996 started OBD2 Systems

Jul 06, 2013 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Where is the flasher relay?

For 1995 Oldsmobile Cutlass Ciera 3.1L SFI OHV 6cyl. the Flasher is located:
* Hazard flasher: Front seating area, driver side, under dash, passenger side of steering column, mounted in fuse block

* Turn signal: Front seating area, driver side, under dash, passenger side of steering column, mounted behind instrument panel

Hope this helps (remember to rate this answer).

Feb 22, 2011 | 1995 Oldsmobile Cutlass Ciera

1 Answer

On a 1993 oldsmobile cutlass supreme sl, were would the turn single flasher be l- ocated at?

according to Front seating area, driver side, under dash, mounted on passenger side of steering column

Sep 07, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

I have a wobble in the left front wheel of my 1995 Olds Ciera SL wagon. What could this be?

Have the rim and the tire checked out, also while there checking the tire have them check your front wheel bearing's, if it just started doing it, check tire for hump on it.

May 26, 2010 | 1995 Oldsmobile Cutlass Ciera

1 Answer

How do you change a turn signal switch in a 1993 Oldsmobile Cutlass Ciera S V6 with tilt wheel and cruise control?

You have to remove the steering wheel and the plate that is behind it with two screwdrivers. unplug the wire hareness to that. you will also have to remove the screws that hold you hazzard light button on and remove the bottom of the steering column. Tie a string or wire to the harness so you can pull that back thru the column whn you have to reattach the new one.

Dec 15, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Where is the flasher located on a 1995 cutlass ciera

I have one of these cars and love it. I bought my wife a Buick Century. The closest thing available and now the Ciera is my work car. It has been awhile. Remove the bottom of the dash left of the steering column. The flasher is just to the left of the column. Three screws, easy!

Jun 06, 2009 | 1995 Oldsmobile Cutlass Ciera

1 Answer

1995 Oldsmobile Cutlass Ciera turn signal problem

the sswitch is in the steering wheel you must remove the steering wheel being carful to disconnect the airbags in the proper procedure so it wont go off and, the switch will be behind there it is part of the multifunction switch.

Feb 28, 2009 | 1995 Oldsmobile Cutlass Ciera

2 Answers

I need to locate and replace the multi function switch

My turn signal flasher was located to the right of the ash tray, I looked around the column for HOURS and it wasn't there... I also have an 93 oldsmobile cutlass ciera, it drove me crazy because the manual wasn't correct.

Feb 27, 2009 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1995 Oldsmobile Cutlass Ciera SL Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides