Question about 1996 Cadillac DeVille
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
u have to remove the panel that has the door handle in it, remove the panel which has the window and the seat adjusters, unplug the wires and just lift the door panel and there u are.
Posted on Oct 16, 2008
SOURCE: door panel removal
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.
Posted on Dec 07, 2009
Testimonial: "Thanks for your assistance. Great information"
Tips for a great answer:
Feb 24, 2015 | 2004 Cadillac Deville
Dec 25, 2014 | 2003 Cadillac Deville
Sep 27, 2014 | Cars & Trucks
Oct 29, 2011 | 1996 Cadillac DeVille
Oct 13, 2011 | 1996 Cadillac DeVille
Apr 06, 2011 | 1995 Cadillac DeVille
Apr 28, 2010 | 1993 Cadillac DeVille
Feb 13, 2010 | 1998 Cadillac DeVille
Feb 01, 2010 | 2001 Cadillac DeVille
Apr 04, 2009 | 2001 Cadillac DeVille
33 people viewed this question
Usually answered in minutes!