Question about 2005 GMC Yukon XL
Most modern fuel filters are located with the fuel pump inside the gas tank.
Posted on Apr 03, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you
Posted on Mar 16, 2009
Remove bulb, make sure it sits tight in the socket. make sure socket is not burnt up (brown or black in color) Check bulb, if the filament inside is loose or discolored, replace as nesessary. Check brake light switch under driver side dash above brake pedal. make sure it is adjusted correctly.
Posted on Jul 23, 2009
First - Safety is always the key to working with fuel:
1) Remove from the area of work anything that could ignite the fuel, 'High intensity shop lights, no smoking'
2) Work with a flash light or directional battery operated light if its dark.
Two tools to have in my opinion -
2) Needle nose
1st - use the pliers to spin/break the hose end loose over the In and out flang of the fuel filter.
2nd - If you have a needle nose pliers which have a very narrow nose end.
Place the nose end all the way at the hose end that's over the fuel filter's intake/output flange.
You then can leverage the hose off by forcing the body of the needle nose up against the body of the filter.
Just like a teeter totter where the body of the filter becomes the /\ fulcrum of the teeter totter.
Hope this makes sense?
A/V Media Guy
Posted on Nov 21, 2009
The location is on the driver side frame rail on the inside a few feet from the fuel tank forward. You need remove the negative terminal from the battery then open the gas cap to relieve the pressure then loosen the filter ie.open end wench or crecent wrench discard filter make sure the flow indicator is going the correct way away from tank. Tighten new filter connect, battery terminal, prime fuel lines by switching the key forward a few times then start. Good Luck
Posted on Nov 02, 2010
Testimonial: "Thanks Ryan I will give it a try!"
Tips for a great answer:
May 16, 2017 | Cars & Trucks
Feb 15, 2017 | 2004 GMC Yukon XL
Jul 08, 2014 | 2002 GMC Yukon XL
Mar 26, 2012 | 2005 GMC Yukon Xl Denali
May 23, 2011 | 2005 GMC Yukon Xl Denali
Mar 24, 2017 | 2003 GMC Yukon XL
Aug 07, 2009 | 2001 GMC Yukon XL
Jul 06, 2009 | 2001 GMC Yukon XL
Aug 28, 2013 | 2005 GMC Yukon XL
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: