Question about 2002 Pontiac Grand Prix GT

Open Question

I have to replace a lateral link on a 2002 grand prix gt I don't know what size socket or wrench to take off the bolts

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2002 Pontiac Grandam, Rear Brake Pad Change

my 99 takes a 15mm to swing down the caliper and a 13mm to remove the housing

Posted on Nov 18, 2008

junkman1249
  • 552 Answers

SOURCE: Flare nut wrench size?

try metric size. a flare wrench is an closed end wrench with a little **** in big enough to to slide over the line and then around the bolt its grabs mor of the bolt than a regular wrench

Posted on Dec 13, 2008

davidg65
  • 26 Answers

SOURCE: 2002 Pontiac Grand Prix Thermostat

as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!

Posted on Jan 31, 2009

  • 1 Answer

SOURCE: '98 grand prix GTP belt tensioner replacement

I didnt have to remove my alternator, I just used a 15 mm wrench to remove the left-hand threaded bolt holding the tensioner on. hope this helps

Posted on Jul 21, 2009

66 chrgr
  • 1011 Answers

SOURCE: NEED TO KNOW THE SIZE SOCKET I WILL NEED FOR THE

Size 36mm.socket for the axle nut and a 18mm wrench for the caliper bolts!

Posted on Jun 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 grand caravan starter diagram and size bolts needed for the starter


To work on your vehicles, you need a basic set of wrenches and sockets, standard and metric sizes. To buy one wrench or one socket, just isn't feasible, in my opinion.
Try 15 mm

Dec 09, 2016 | 2006 Dodge Grand Caravan

1 Answer

How do I tell if my seat belt is attached by a tube nut or a bolt? Air bags are currently disengaged because I need to replace the female portion of the driver buckle!


Most are secured to the vehicle using a TORX bolt screwed into the body. There may be a cover on the assembly that has to be removed to see this bolt. I believe the TORX socket size is T-55.

Jul 01, 2015 | Pontiac Cars & Trucks

1 Answer

Front axle nuts size for 2003 pontiac grand prix


2002 Grand Prix front axel nut holding on hub is a 33MM or 1 5/16 deep socket

Feb 08, 2012 | 2003 Pontiac Grand Prix

1 Answer

What size socket do I use to remove the brake caliper on a 2004 grand prix?


the caliper to slide bolt can be a 13, 14 or 15mm. The caliper bracket to knuckle bolt is usually a 15mm but can also be an 18mm

Feb 03, 2012 | 2004 Pontiac Grand Prix

1 Answer

How do I loosen the idler wheel in order to change the drive belt on a 2002 Pontiac Grand Prix V6 3800.


just use the size wrench that fits on the pully to relieve tension on the belt and remove belt while takeing the tension off repeat to put new on that way you dont have to remove anything

Nov 24, 2010 | 2002 Pontiac Grand Prix

2 Answers

How to replace the serpentine belt


if you're not mechanically inclined then don't attempt it , but if you are then get a 3/8 long handled ratchet or breaker bar and locate your belt tensioner simply push the ratchet or breaker bar into the square opening in the tensioner and pull toward front of car or push towards back of car and you will fell it give you shouldn't have to push hard once this is done make sure you have a firm grip and pull belt off top pulley which ever is closer and easier to access then follow diagram on front above radiator or on strut tower

Jul 27, 2010 | 2002 Pontiac Grand Prix

1 Answer

Where can i order frame bolts for a 1999 Grand Prix GT


Easiest place to find any hardware cheap is at a scrapyard. You can also use hardware store bolts if you buy grade 8, not standard bolts. Otherwise you can order them at any dealership.

Mar 12, 2010 | 2002 Pontiac Grand Prix

1 Answer

I am changing disc brake pads on 2002 Jeep Grand Cherokee. Where are the bolts holding the caliper and what size socket is needed?


They may not be bolts, might be the allen wrench type, on the back side of the calipars, one on top and one on the bottom. Not sure what size.

Mar 11, 2010 | 2002 Jeep Grand Cherokee

1 Answer

'98 grand prix GTP belt tensioner replacement


I didnt have to remove my alternator, I just used a 15 mm wrench to remove the left-hand threaded bolt holding the tensioner on. hope this helps

Jul 14, 2009 | 1998 Pontiac Grand Prix

2 Answers

2002 Pontiac Grand Prix Thermostat


as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!

Dec 10, 2008 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2002 Pontiac Grand Prix GT Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...