Question about Cars & Trucks

Open Question

Need torque specs for assembly bolts - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 25 Answers

SOURCE: 87 samurai bolt torque specs for engine

The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.

The factory service manual is the only way to go.

Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)

Intake & exhuast manifolds- 13.5 - 20 lbs

Flywheel - 41.5 - 47 lbs

Clutch cover - 13.5 - 20 lbs

Posted on Mar 17, 2009

chuck943
  • 783 Answers

SOURCE: Head bolt torque specs needed for 96 tbird 3.8

Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:

  1. 20 Nm (15 lb-ft).
  1. 40 Nm (30 lb-ft).
  1. 50 Nm (37 lb-ft)
Loosen retaining bolts one at a time two to three revolutions and retighten as follows:

Long bolts:
  • Tighten to 40-50 Nm (30-37 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Short Bolts:
  • Tighten to 20-30 Nm (15-22 lb-ft).
  • Rotate an additional 175-185 degrees.
  • Go to next bolt in sequence.
Here is a pic of the sequence
http://i253.photobucket.com/albums/hh43/chuck943/Headboltsequence38L.gif

Posted on Mar 19, 2009

outdoorsman5
  • 631 Answers

SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC

I have the specs and diagrams. If you want me to send them to you, give me your email address. Outdoorsman592003@yahoo.com

Posted on Sep 05, 2009

  • 333 Answers

SOURCE: Replacing front wheel hub assembly on 2006

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

Posted on Sep 10, 2009

Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"

inspectmycar
  • 233 Answers

SOURCE: 94 mazda B3000 3.0L cylinder head torque specs

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 accord lx v6. I'm changing the automatic belt tensioner assembly. I need the torque specs for the lower and center bolts for the tensioner assembly. Thanks Eddie


i cant find information on alldata they give me all the info to replace tencioner but no torque specs i give a list 40 nm

Oct 24, 2014 | Cars & Trucks

1 Answer

Need torque specs for front wheel bearing on 2004 dodge 3500 dually


The hub bearing retaining bolts are 150 ft. lbs the center axle nut primary torque 135 ft.lbs rotate 5-10 times increasing torque by 50 ft.lbs until final torque of 265 ft.lbs is reached

Mar 23, 2014 | 2004 Dodge Ram 3500 Truck

1 Answer

Kia torque specs


HI , I need engine assembly torque specs bor big end,main bearings, flywheel, cilinderhead bolts, rocker shaft bolts for kia sepkia 1.5 8valve engine

Jan 13, 2014 | Cars & Trucks

1 Answer

Hi. I am assembling a avanza 1.3 that blew head gasket. What are the torque settings for head bolt


I don't have the specs.Evenly go around to all of the head bolts and gradually torque them. 20,40 60 foot pounds.
Depending on the type of gasket you used,you may have to re-torque the bolts after it has gone through one heat cycle.

Mar 08, 2013 | 2007 Toyota Avanza 1.3

2 Answers

Oil around the spark plugs


Check to make sure the plugs are tight and torqued to manufacturer's specs. Also, your Valve cover gasket(s) may need replaced.

May 21, 2012 | 1990 Honda Accord

1 Answer

Front hub retaining bolts torque specs for 1997 k-2500hd


Hello, here is the front hub torque specs.

Hub and Bearing Assembly to Steering Knuckle Bolts (K Models)
180 N·m
133 lb ft

Aug 20, 2011 | Chevrolet 2500 Cars & Trucks

1 Answer

Need torque spec on back 3 bolts of hub assembly on 2003 silverado 5.3 v8.


I belive that your talking about the bolts that sucure the hub to the knuckle . 50 TO 60 FT LBS is good its not a super critial spec unless for some other reason they are comeing loose witch wouldn't have anything to do with the torque spec anyway . Torque is determined by the diamater and tread pitch as well the grade of the bolt so a grade 8 bolt is much harder and stronger then a grade 2 bolt and the thread pitch is lower on harder bolts so they have more threads per inch . You can also tell by looking at the head of the bolt the more lines you see the harder the steel the bolt is made out of is So like i said its not super crictial and if there lock washers make sure you but them back ware they came from

Jul 14, 2011 | 2003 Chevrolet Silverado 1500

2 Answers

Torque specs


the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs

Apr 26, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

Specs for a 1997 Ford Ka 1297 cc


If the vehicle is fitted with a Rocam engine, the valve clearance is not adjustable, hydraulic lifters.
The camshaft caps are torqued in two stages, first 10Nm and than 90 degrees

Apr 10, 2009 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...