At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your 2004 Infiniti G35 is still overheating after replacing the thermostat and cooling sensor, there may be a few other issues that could be causing the problem:
Radiator blockage: The radiator may be blocked or clogged, preventing the coolant from flowing through it properly. This can cause the engine to overheat. To check for a blockage, visually inspect the radiator for any obstructions or debris, and flush the radiator to clear out any buildup.
Water pump failure: The water pump circulates the coolant through the engine and radiator. If the water pump fails, the coolant will not circulate properly, and the engine can overheat. Check the water pump for any signs of damage or wear, and replace it if necessary.
Fan clutch or electric fan failure: The fan clutch or electric fan is responsible for cooling the radiator when the car is idling or driving slowly. If the fan clutch or electric fan fails, the engine can overheat when the car is not moving. Check the fan clutch or electric fan for any signs of damage or wear, and replace it if necessary.
Head gasket failure: If the head gasket is blown, coolant can leak into the engine cylinders, causing overheating and other problems. Check the head gasket for any signs of damage or wear, and replace it if necessary.
As for the no heat issue, it's possible that the overheating has caused damage to the heater core or other components. It's also possible that there is air trapped in the cooling system, preventing the coolant from flowing properly through the heater core. Bleeding the cooling system may resolve the issue.
If your 1998 Cutlass is overheating and the heater is blowing out cold air, and you are also noticing that coolant is leaking out, there are a few possible causes. Here are some things to check:
Check for a coolant leak: Start by checking the engine and radiator for any visible signs of a coolant leak. It's possible that a hose or other part of the cooling system may be damaged or loose, causing coolant to leak out.
Check the radiator: If the radiator is not working properly, it can cause the engine to overheat. Check to make sure the radiator is not clogged or damaged.
Check the water pump: The water pump circulates the coolant through the engine. If it's not working properly, coolant may not be flowing through the system correctly, causing the engine to overheat.
Check the cooling fan: The cooling fan helps to keep the engine cool by pulling air through the radiator. If it's not working properly, the engine may overheat.
Check the thermostat: Even though you recently replaced the thermostat, it's possible that it's not working correctly. A faulty thermostat can cause the engine to overheat.
It's important to address any issues with the cooling system as soon as possible, as overheating can cause serious damage to the engine. If you are not comfortable diagnosing and repairing the issue yourself, it's recommended to take your car to a qualified mechanic.
From what you have described, which is a rapid over heating of the radiator coolant fluid and therefore a hot engine condition, it would appear that the thermostat in the engine's cooling system is faulty.
If the thermostat is sticking in the closed or nearly closed position temporarily, there will be no flow or very little coolant flow between the engine and the radiator and the engine will overheat.
You have advised that after the engine is shut off , and radiator coolant fluid has cooled, you re-start the engine and drive the car without the overheating condition occurring again and the radiator coolant temperature is normal. This time there is no overheating because the thermostat is working normally.
You should have the thermostat replaced as soon as possible because allowing the engine to overheat can cause very expensive engine damage.
If you had a continuing overheating condition then I would suspect both the thermostat and the water pump. However as the overheating seems to be only temporary, and clears itself after you have shut down the engine and re-started it 10 minutes later (without further overheating arising) then I think you only have a faulty thermostat.
Please also check that the electric fans which draw air through the radiator are operating. These run on a temperature sensor and will switch on automatically once the radiator coolant fluid reaches a certain temperature and then switch off again when the fluid temperature reduces. You will hear them running once they start up. If these fans are not working the radiator coolant can quickly overheat in various driving and temperature conditions because there will be insufficient air flow through the radiator to cool the fluid. If the temperature sensor is faulty or has died, or if the electric motors running the fans are faulty, the fans will not operate.
Are the cooling fans running when engine overheats?If no find out why.If yes ,is the upper radiator hose HOT when overheating,if not replace thermostat.If fan works,thermostat open and not low on coolant last possibility is a blown cylinder head gasket.
The fans are actuated by coolant temp in the radiator. It is possible to have overheated coolant in the radiator, causing the steam, and your engine not overheating...the temp sensor for your engine is reflecting the engine temp, not the temp of the coolant in the radiator. You problem could be a bad temp sensor at the radiator...not allowing the fans to come on. Good Luck! I hope you find this to be very helpful!
I dont think the transmission has anything to do with your overheating problem...Check to see if there is water in the oil...If there is water in the oil then it could have a head gasket problem..Did you ever replace the thermostat? If it is stuck then it would also cause overheating...Excessive exhaust backpressure because of a clogged catalytic converter could also cause overheating..Also check belt tension and condition. A loose belt that slips may prevent the water pump from circulating coolant fast enough and/or the fan from turning fast for proper cooling...Another thing it could be is a faulty Water pump -- Any wobble in the pump shaft or seepage would call for replacement. In some instances, a pump can cause an engine to overheat if the impeller vanes are badly eroded due to corrosion or if the impeller has come loose from the shaft. The wrong pump may also cause an engine to overheat. Some engines with serpentine drive belts require a special water pump that turns in the opposite direction of those used on the same engine with ordinary V-belts... Also check the Fan -- With mechanical fans, most overheating problems are caused by a faulty fan clutch, though a missing fan shroud can reduce the fan's cooling effectiveness by as much as 50% (depending on the fan's distance from the radiator) which may be enough to cause the engine to overheat in hot weather or when working hard.
The thermostat is behind the upper radiator hose...remove the upper radiator hose and loosen and then remove the two bolts on the outlet (where the upper radiator hose ends) The thermostat is inside that outlet...Another thing to check is if there is water in the oil...If there is water in the oil then it could have a head gasket problem..Did you ever replace the thermostat? If it is stuck then it would also cause overheating...Excessive exhaust backpressure because of a clogged catalytic converter could also cause overheating..Also check belt tension and condition. A loose belt that slips may prevent the water pump from circulating coolant fast enough and/or the fan from turning fast for proper cooling...Another thing it could be is a faulty Water pump -- Any wobble in the pump shaft or seepage would call for replacement. In some instances, a pump can cause an engine to overheat if the impeller vanes are badly eroded due to corrosion or if the impeller has come loose from the shaft. The wrong pump may also cause an engine to overheat. Some engines with serpentine drive belts require a special water pump that turns in the opposite direction of those used on the same engine with ordinary V-belts... Also check the Fan -- With mechanical fans, most overheating problems are caused by a faulty fan clutch, though a missing fan shroud can reduce the fan's cooling effectiveness by as much as 50% (depending on the fan's distance from the radiator) which may be enough to cause the engine to overheat in hot weather or when working hard.
I had the same overheating problem in my jeep ! My problem was finaly found out to be the clutch in my fan its a different kind of clutch system it work as this. When your jeep gets warmer the tighter your fan clutch gets .While cool your fan moves slowly. now to test your clutch just warm up your jeep and rev it up a bit if your fan dose not pick up speed then it is sliping.What will come out of this is that you fan will the seez and run full all the time. if you jeep dose not overheat wile moving then it is not your thermo stat period.
×