Question about Nissan Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Dipstick is to the left of the engine. Should be a small yellow dipstick. Add fluid through the dipstick hole. The vehicle should be running when you do this. It is best to have driven at least 20 miles before adding trans fluid so everything has had time to get hot.
Posted on Feb 11, 2009
I own a 1994 BMW 540i with an automatic transmission. The filler hole/plug is located under the transmission oil pan. Picture in your mind an inverted cone with a hex plug inside the top of the cone. You will need to remove the plug and pump fluid into the pan until it overflows. Also, this must be done with the engine running and the transmission in neutral.
Do not try this unless to you have the proper equipment to raise your car, keep it level, and have four jackstands in addition to the special fluid and pump.
Posted on Oct 15, 2009
there will be a plug at the bottom of the transmission. pull the plug, let it drain, and replace the plug. Refill with the recommended amount of fluid out of the owners manual. Run the vehicle through the gears a few times with the car started. let it idle till the temp. comes up, then check the trans fluid level and add till full
Posted on Jan 29, 2010
Tips for a great answer:
Apr 05, 2017 | 1997 Nissan Quest
Dec 01, 2015 | Nissan Cars & Trucks
Aug 07, 2015 | 2004 Nissan Armada
Dec 08, 2014 | 1996 Nissan Sentra
Feb 03, 2014 | 2001 Nissan Altima
Dec 25, 2013 | Nissan Vanette Cars & Trucks
May 02, 2010 | 1995 Nissan Maxima
Jun 20, 2009 | 2004 Nissan Altima
May 24, 2009 | 1995 Nissan Pathfinder
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: