At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
It is held on with nuts... just get under it and look... its not hard..or complicated...just do not remove the last two nuts or the bumper will fall when you least expect it to..(SAFETY).. it WILL cut you bad if it falls on you.. get a friend or remove carefully...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are some steps that help you to easily remove Front Bumper :
1. Open the hood of your car.
2 . Look under the edge of the front of the car at the end of the bumper.
Pull the plastic shield down out of the way if it doesn't come off completely. Reach behind the bumper at each corner and you should find a bolt holding the corner of the bumper to the car. Remove these bolts. The bumper should come off.
For more details, click here at https://www.drivenbystyle.com/body-kits-aerodynamics/front-bumpers
open the hood-remove the retainers across the top of the bumper/grille-in the wheel wells remove the retainers that go into the bumper-pull the fender liners back and remove retainer inside that goes through the bumper into the fender-next remove the retainers across the bottom of the bumper cover-you should be able to pull it off-watch out for wires hooked to fog lights etc.-cheers denny
Its fitted by screws and held by assembly.Give proper support to lower side and loosen the screws and bumper should easily come off. ---------------For complete step by step details,go through the help links mentioned below :-----
How to Attach the front bumper cover to the fender on 2010 Ford
Explorer?
Open the hood . Looking at the headlight assembly.Directly behind it there are 2 clips in the frame. you will have to pull these up and out. Then the assembly will pull out from the from to access the sockets and bulbs. the sockets turn to get them out. sometimes the is another clip that will hold the assembly in. just pull on the assembly and it will pop loose.
The procedure is very involved.It requires the removal of the front bumper fascia fasteners from the center and side of the
headlamp to be removed.
Remove the front bumper fascia fasteners from the center
and side of the headlamp to be removed, full removal of the fascia is
not necessary. Refer to Front Bumper Fascia Replacement.
Gently pull the fascia forward to allow clearance to remove the headlamp assembly.
You will also need to remove some of the fasteners at the front of the inner wheel well.
The Front Bumper Fascia is the plastic cover over your front bumper.
You may also have to remove the plastic cover that is located under the front of the hood over the radiator.It extends to both sides.
×