Question about Cars & Trucks

2 Answers

My car always shows low engine performance when i buy fuel. What may cause the problem

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

Good advise also go to Oreilly or pep boys,and they . will scan your car for free ....I like free.... and point you in right direction for correct diagnosis.

Posted on Apr 03, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 693 Answers

This could be something as simple as a dirty air filter or a more serious problem with sensors, etc.

Your best bet here would be to have your mechanic download the fault codes to point you in the right direction.

-Steve

Posted on Apr 03, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 Kia Optima. Fuel gauge shows 1/16th of a tank and the low fuel light is not on. Engine shut down. Out of gas. Add gas. Car starts up. What would cause the gauge to misread in this way?


most fuel gauge readings are not that accurate anyway so its out of fuel but not what the is guage reading. but the fuel level sensor in the tank may be at fault sound like its the prob but the instument pack should put the low fuel light on if its fitted on your vehicle spec but not always fitted even though the warning light is present hope this helps

Dec 04, 2016 | Kia Cars & Trucks

1 Answer

My Isuzu axiom 2001 model always show reduced power and the throttle will race up please,tell me the problems I have. I changed plugs? and throttle mouth(huh), still the same problems is there.


ever get a full tune up this decade? yes/no.
no , then what are you waiting for, some guy to charge you for new engine with only bad spark plugs>? or fuel filter? or air filter?
which engine, be the first in 100s to say.
most dont and expect helpers to be like god, clairvoyant.
or super man with 12,000 mile xray eyes, really?

2004 has 6ve1 V6 but not in a 2001.!
2004 last isuzu car here. became rebadged cars. GM
but the 2001 i think is a Rodeo, so says the wiki!

If the gas foot causes engine RPM to raise super high over 3000 rpm and not attendant car speed increase(mph)this is called transmission slip. is it slipping , no? then its a weak engine
easy no ?
we dont have these parts in USA>????? change pluck and tortle mouth if fact , perplexing to read....

weak engines> facts. all.
reduced power has any causes, over 50, so will not cause you to go broke with my silly wild guessing as seen here. every day.

the engine power can drop from 3 reasons.
besides a bad engine, 25 reasons there.
in physics they are, (a good engine with full compression tests ok)
  1. lack of fuel (low fuel pressure)
  2. too much fuel, flooding misfire.
  3. and huge list of causes of misfires
  4. lost power misfiring is violent and engine shakes. (bad spark?)
  5. lost power feels only like dragging weight we call bogging.
  6. and is usually fuel pressure loss. or weak injections.
  7. bad sensor to the PCM , scan the PCM and win.
  8. lots more, but no thesis today, just a short list.
so you have 2 choices
get it fixed
or buy the tools and DIY ,
fish or cut bait... we say.

my guess get it fixed, the tools can cost.
$20 each
and if need to buy them all $100 (buy them as needed an win)
and a $100 scan tool.
or barrow one, buy one or ask any shop in town, hey mista,
can yous, scan me car for free?

now my wild useless guess
get a tuneup.

Apr 10, 2016 | Isuzu Axiom Cars & Trucks

2 Answers

Hi, I have been here before and felt I got good resonse...basically agreeing with everything I was doing to fix the repeated Engine light coming on. So here we go for further diagnosis... RECAP: All the...


Check for damaged or leaking fuel lines, also check fuel pump fitted correctly & pipe work not kinked causing low fuel flow, or it could be faulty fuel pressure regulator You may just be unlucky & it may be a faulty fuel pump,just because its new doesn't mean it can't be faulty

Mar 22, 2013 | 1999 Ford Taurus

1 Answer

What would be wrong with my truck, i was driving one day and it dyed..i tryed to start it again and it woulkd run and drive but only let me go 20k, could it be my fuel filter????or what could it be????


Vehicles: Any vehicle unable to achieve highway speeds.

I agree with your assessment - the fuel system is almost always the culprit when a vehicle cannot exceed a given speed.

Priority Checks: fuel pump function has gone marginal, fuel filter clogged, in-tank fuel strainer clogged, fuel pressure regulator failure, fuel rail leaking, fuel injector electrical harness/connectors loose, faulty fuel injector(s)

Secondary causes: CKP (crankshaft position sensor), CMP (camshaft position sensor), ECC (Engine Control Computer)

Tertiary Checks: Oxygen sensor(s), catalytic converter plugged

Faulty sensor(s) or ECC would cause immediate performance problems/speed limitations due to engine mis-timing. Whereas fuel system problems would limit the vehicle's performance by limiting the fuel available to the engine.
A plugged catalytic converter (or other exhaust system constriction) would limit engine performance by restricting the ability of the engine to properly exhaust.

Dec 06, 2011 | 1995 Ford Bronco

1 Answer

Trying to locate the fuel filter or fuel reset button


Theirs no fuel filter except to one on the fuel pump inside the tank/\. theirs no reset button but a cade in the computer indicating a ASD reply problem may cause the pump not to run. Turn the key on and off three times and leave it on the last time and the check engine light will flash out the codes and some models the odometer read out may display the codes and some tell the discriptions of the codes too.. Codes are to be corrected from low number to higher number first as some of the lower numbers can cause the higher numbers. Fuel pumps are well known to fail on these cars and those that are run nearly emplty and only a little gas is added at each fuel stop so the car is always being run low on fuel have more troble with fuel pumps than those that are filled up and are kept nearly full in hot weather. Computer reset has to be performed with a scanner. The older models could be reset by disconnecting the battery but that ended in 1989.

Jul 27, 2011 | 2001 Dodge Caravan

1 Answer

Engine shut off willnot crank after heating up geting code 34


DTC - 34 MAP Sensor Circuit Error (Signal Low Indicating High Vacuum)

The ECM uses the Manifold Absolute Pressure (MAP) sensor as an indication of engine load. High voltage would indicate low engine vacuum and higher engine load. Low voltage would indicate high engine vacuum and lower engine load. The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

Fault Code Description:
* 34 - MAP sensor circuit error (signal low indicating high vacuum)

Symptoms:
* Poor engine performance
* Engine running lean (not enough fuel, hard starting, lack of power)

Common Problems:
* GM MAP sensors do not commonly fail
* Due to erratic engine vacuum, other engine performance problems can cause a code 34 to set


Good luck (remember to rate this answer).

Mar 20, 2011 | Buick Riviera Cars & Trucks

1 Answer

SES light on code P0171, 2005 Xterra, what to do??


P0171 is a lean oxygen sensor code for bank 1 on your engine.
It indicates that there is a lean condition (engine not getting enough
fuel or getting too much air) on that side of your engine.
Bank 1 is always the side of the engine where #1 cylinder is
located. In your case it is front-most cylinder on the right side
of the engine. (As viewed from the driver's seat)
So bank one is the passenger side.

If there are any other engine control codes, you need to fix those
first, as they may be the cause of the lean condition.

If that is the only code you are getting, then diagnostic testing
needs to be performed to determine the actual cause of the problem.

Possible causes are:

* Intake air / vacuum leaks
* Faulty / dirty fuel injector(s)
* Incorrect fuel pressure (Likely to cause both P0171 and P0174 at the same time)
* Low fuel volume (Pressure OK) (restricted fuel filter,etc.)
* Fauly Mass Airflow Sensor
* incorrect PCV hose connection
* Exhaust gas leaks
* Faulty Air Fuel Ratio Sensor

Dec 01, 2010 | 2005 Nissan Xterra

1 Answer

1996 Honda Accord Rough Idle Even After tune up performed Changed spark plugs, distributor cap and rotor wheel along with all spark plug wires, changed fuel filter, air filter, spent $150 on fuel injector...


Perform a valve clearance inspection and adjust if necessary. Tight or sticking valves will cause a misfire or rough running concern. Note: Perform valve adjustment when the engine is stone cold. 4cyl: INT 0.26mm EXH: 0.30mm (V6 engine are hydraulic and no adjust necessary.) Also check for a sticking or stuck open EGR valve. For diagnostic purposes only: Remove the EGR valve. Place a business card over the EGR passage and bolt the EGR valve back on. This plugs the EGR ports and if the misfire goes away the EGR valve is partially stuck open and is defective.
Check for low fuel pressure. Check for low compression. Check cam timing. Check for a weak ignition coil. Also don't over look the possibility of worn or broken engine mounts which cause excessive engine movement and engine vibration. -hope this helps

Mar 02, 2010 | 1996 Honda Accord

2 Answers

I have my check engine light on my 2003 Ford F150 supercrew truck, with 141000 mil, engine is the v8 4.9L my temp gauge pegs out to the hot when i drive a bit and the engine light comes on i am told its a...


here are all poss causes of check engine light.
Generic Trouble Codes

P0001-P0099 – Fuel and Air Metering and Auxiliary Emission Controls

Code Description
P0001 Fuel Volume Regulator Control Circuit/Open
P0002 Fuel Volume Regulator Control Circuit Range/Performance
P0003 Fuel Volume Regulator Control Circuit Low
P0004 Fuel Volume Regulator Control Circuit High
P0005 Fuel Shutoff Valve Control Circuit/Open
P0006 Fuel Shutoff Valve Control Circuit Low
P0007 Fuel Shutoff Valve Control Circuit High
P0008 Engine Position System Performance (Bank 1)
P0009 Engine Position System Performance (Bank 2)
P0010 A Camshaft Position Actuator Circuit (Bank 1)
P0011 A Camshaft Position - Timing Over - Advanced or System Performance (Bank 1)
P0012 A Camshaft Position - Timing Over - Retarded (Bank 1)
P0013 B Camshaft Position - Actuator Circuit (Bank 1)
P0014 B Camshaft Position - Timing Over - Advanced or System Performance (Bank 1)
P0015 B Camshaft Position - Timing Over - Retarded (Bank 1)
P0016 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)
P0018 Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A)
P0019 Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B)
P0020 A Camshaft Position Actuator Circuit (Bank 2)
P0021 A Camshaft Position - Timing Over - Advanced or System Performance (Bank 2)
P0022 A Camshaft Position - Timing Over-Retarded (Bank 2)
P0023 B Camshaft Position - Actuator Circuit (Bank 2)
P0024 B Camshaft Position - Timing Over - Advanced or System Performance (Bank 2)
P0025 B Camshaft Position - Timing Over - Retarded (Bank 2)
P0026 Intake Valve Control Solenoid Circuit Range/Performance (Bank 1)
P0027 Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 1)
P0028 Intake Valve Control Solenoid Circuit Range/Performance (Bank 2)
P0029 Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 2)
P0030 HO2S Heater Control Circuit (Bank 1 Sensor 1)
P0031 HO2S Heater Control Circuit Low (Bank 1 Sensor 1)
P0032 HO2S Heater Control Circuit High (Bank 1 Sensor 1)
P0033 Turbo Charger Bypass Valve Control Circuit
P0034 Turbo Charger Bypass Valve Control Circuit Low
P0035 Turbo Charger Bypass Valve Control Circuit High
P0036 HO2S Heater Control Circuit (Bank 1 Sensor 2)
P0037 HO2S Heater Control Circuit Low (Bank 1 Sensor 2)
P0038 HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0039 Turbo/Super Charger Bypass Valve Control Circuit Range/Performance
P0040 O2 Sensor Signals Swapped Bank 1 Sensor 1/ Bank 2 Sensor 1
P0041 O2 Sensor Signals Swapped Bank 1 Sensor 2/ Bank 2 Sensor 2
P0042 HO2S Heater Control Circuit (Bank 1 Sensor 3)
P0043 HO2S Heater Control Circuit Low (Bank 1 Sensor 3)
P0044 HO2S Heater Control Circuit High (Bank 1 Sensor 3)
P0045 Turbo/Super Charger Boost Control Solenoid Circuit/Open
P0046 Turbo/Super Charger Boost Control Solenoid Circuit Range/Performance
P0047 Turbo/Super Charger Boost Control Solenoid Circuit Low
P0048 Turbo/Super Charger Boost Control Solenoid Circuit High
P0049 Turbo/Super Charger Turbine Overspeed
P0050 HO2S Heater Control Circuit (Bank 2 Sensor 1)
P0051 HO2S Heater Control Circuit Low (Bank 2 Sensor 1)
P0052 HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0053 HO2S Heater Resistance (Bank 1 Sensor 1)
P0054 HO2S Heater Resistance (Bank 1 Sensor 2)
P0055 HO2S Heater Resistance (Bank 1 Sensor 3)
P0056 HO2S Heater Control Circuit (Bank 2 Sensor 2)
P0057 HO2S Heater Control Circuit Low (Bank 2 Sensor 2)
P0058 HO2S Heater Control Circuit High (Bank 2 Sensor 2)
P0059 HO2S Heater Resistance (Bank 2 Sensor 1)
P0060 HO2S Heater Resistance (Bank 2 Sensor 2)
P0061 HO2S Heater Resistance (Bank 2 Sensor 3)
P0062 HO2S Heater Control Circuit (Bank 2 Sensor 3)
P0063 HO2S Heater Control Circuit Low (Bank 2 Sensor 3)
P0064 HO2S Heater Control Circuit High (Bank 2 Sensor 3)
P0065 Air Assisted Injector Control Range/Performance
P0066 Air Assisted Injector Control Circuit or Circuit Low
P0067 Air Assisted Injector Control Circuit High
P0068 MAP/MAF - Throttle Position Correlation
P0069 Manifold Absolute Pressure - Barometric Pressure Correlation
P0070 Ambient Air Temperature Sensor Circuit
P0071 Ambient Air Temperature Sensor Range/Performance
P0072 Ambient Air Temperature Sensor Circuit Low
P0073 Ambient Air Temperature Sensor Circuit High
P0074 Ambient Air Temperature Sensor Circuit Intermittent
P0075 Intake Valve Control Solenoid Circuit (Bank 1)
P0076 Intake Valve Control Solenoid Circuit Low (Bank 1)
P0077 Intake Valve Control Solenoid Circuit High (Bank 1)
P0078 Exhaust Valve Control Solenoid Circuit (Bank 1)
P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0081 Intake Valve Control Solenoid Circuit (Bank 2)
P0082 Intake Valve Control Solenoid Circuit Low (Bank 2)
P0083 Intake Valve Control Solenoid Circuit High (Bank 2)
P0084 Exhaust Valve Control Solenoid Circuit (Bank 2)
P0085 Exhaust Valve Control Solenoid Circuit Low (Bank 2)
P0086 Exhaust Valve Control Solenoid Circuit High (Bank 2)
P0087 Fuel Rail/System Pressure - Too Low
P0088 Fuel Rail/System Pressure - Too High
P0089 Fuel Pressure Regulator 1 Performance
P0090 Fuel Pressure Regulator 1 Control Circuit
P0091 Fuel Pressure Regulator 1 Control Circuit Low
P0092 Fuel Pressure Regulator 1 Control Circuit High
P0093 Fuel System Leak Detected - Large Leak
P0094 Fuel System Leak Detected - Small Leak
P0095 Intake Air Temperature Sensor 2 Circuit
P0096 Intake Air Temperature Sensor 2 Circuit Range/Performance
P0097 Intake Air Temperature Sensor 2 Circuit Low
P0098 Intake Air Temperature Sensor 2 Circuit High
P0099 Intake Air Temperature Sensor 2 Circuit Intermittent/Erratic

Dec 01, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Error codes, oil pressure sensor and engine control moduale


Hello, It should actually be an oil sending unit, and is located on the back of the intake manifold to the left of the distributor. *The P0523 is Oil Pressure Sending Unit Voltage too high *P1693 Generic fault indicating a fault in the bus or PCM/ECM interface *P1682 - I can't find this code Anyways, I will post here all the error codes for future reference. Dodge Cummins Check Engine Error Codes Cycle Key on-off-on-off-on to read codes in odometer display P0002 ECM fuel calibration error P0016 Crankshaft/Camshaft Timing Misalignment/Out-of- Sync P0071 Ambient Temperature Sensor Performance / Rationality P0072 Ambient Temperature Sensor Low P0073 Ambient Temperature Sensor High P0088 Fuel Rail Pressure Too High P0106 Manifold Absolute Pressure Sensor Performance / Rationality P0107 Manifold Absolute Pressure Sensor Low P0108 Manifold Absolute Pressure Sensor High P0111 Intake Air / Charge Temperature Sensor Performance / Rationality P0112 Intake Air / Charge Temperature Sensor Low P0113 Intake Air / Charge Temperature Sensor High P0116 Engine Coolant Temperature Sensor Performance / Rationality P0117 Engine Coolant Temperature Sensor Low P0118 Engine Coolant Temperature Sensor High P0121 Accelerator Position Sensor (APPS) Signal Voltage Too Low P0122 Accelerator Position Sensor (APPS) LowAPPS Voltage Input Too Low P0123 Accelerator Position Sensor (APPS) Signal Voltage Too High P0128 Cooling System Error / Thermostat Rationality P0148 Fuel Delivery Error P0168 Fuel Temp Too High P0169 Water-in-Fuel Detected For Too Long P0192 Fuel Rail Pressure Sensor Low P0193 Fuel Rail Pressure Sensor High P0201 Fuel Injector 1 Circuit P0202 Fuel Injector 2 Circuit P0203 Fuel Injector 3 Circuit P0204 Fuel Injector 4 Circuit P0205 Fuel Injector 5 Circuit P0206 Fuel Injector 6 Circuit P0216 Fuel Injection pump Timing Malfunciton [new injector pump time] P0217 Coolant Temperature Too High P0219 Engine Overspeed P0230 Transfer pump circuit out of range P0234 Turbocharger Overboost Condition P0235 Turbocharger Boost Sensor A Circuit P0236 Turbocharger Boost Pressure Sensor Performance / Rationality P0237 Turbocharger Boost Pressure Sensor Low P0238 Turbocharger Boost Pressure Sensor High P0251 Fuel Injection Pump Mechanical Failure Fuel Valve Feedback Circuit P0252 Injection Pump Fuel Metering Control "A" Range/Performance P0253 Fuel Injection Pump Fuel Valve Open Circuit P0254 Fuel Injection Pump Fuel Valve Current Too High P0300 Multiple Cylinder Misfire P0301 Cylinder 1 Misfire P0302 Cylinder 2 Misfire P0303 Cylinder 3 Misfire P0304 Cylinder 4 Misfire P0305 Cylinder 5 Misfire P0306 Cylinder 6 Misfire P0335 Crankshaft Position Sensor Circuit P0336 Crankshaft Position Sensor Performance P0337 Crankshaft Position Sensor Circuit Low P0338 Crankshaft Position Sensor Circuit High P0340 Camshaft Position Sensor Circuit P0341 Camshaft Position Sensor Performance / Rationality P0370 Timing Reference High Resolution Signal "A" P0380 Intake Air Heater #1 Control circuit P0381 Wait-to-Start Lamp Inoperative P0382 Intake Air Heater #2 Control circuit P0460 Fuel Level Sensor A Circuit P0461 Fuel Level Sensor 1 Performance / Rationality P0462 Fuel Level Sensor 1 Low P0463 Fuel Level Sensor 1 High P0477 Exhaust Pressure Control Relay Low P0478 Exhaust Pressure Control Relay High P0480 Cooling Fan 1 Control Circuit/Open (Low Speed Fan Relay) P0483 Cooling Fan Speed P0500 Vehicle Speed Sensor 1 Circuit, or No Vehicle Speed Reference Signal 1 P0514 Battery Temperature Sensor Performance / Rationality P0516 Battery Temperature Sensor Low P0517 Battery Temperature Sensor High P0521 Oil Pressure Sensor Performance / Rationality P0522 Engine Oil Pressure Sensor/Switch Circuit Low Input P0523 Oil Pressure Sending Unit Voltage too high P0524 Oil Pressure Too Low P0532 A/C Pressure Sensor Low P0533 A/C Pressure Sensor High P0541 Intake Air Heater Relay 1 Low P0542 Intake Air Heater Relay 1 High P0562 Battery Voltage Low P0563 Battery Voltage High P0572 Brake Switch 1 Low P0573 Brake Switch 1 High P0576 Cruise Control Input Circuit Low P0580 Speed Control Multiplexed Switch 1 Low P0581 Speed Control Multiplexed Switch 1 High P0602 Control Module Programming Error/NotProgrammed P0604 Internal Control Module RAM Integrity Failure P0606 Internal ECM Processor P0607 ECU Internal Performance P0622 Generator Field Control Circuit P0628 Fuel Pump Relay Circuit Low, or Fuel Lift Pump Control Circuit Low P0629 Fuel Pump Relay Circuit High, or Fuel Lift Pump Control Circuit High P0630 VIN Not Programmed in PCM P0633 SKIM Key Not Programmed in PCM P0642 Sensor Reference Voltage 1 Circuit Low P0643 Sensor Reference Voltage 1 Circuit High P0646 A/C Clutch Relay Circuit Low P0647 A/C Clutch Relay Circuit High P0652 Sensor Reference Voltage 2 Circuit Low P0653 Sensor Reference Voltage 2 Circuit High P0698 Sensor Reference Voltage 3 Circuit Low P0699 Sensor Reference Voltage 3 Circuit High P0700 Transmission Control System (MIL Request) P0743 Torque Converter Clutch Circuit Electrical P0753 Shift Solenoid "A" Electrical P0837 Four Wheel Drive (4WD) Switch Performance / Rationality P0838 Four Wheel Drive (4WD) Switch Circuit Low P0839 Four Wheel Drive (4WD) Switch Circuit High P1488 Auxiliary 5 volt supply output is too low P1492 Ambient/batt temp sensor volts too high P1493 Ambient/batt temp sensor volts too low P1596 Speed Control Switch always high P1597 Speed Control Switch always low P1652 J1850 Communication Bus P1687 No Cluster BUS Message or No Messages from the Mechanical Instrument Cluster P1688 Internal Fuel Injection Pump Controller Failure P1689 No Communication Between ECM & Injection Pump Module P1690 Fuel injection pump CKP Sensor Does Not Agree With ECM CKP Sensor P1691 Fuel Injection Pump Controller Calibration Failure P1693 Generic fault indicating a fault in the bus or PCM/ECM interface P1757 Governor pressure is above 3 PSI when 0 PSI is requested P1762 Governor Press Sensor Offset Volts Too Low or Too High P1765 Transmission 12 volt supply relay control circuit P2121 Pedal Position Sensor 1 Performance / Rationality P2122 Pedal Position Sensor 1 Low P2123 Pedal Position Sensor 1 High P2127 Pedal Validation Switch 2 Low P2128 Pedal Validation Switch 2 High P2146 Fuel Injector Group 1 Supply Voltage Circuit P2149 Fuel Injector Group 2 Supply Voltage Circuit P2266 Water in Fuel Sensor Circuit Low P2269 Water in Fuel Condition P2502 Charging System Output Voltage P2503 Charging System Output Low P2504 Charging System Output High P2509 ECM/PCM Power Input Signal Intermittent P2607 Intake Air Heater Relay 2 Low P2608 Intake Air Heater Relay 2 High P2609 Intake Air Heater System Performance Hope this will help you. Cheers! Ryan

Jun 11, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75235 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...