Question about Cars & Trucks

Open Question

BOth my ABS and ESP warning lights come on as soon as I release my brakes after putting into D or N.

The ABS and ESP warning lights never come on when the car is in Park and idling.If I depress the brakes just enough for the park brake to be released then slowly release the brake pedal ,the warning lights remain off even if a start moving but come on as soon as I depress the brakes somewhat rapidly.Switching the car on or leaving it in idling never bring them on. Help

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tripletauto
  • 1450 Answers

SOURCE: On my 2003 Chevy Suburban, the emergency brake won't release.

there is a cable running from handle to brake assembly it is probably broke there is a release lever under there on brake about a one inch lever hold down on brake and move this and let up on pedal.

Posted on Nov 20, 2008

  • 1 Answer

SOURCE: abs brake warning light comes on and rear brakes remain stuck on

I would bypass abs contraption with new line.(87 dually) abs located under drivers side cab looks very susceptible and is known to fail.I would trust my foot before that old thing.Im rippin it out of my truck & replacing it with new line all the way back.Old lines rusted pretty bad.Better safe than sorry.unplug light bulb or just leave it in .Jersey cant say anything if its 94 or older at inspection.that goes for all the lights.For me,older is better.I dont know what setup you have or if you sold it, you could try replacing it for about 160 at advanced.I hope its not the computer screwin up,thats probably a dealer item.Try unpluging hydraulic unit for shits & giggles.Go over rear brakes again before you start cutting.

Posted on Dec 26, 2008

  • 14036 Answers

SOURCE: 2003 Sonoma SLS 6 cylinder 4.3L ABS issue

I WOULD NOT KEEP DRIVING IT.WHEN ABS LIGHTS AND BRAKE LIGHTS COME ON.YOU HAVE BRAKE FAILURE. TOW IT TO DEALERSHIP HAVE IT SERVICE.AND CHECK THE ABS BRAKES SYSTEM .BECAUSE ABS BRAKE SYSTEM IS NOT A HOME FIX.BECAUSE THE ABS HYDRAULIC MODULATOR UNIT HAS LOWER FROM HOME POSITION .IN ORDER TO MOVE THE MASTER CYLINDER FROM UNIT.YOU NEED A TECH 2 SCANNER TO DO THE JOB.TO GET ABS BRAKES TO BLEED RIGHT BEST TO GET THEM PRESSURE BLEED INSTEAD OF MANUAL BLEEDING GET LESS AIR IN SYSTEM.THAT WHY SEE DEALER SHIP HAS THE THINGS TO DO THE JOB.

Posted on Jun 06, 2009

  • 1 Answer

SOURCE: ASL on cannot get into gear, and brake light are out

To get the car out of park you have to put the shifter right in between neutral and drive and as soon as the car starts put it in drive. Keep your foot on the brake obviously. You can go to Reversve once you get the car started and in DRive.

Posted on Jul 20, 2009

  • 819 Answers

SOURCE: Depress Brake Pedal light

it will come on when the car is in park. normal condition. as soon as you hit the pedal, the light goes out, indicating you can shift from park.

Posted on Dec 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ABS + ESP lights staying on dashboard


wow no year car, now that is a challenge , no?
abs is first.
first- first are brakes.
abs stuck on key on and running full time right?
so check brakes for damage or worn out.
brake fluid level not falling? look yet? look when checking oil every time.
abs can not work on cars with bad brakes, (its not god like)
then check for ABS sensor damage and its wires. under car.
then scan the ABS. got errors, sure you do.
but what? you didnt scan it first.
or read the manual> RTM?
its only 4 bucks to read it.

posted over 200 times, this.
https://suzukipitstopplus.com/Category/3-suzuki-service-manuals.aspx

answer year and read.

Mar 14, 2016 | Suzuki Grand Vitara Cars & Trucks

1 Answer

I have a 2000 Mercedes E430 base sedan. Last week I replaced the brake light switch because it was out and it solved the problem to the point that I can now put my car into gear and drive it, however, as...


Brake light switch problem may cause the ESP / BAS lights to illuminate.

Common symptoms of a bad
Mercedes brake light switch.
  • Car stuck in Park.
  • ABS ESP ETS lights come on.
  • Can not move the shifter from Park to Drive.
  • Brakes Defective Warning on Instrument Cluster
  • Car won't shift gears. Stuck in 2nd gear, limp mode.
  • Brake lights don't work. (Brake light switch can still be defective even if the brake lights work. Checking the brake light operation is not a good test.)
  • ESP, BAS, ABS lights turn on. Car won't shift properly. Stuck in gear.


TEST: To test your new brake light switch: Turn you car off to reset the ABS light. apply the parking brake. and start the car in neutral or park without using the brake. if the problem is the brake light switch... the light will only come on when you press the brake pedal.

If you replaced the brake light switch and the light is still on you should check a few other things such as:

  • Fuses and Relays
  • ABS pump
  • ABS wheel speed sensor
  • Brake Fluid Level
  • Get an advanced scanner to read trouble codes.


NOTE: ** You may need a MBZ scan tool to reset the error code which was stored in the ECU because of the bad brake light switch.

Feb 25, 2015 | 2000 Mercedes-Benz E-Class

1 Answer

Esp and abs warning lights on


check if it needs brake job.

Nov 06, 2013 | 2010 Kia Rio 1.4

1 Answer

Abs, esp, brake and traction light on


Oh I have exactly the same problem right now!! Machanics are saying the back LH speed sensor is faulty however when they checked the computer there were no error codes. The braking issue has stopped but warning lights have been on constantly for three weeks now :( Its due to go back to the machanic in a few days so they can have another look.... What ended up being the problem with yours?

Jun 19, 2012 | 2008 Dodge Nitro

1 Answer

Yellow warning indicator lamp of a tringle with an excalmation point in the center and a counterclockwise arrow arround the triangle ---what does it mean?


Check & replace if necessary the brake pedal switch placed above pedals on the support.
If the problem still occurs you might access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS ECU & reset it.
tdisline_516.jpg
The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.
I'm convinced that your brake pedal switch is faulty because the glow plug warning sign went ON after ESP warning light. Just replace the brake pedal switch, see if rear stop lamps light when press the brake pedal, and test the car on the road.
Good Luck!

Sep 06, 2011 | 2005 Audi A4

1 Answer

The esp light went on first and then the glow plug warning sign on my 2005 TDi passat. said workshop assistance, what is the problem


Check & replace if necessary the brake pedal switch placed above pedals on the support.
If the problem still occurs you might access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS ECU & reset it.
tdisline_516.jpg
The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.
I'm convinced that your brake pedal switch is faulty because the glow plug warning sign went ON after ESP warning light. Just replace the brake pedal switch, see if rear stop lamps light when press the brake pedal, and test the car on the road.
Good Luck!

May 11, 2011 | 2003 Volkswagen Passat

1 Answer

I have a 2004 A6 2.7T S-line (automatic). My ESP


The coolant temp sensor basicly tells the computer whe it's can move into the go mode. WWatch to see if there is a corresponding between the engine temp and the go mode. Good Luck, _Ned_

Oct 01, 2009 | 2003 Audi A6

1 Answer

Fit new indicator stalk to VW passat esp , abs light on now


the stalk should have no interference with the abs or esp set up what i would look at doing is checking your abs sensors they can go all of a flash...goodluck

Jun 19, 2009 | 2004 Volkswagen Passat

4 Answers

ABS, ESP, Level warning lights (2004 Allroad TDI)


I had the brake light switch replaced by a local dealer. Cost was $140 and it fixed the problem. Have driven the car for two weeks since and no lights and all systems normal.

May 22, 2008 | 2004 Audi allroad

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...