Question about 2009 Hyundai i30 cw

1 Answer

Remove internal door lining drivers side to get to internal power window winder

Need to get into winder as something has come loose how do i remove the internal skin on drivers side door?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 1,326 Answers

Usually two or three screws along bottom edge one behind all handles. Remove screws carefully pry panel loose away from door using caution not to damage the clips holding panel on might need a tool for this. I removed enough not to need tool. Have to pry all the way around panel, lift panel up off door by sliding it towards top of door. Disconnected all wire connections, to disconnect handle remove clip panel is off

Posted on Apr 03, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove door panel to get window runner


The panel is usually a pop button type retainers holding the panel on, Obviously all screws will have to be removed ie; grab handle, internal door opening lever, and the window winder,
TIP remove window winder handle with a shoe lace or a lenght of thin material , it's a horseshoe shaped spring clip holding the winder handle on and pulling the shoe lace or material in the opposite direction of clip will easily remove clip (don't loose ) Good luck

Apr 10, 2010 | 2003 Nissan Se R

1 Answer

How do I remove the window winder mechanism on the drivers side door? The window is stuck partly open and I can't seem to move it. Peter


The fault is with the regulator on the window. Remove winder and door handles. Remove door lining and reconnect window to winder rail. Reverse for reassembly

Mar 17, 2010 | 1999 Daewoo Nubira

1 Answer

How do I remove driver side door panel from 2003 ford exployer XLT


It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel (if applicable ) etc . The majority panel are a pop snap on type . Remove the winder lever withthe aid of a shoe lace or thin piece of cloth material, The winder is retained by a horse-shoe shaped spring clip. .... Pull the shoe-lace/ material in the opposite direction of the winder retainer clip and it will easily come off, but it is a spring clip and may fly off so be careful. Good luck

Jan 26, 2010 | 2003 Ford Explorer

1 Answer

How do I remove the drivers doo panel to get to


It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel (if applicable ) etc . The majority panel are a pop snap on type . Remove the winder lever withthe aid of a shoe lace or thin piece of cloth material, The winder is retained by a horse-shoe shaped spring clip. .... Pull the shoe-lace/ material in the opposite direction of the winder retainer clip and it will easily come off, but it is a spring clip and may fly off so be careful. Good luck

Jan 19, 2010 | 1997 Ford Explorer AWD

1 Answer

How do i remove the fender panel to tighten the driver's side door hinge on a 1994 Ford F250? when I open the door the door drops down a bit, so I assume they're just loose and it's not an issue with the...


It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel (if applicable ) etc . The majority panel are a pop snap on type . Remove the winder lever withthe aid of a shoe lace or thin piece of cloth material, The winder is retained by a horse-shoe shaped spring clip. .... Pull the shoe-lace/ material in the opposite direction of the winder retainer clip and it will easily come off, but it is a spring clip and may fly off so be careful. Good luck

Oct 19, 2009 | 1994 Ford F250 Supercab

1 Answer

Drivers door will open from inside but not outside.


there is a clip on the back side of the window winder handle it is in the shape of a c you need to take a pair of neddle nose plires and pull the clip out and the handle will come off

Mar 27, 2009 | 2000 Hyundai Accent

1 Answer

I need to remove the drivers internal door panel


Remove plastic studs from door closer. Unscrew three retaining screws. remove grab.
Unhook window winder retaining clip. Best done with small long-nose pliers. window winder retaining clip located inside plastic winder handle section. Will need to prise away winder handle from door slightly to expose clip. locate and gently pull clip from winder shaft.
unscrew door opener / lock assembly retaining screw.
gently prise lower trim retaining press studs from door. remove lower trim.
gently , from rear of door, pull upper trim from door and similtaniously prise upper trim press studs from door.
gently giggle door opener / lock assembly through upper trim . remove trim
gently with flat blade, peel off plastic dust sheeting.
access to inside off door is now possible.
Reassembly reverse of above

Cheers !

ozzy11

Feb 04, 2009 | 2001 Suzuki Swift

2 Answers

Window wont wind up on ford fiesta


in the door handle you will see some plastic caps
remove these you will then find some phillips screwsremove them the handle will com off
same with the window winder handle
then check for other screws then pull door card off. but gently bottem out & top up

Jan 03, 2009 | 1994 Geo Prizm

1 Answer

Replace Driver's side mirror - Jeep Liberty 2002


The door panel has plastic clips that hold it in place also. Put a thin blade screwdriver between the panel and door. Pry the panel away from the door. The panel will make a loud snapping noise, that is the clip coming out of the retaining hole. Sometimes the clips break.

Dec 09, 2008 | 2002 Jeep Liberty

1 Answer

Need to remove the door panel on my 2001 Subaru Outback -


remove arm rest screws,under plug,remove window winder by getting to clip that attaches it to the mechanism(you can see it if you look hard)pull on the door trim carefully and it should "pop"off the door,its held with plastic pins in the door trim that willstay in the door trim,that should do it

Nov 17, 2008 | 1994 Subaru Legacy Outdoor

Not finding what you are looking for?
2009 Hyundai i30 cw Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...