Question about 2007 Chrysler Aspen 4x2

Open Question

Why did my side mirrors on my aspin stop working but will move by itself sometimes

Can not control it with the controllers but sometime it will just start moving by itself

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: controls not working on driver door

i was told that your issue was solved by changing the relays

Posted on Jan 22, 2009

  • 135 Answers

SOURCE: Cruise control doesn't work

usually that would mean your losing your vacuum pressure. you need to look at you vac hoses for holes keep in mind it can be a hole as small as .4mm so if the hose looks dryrotted then suggest replacement

Posted on May 18, 2009

  • 1392 Answers

SOURCE: AC stops working, Works when I hit the control panel

Sounds like you have a short somewhere, or a module going bad. IF you hit the unit, and it starts working, it is most likely a bad control module.

Posted on Aug 09, 2009

  • 291 Answers

SOURCE: 1991 chrysler lebaron won't start sometimes unless

very good suggestion by mr. greezy.. if that does not resolve.. tilting the steering coloum may just be a coincidence.. the fact that you do hear a click sound at the starter tells me you have the crank signal voltage reaching the starter relay... now that the relay is pulling in, you could have bad contacts in relay or loose power connections...or simply bad starter.. saying this because if the relay (selenoid) is working properly then voltage is getting to the actual starter, but the brushes are probably worn..main thing to do is check all connections.. i mean at the starter and also where the main ground wire hooks t engine.. get back if need more info

Posted on Dec 16, 2009

  • 543 Answers

SOURCE: i have a broken control

The CV joint being broken isn't really the issue, the control arm however is. the CV joint connects the transmission to the wheel, but the control arm on the other hand will be an issue because it keeps the wheel from turning out from under the car. you may have some wheel control issues when trying to drive it. and it is STRONGLY ill advised to do so. your best bet is to make the repair where the vehicle is or tow it to a garage.

Posted on Jun 02, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can i fix my controller to work my side mirrors on my A class mercedes 140 automatic

Hi there. Have you tried checking the fuses or the connection between the two mirrors.
Sometimes the fuse will blow causing the problem.
Also wires could have become corded due to rust

Sep 28, 2016 | Cars & Trucks

1 Answer

Why would my climate control fan quit operating?

It may be a fuse, you would have to check your fuse box. I would check the fan itself. Whether an old fan or a new fan , ware does occur sometimes fast sometime it takes years. Check fan buy moving fan shaft up and down ,side to side. if it moves fan bushings are bad. Sometimes you can repair if your capable, but most times you just replace the fan. GOOD LUCK FRIEND.

Sep 15, 2014 | Cars & Trucks

1 Answer

The driver side door control is not function, driver window won't come down and not able to adjust both side mirrors.

sounds like you have lost power to driver side control box sometimes the electrical connector comes loose or fuse may be blown for power windows, mirrors.

Aug 09, 2014 | Cars & Trucks

1 Answer

I received an answer for my sts..window/mirrors

Had a similar problem with my 2008 Volvo S40 and traced the problem to the window switch circuit board. I replaced this and problem was solved.

Apr 24, 2014 | 2005 Cadillac STS

1 Answer

Driver window/mirror controls not working correctly

sounds like a worn switch have it changed and yuo'll be less frustrated trying to get the mirror etc how u want it

Apr 22, 2014 | 2005 Cadillac STS

1 Answer

2007 passenger folding mirror will not work

{: ) Have someone control the power fold buttons, while you check closely the passenger mirror. If you can feel or hear even a faint hum of the motor while commanded, try giving it a little help, but don't force it if you think it doesn't have enough power to extend or retract itself. The motor could be really stuck or inoperative.
Sometimes when the mirror has been accidentally or manually folded, it needs to be reset by just pressing on the fold buttons a few rounds and let the mirrors fold by itself. Like an exercise.
If you hear the humming noise whenever the fold buttons are pressed, we can assume that the circuit on that side is ok since it is responding electrically, and that a jammed or stuck mechanism is preventing it to move.
If you don't feel or hear any humming, as in totally no sign of response, then there will be additional considerations before deciding to go for a replacement mirror. You will need to confirm if the fault is on the wirings, a door module, or the mirror motor itself. A scan tool test may be recommended for effective diagnosis.
The power fold mirror can be serviced as an assembly. So, goodluck.

Aug 30, 2011 | 2005 GMC Yukon

1 Answer

1987 jeep cherokee both electric mirrors do not move getting no juice at switch Wire traced red /white where is the power source for mirrors in fuse box

yes it should be under electric mirror but you have to check the coonection from control to the mirror sometimes if there is any loose connection both mirror will stop working

Aug 24, 2011 | 1987 Jeep Cherokee

1 Answer

The drivers side mirror adjusts up and down but not side to side. Car has electric mirror adjust.

You will probably need that side mirror as the motor has failed. The motor in the mirror will control both directions, but sometimes loses the ability to control either up/down or in/out. Check the other side if it also doesn't adjust side to side I'd then suspect the mirror switch.

Jan 31, 2011 | Toyota Camry Cars & Trucks

1 Answer

Side mirror on passenger side does not move up when using the control

if you press the mirror itself you will hear a ratchet sound,centralise the mirror then try around the outside edges....

May 21, 2010 | 2003 Saab 9-3

1 Answer

We have a 2005 elantra. The driver side mirror will not adjust.

Elantra/Sonata mirror controls switch is most likely cause. Play with the switch by moving it back and forth between LH & RH a couple of dozen times, then try it again. If it starts to work, the problem is intermittent contact in the control switch. If not, you'll need to check for any problems in the wiring between the switch and the mirror connector pins. If you don't find any problem with the wiring or connections, the problem is in the mirror itself.

Sep 05, 2009 | 2005 Hyundai Sonata

Not finding what you are looking for?
2007 Chrysler Aspen 4x2 Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides