Question about 1999 Oldsmobile Intrigue

2 Answers

Can u show a diagram on how to bypass ac compressor on a 1999 Oldsmobile Intrigue

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Oldsmobile Master
  • 842 Answers

You can go to any auto parts store, and tell them you need a belt for your car without a/c. The shorter belt will drive everything but the a/c. This will by pass the a/c. God-Bless! Just tell them you want to bypass a/c.

Posted on Apr 03, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 739 Answers

If you mean Electrically bypass, simply disconnect the lead to the power clutch. If you mean by pass the serpentine belt? Good luck with that.

Posted on Apr 03, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: Needing to remove ac compressor to install ac bypass pulley

There are a couple of ways to approach this. I just did one of these for a friend. The A/C pump seized while running. The serpentine belt broke. Crazy things can happen to other components when this occurs. In this case the broken ends of the belt, I think, whipped back around on itself on the crankshaft pulley and one of the other pulleys in the belt circuit and devastation occurred. 1) It snapped the power steering pump bracket in two. 2) It took out the alternator. 3) And not to be left out, GOODBYE cool blowin air conditioning. Time to decide what to do. He had to order the power steering bracket from a dealer (junk yards were cleaned out). He decided to replace the power steering pump with a remanufactured unit and new hoses (parts houses are much cheaper than dealer parts folks). You'll need a pulley remover that you can usually borrow (with a deposit) from some parts houses. He HAD to buy the alternato ya gotta have juice. I have been using the name, "parts houses" . (Can we use specific company names in this forum MR./MS. Editors ? I Feel I need to for the sake of all of us that come here for correct information.) THE ANSWER : DO you want to drop the bucks into fixing your A/C ? NO ? It can be involved and costly depending on how good of a do it yourselfer you are. New pumps are spendy. Then, if you use the older refridgerant you'll need a conversion kit and blah blah blah. YOU have opted for a bypass pulley. COOL ! Errrr...not actually. It's coming out. The bolts that hold the A/C pump to its bracket come out from BEHIND the bottom of the unit. They are long and won't clear the intake manifold,at least not easily. Take the bracket bolts out from the front. Take the hose from the pump to the dryer apart (at the dryer). Do you want to preserve the system for future repair? If so, cover that connection on the dryer to protect it from the world. With a sharp blade, cut the other hose coming off the pump right behind the grill. Or, try to take the fitting apart at the evaporator. Cutting it is easier. Plug the cut off end if ya want. Future repair thing. Rotate the pump forward so you can either take the bolts out,or remove the pump and bracket as a unit, with the lengths of hose attatched to the pump. This gets all that hose you no longer need out of the engine compartment. NOW THE BYPASS PULLEY. He found a pulley from NAPA. IT DOES NOT WORK ! YOU DO NOT NEED IT ! Nothing against NAPA. I have bought good parts from them before. Maybe their supplier does not know. The pulley is supposed to drop into the A/C bracket in the concave recess that the pump once occupied. IT WASN'T EVEN CLOSE. Chevy released THREE versions: Poor Boy-no power steering,no A/C. MIDMan-power steering,no A/C. Rich Guy-power steering,with A/C. SO....... If you have power steering, the A/C pump removal just put you into Midman status. Stop at your local chevy dealer, ask them to print you a belt routing diagram from the computer parts book. It shows all three versions. Go to your local,,,,,,,"PARTS HOUSE", tell them info...year,make,engine size, REMEMBER.. IT NO LONGER HAS AIR CONDITIONING. YOU'LL GET A SHORTER BELT !! IF, they sold you the bypass pulley.....GET YOUR MONEY BACK !!! Use the diagram you got. The belt is routed a little different since you lost the A/C pump and the idler pulley with it's bracket(that you can keep for future repair or trade in for to be made into beer cans) Also remember that without a belt on, the tensioner pulley is swung over to the end of it,s range of motion. When you get the belt routed correctly you have to put a wrench on the bolt on the pulley and turn hard to compress the spring. (COUNTERCLOCKWISE) The bolt is left hand thread so it won't come loose while ya reef on it to get the belt swung onto the ALTERNATOR LAST.<<<<<<GOOD LUCK !!! ADDED NOTE: Would that bypass pulley work on say...an "88" or "89" or "90" ? > I DO NOT KNOW. DID CHEVY change the size of the pump bracket after 87 ? We will be letting the good folks at NAPA know what we ran into and how we fixed it. We also will ask for a refund on the wrong part for the job. IT DOES NOT FIT AN 87! WE DO KNOW THIS..... IF the belt had just broke in half and safely dropped away, then all those parts wouldn't have been needed and the cost of the fix is FOR A SHORTER BELT and a little sweat to remove the A/C pump and bracket. The A/C NEVER WORKED ANYWAY

Posted on Jun 23, 2008

co7196
  • 3433 Answers

SOURCE: I need a wiring diagram for the ac to find the high and low pressure valve and the compressor switch .

No you don't. The hi/lo awitch is on the tubing at the drier.

Posted on Jun 27, 2009

  • 1 Answer

SOURCE: LOCATION OF FUEL FILTER ON 1999 OLDSMOBILE INTRIGUE

my 98 oldsmobile intrigue keeps reving high them stalls what could be the problem

Posted on Sep 05, 2009

  • 1149 Answers

SOURCE: bypass ac compressor 2006 dodge ram 3500 5.9 L

Hi:
The easiest method to do this is to go to an auto parts store and buy a belt designed for a truck with no air conditioning. The belt will be the right size, and you just install it as normal, and bypass the compressor

Posted on Dec 15, 2009

Testimonial: "a"

  • 91 Answers

SOURCE: Changing water pump on a 1999 Oldsmobile Intrigue

Easy - drain coolant, remove pulley, remove drive belt, remove water pump bolts, reverse.
0c9a704.jpg
Check it out at http://99intrigue.shutterfly.com/waterpump

Posted on Apr 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 oldsmobile intrigue and I need to bypass my ac compressor with my serpentine belt, does anybody know what size belt I need?


Laurie, why bypass the compressor? - even if it is frozen, as long as the AC clutch is not activated there will not be an issue. To be safe just disconnect the wire powering the AC clutch.

Oct 09, 2016 | Oldsmobile Cars & Trucks

1 Answer

Can i bypass my ac compressor on my 2002 oldsmobile intrique


yes can unplug connector at compressor---pull fuse if u are trying to by-pass by belt u will have to check clearance of the other accessories and measure for a smaller belt

Dec 09, 2012 | 2002 Oldsmobile Intrigue

1 Answer

2000 olds intrigue.....bypass AC compressor with new size serpentine belt


Sure , it can be done if you know the exact length of the belt you need. I would think the biggest problem would be getting the belt on so everything turns in the right direction.

Dec 19, 2010 | 2000 Oldsmobile Intrigue

1 Answer

How do i put bypass pulley on ac unit


AFTER YOU HAVE AC SYSTEM DISCHARGED AT A GARAGE OR DEALERSHIP. WHEN YOU REMOVE THE AC COMPRESSOR THE BY PASS PULLEY WILL MOUNT IN THE SAME SPOT AS AC COMPRESSOR.THE BYPASS PULLEY KIT WILL HAVE INSTRUCTION ON HOW TO INSTALL IT.

Oct 18, 2010 | 1999 Oldsmobile Alero

1 Answer

Where can I find the crank position sensor on a 1999 Intrigue 3.5.engine H?


The crank sensor is located on the leftside of engine at the base of oil level indicator, heres a diagram to show you, the diagram show it with engine upside down,the sensor is near the bottom of the block right above the top of oil pan,remove a bolt and it slides out.a39ea9d.gif

Aug 24, 2010 | 1999 Oldsmobile Intrigue

1 Answer

My ac compressor is squealing. is there a cheap solution to this, can i put a smaller belt on and by pass the compressor?


It could be the belt, but also be the bearings squealing, it will lock the compressor down and snap that belt. But you can bypass the compressor with a smaller belt.

Jan 15, 2010 | 1999 Oldsmobile Intrigue

2 Answers

NEED 1999 olds intrigue serpentine belt diagram


1999 OLDSMOBILE INTRIGUE - V6 3.5L 214ci GAS FI N H
Belt Routing Diagram - Multiple Accesory
ba2f954.jpg


1999 OLDSMOBILE INTRIGUE - V6 3.8L 231ci GAS FI N K
Belt Routing Diagram - Multiple Accesory
9e23dfe.jpg


I hope helps with this (remember rated this help) Good luck.

Dec 23, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Need a diagram of how to put on serpintine belt for a 1999 oldsmobile intrigue 3.5 ltr


Below is the diagram you requested. Thank you for using Fixya and please remember to return to rate this answer.
Greg

99 Intrigue 3.5L Serpentine

3021d8b.jpg

Dec 17, 2009 | 1999 Oldsmobile Intrigue

1 Answer

NEED DIAGRAM TO INSTALL BELT


1999 OLDSMOBILE INTRIGUE - V6 3.5L 214ci GAS FI N H
Belt Routing Diagram (Multiple accesory)
6c67130.jpg

1999 OLDSMOBILE INTRIGUE - V6 3.8L 231ci GAS FI N K
Belt Routing Diagram (Multiple accesory)
c34dd7c.jpg



Hope helped (remember rated this help). Good luck.

Oct 16, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Intrigue AC?


if you have the filter missing you a/c evaporTOR MIGHT GET DURT AND decrease the air flow, but the cooling should be ok
is it blowing hot air? or the air flow is low?

Jun 17, 2008 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...