Question about 1999 GMC Yukon Denali

2 Answers

Replaced starter new battery fuel and air filters blown fuses won't start only click click

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • GMC Expert
  • 200 Answers

Check battery to starter cable connections and battery to ground connections if they appear good run a set of jumper cables from battery to starter and try if it works bad connection

Posted on Apr 02, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Double check your starter wires. They might be flip flopped.

Posted on Apr 02, 2015

  • Dave Peter Apr 02, 2015

    Double check your starter wires. They might be flip flopped.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced starter new battery fuel and air filters blown fuses wont start only click click


'Click Click' means not enough electricity is making it to the starter. This could be bad or dirty connections, a bad starter relay, a weak battery (even if new), bad electrical leads, a misaligned starter (jammed bendix or bad flywheel)...

Sometime DIY means do it again....and again...and again, until you get it right(ish)

Apr 02, 2015 | Cars & Trucks

1 Answer

Replaced starter brand new battery blown fuses fuel and air filters wont start only clicks


'Click Click' means not enough electricity is making it to the starter. This could be bad or dirty connections, a bad starter relay, a weak battery (even if new), bad electrical leads, a misaligned starter (jammed bendix or bad flywheel)...

Sometime DIY means do it again....and again...and again, until you get it right(ish)

Apr 02, 2015 | Cars & Trucks

1 Answer

Hooked up battery backwards now engine isn't


No. Replace the Engine control unit that was destroyed when you reversed the polarity to it.

Jul 22, 2013 | Cars & Trucks

1 Answer

My car won't start. The battery is good and the starter is doing it's job. The fuel filter has been replaced. The car will start with starter fluid and run when revved but won't start o


check fuel pump fuse and relay also the fuel injection fuse and ecu fuse, if they are ok remove the back seat and you will see a cover remove the cover and check for voltage at the pump plug and ground, you hear the pump work if not need new pump

Apr 07, 2012 | 1997 Toyota Corolla

1 Answer

Is there a starter fuse on a 86 buick park ave


May be a starter fuse - but if blown, starter will not rotate engine. More likely a fuel starvation problem. Replace fuel filter in gas line - first choice. Next, have fuel pump pressure checked. If it has failed, you will get 4 -5 seconds of engine run before stopping.

Jan 06, 2012 | 1989 Buick Park Avenue

1 Answer

Stop on stop sign engine died


If the engine won't fire up, but your starter turns over, you may want to check your timing unless you have a check engine light on. If the CEL light is on, have the codes scanned.

If the engine won't turn over with the starter or it clicks, have your battery tested at autozone or advanced auto parts. Replace the battery if it is bad. Else, have your starter tested.

If the engine still won't turn over and the battery and starter are tested fine, you may have a blown fuse, bad ignition switch, or a failed relay.

If the engine fires up but randomly dies and starts back up, you either have a failed sensor, failing fuel pump, clogged fuel filter, bad plugs or wires, or a failing ECU.

Sep 06, 2011 | 1996 Nissan Quest

1 Answer

Starting problem think it is fuel filter but not sure have blown filter out twice but problem keeps occuring would it be the pump? once it starts it runs well. Its a mitsubishi triton dual cab ute mk 2003...


Thanks for choosing FixYa and welcome to the site. Listen to hear if you can hear the fuel pump kicking on when you first turn the key. You should hear a humming sound for a second or two. If you do, it is working, If not, it is not working. If so, check your fuel pump fuse, relay, and shut off button if you have one. It could also be bad fuel injectors. You can pour fuel into the intake, if it starts, you have a fuel issue. If it doesn't, it shouldn't be fuel related then. If these all check out, if you don't have inside power, it is a connection problem with the battery or a bad battery. If you have power and there is a clicking sound, clean the battery terminals and post, check the connection. Make sure the battery is good. If you turn the key and there is nothing, you have a bad starter or starter solenoid. Check your ignition fuse also. If the starter is not getting the correct amount of power from the battery, it won't start. Make sure the alternator isn't draining the battery as well.

Aug 21, 2011 | Mitsubishi Pickup Cars & Trucks

5 Answers

Hummer ran out of gas and wont start


Purchase a new fuel filter and a can of starter fluid. Replace the fuel filter. Take the can of starter fluid and spray into the intake. You can remove the air filter and have someone spray into the plenum going to the intake at the same time as you start the engine. This should get it started. Make sure you have a fully charged battery. Charge it fully if necessary.

Jan 05, 2010 | 2004 Hummer H2

1 Answer

2004 A 8L won"t start


starter wont click because there's not enough "juice" to turn it over. this isnt because of the battery as you have just replaced it. it is due to a bad alternator recharging the battery as you drive. if it were only a fuse it would be the solenoid in the starter. but if it had started after you installed the battery then its not the solenoid. solution: buy a refurbished alternator and

Apr 24, 2009 | 2004 Audi A8

Not finding what you are looking for?
Cars & Trucks Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...