Question about 2004 Ford Expedition

3 Answers

2004 ford expedition door will not lock or unlock when hit but I do hear a clicking sound near the fuse box what's the problem?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

The relay is sticking, if you put your hand on it when you press the lock button you will feel a little shake in it, when you have found the correct one, pull it out and replace it.

Posted on Apr 02, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,422 Answers

By CLICK do you mean the normal sound you are used hearing and I'm asumeing you are talking about the keyless entery.
Do the other doors lock and unlock normaly.
If so then the problem is inside the door .The way it works is their is the motor that moves the mechinisum that has small metal rods that have clips and plastic anchors that will pivit somewhat .
However some times with the window partitaly down at highway speeds the window can move out of the track it runs in and hit these rods if rolled all of the way down witch could a clip to fall off the rod . Or one of the plastic peice could have broken
In short if the other door locks work their is no problem with the keyless system but a broken or disconnected part inside the door that isn't working.And needs to come apart to know for sure .

Posted on Apr 02, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 41,466 Answers

Bad relay no doubt

Posted on Apr 02, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Ford Taurus Window won't go up

It's not permanently fixed, but I held the button down and slamed the door, it went up. I probably need a new window motor in the door.

Posted on Jun 06, 2009

  • 77 Answers

SOURCE: rear doors on my 2003 Ford Expedition won't lock/unlock

check if it will work with the child locks engaged/disengaged if nothing the lock actuators may be worn out.

Posted on Aug 01, 2009

ghost45
  • 1280 Answers

SOURCE: 2004 Hyundai Sonata door lock functions inoperable.

you have a bad relay.. the 'lock' relay.

Posted on Sep 23, 2009

01fordeb
  • 1033 Answers

SOURCE: Door locks on Ford Expedition stuck

Look under your steering wheel right under the dash. There should be a small white strip with 5 numbers. This is your master code for your vehicle. If you bought the car used and they give you a code, they could have made their own code, but the master will override it. If this don't help, the module for the doors may be going bad.

Posted on Jan 05, 2010

ZJLimited
  • 17970 Answers

SOURCE: how to find a the fuse box in an ford expedition

Check this graphics locations and the Expedition Owners Manual (page 249 and next)...

4cdf667.jpg

and Power Distribution Box (underhood)...

8fd8c28.jpg

Hope helps (remember rated this).

Posted on Jun 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 ford expedition eddie bauer All the doors won't lock/unlock, just make a buzzing sound repeatedly. Also does this when shutting the vehicle off.


What makes a buzzing sound , the door lock actuators ? Or where do you hear the buzzing coming from if not at the doors ?
Power Lock
The power lock/unlock feature requests all of the vehicle doors, including the liftgate, be locked or unlocked upon a customer request from any interior door lock switch in the vehicle. The power door locking system functions independently of ignition status or vehicle speed. When the vehicle security module receives an unlock/lock command from any door lock control switch, the vehicle security module will activate relays internal to the module to supply the correct power and grounds for the door lock actuators.
Visual Inspection Chart Mechanical Electrical
  • Binding latches
  • Central junction box (CJB) fuse(s):
    • 5 (7.5A)
    • 30 (30A)
  • Circuitry
  • Relays
  • Remote transmitter
  • Keyless entry keypad
  • Vehicle security module

  1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  1. If the diagnostic tool does not power up, refer to the diagnostic tool manual.
    1. Carry out the diagnostic tool data link test. If the diagnostic tool responds with:
      • SCP, UBP or ISO; all elctrconic control unitw, no response/not equipped, refer to Section 418-00 .
      • No response, not equipped for vehicle security module, refer to Section 419-10 .
      • System passed, retrieve and record the continuous diagnostic trouble codes (DTCs), erase the continuous DTCs, and carry out the self-test diagnostics for the vehicle security module.
    1. If the DTCs retrieved are related to the concern, go to the Vehicle Security Module Diagnostic Trouble Code (DTC) Index to continue diagnostics.
    1. If DTCs are retrieved that are not found in the following Vehicle Security Module Diagnostic Trouble Code (DTC) Index, refer to the Master Vehicle Security Module Diagnostic Trouble Code (DTC) Index in Section 419-10 .
    1. If no DTCs related to the concern are retrieved, proceed to the Symptom Chart to continue diagnostics.

Jan 13, 2016 | Ford Cars & Trucks

1 Answer

2004 ford expedition fuse box diagram. looking for any fuses that have to do with starter?


In the central junction box, 30A FUSE 101 applies to the starter relay; 30A FUSE 102 applies to the ignition switch.

Mar 07, 2015 | 2004 Ford Expedition

1 Answer

What fuse is for the drivers door keypad an a 2003 expedition


In the fuse diagram for the 2003 Ford Expedition, a fuse is not indicated specifically for the "Door Keypad"; However it does show which fuse is needed for the Door Lock and Door Lock/Unlock Relay. Fuse location 30, Fuse amp rating 30a.

If you already have a manual, you will find this information in the table of contents under "Roadside Emergencies" fuses and relays.

If you do not have a user manual, you can download one at http://www.motorcraftservice.com

On the menu to your left, click on "Owner Guides".
In the drop down menus click on the year and the model.
Below those drop down menus is another drop down menu, click which Owner Guide you want. I clicked on "1st printing", as well as "2nd printing". The fuse info was the same on both.

Aug 02, 2011 | 2003 Ford Expedition

2 Answers

I have no power to several fuses on 01 ford expedition


Check in the high amp fuse box under the hood as one of those fuses may be blown causing no power to several accessories.

Mar 23, 2011 | 2001 Ford Expedition

2 Answers

Keyless entry not locking or unlocking doors just unlocking back door.


in the back of this vehicle drivers side above the wheel arch behind the panel is the auto alarm system and its all rivited into place and suspect a fault in this bosch unit which is very expensive to replace ,i assume that the switch on the drivers door still locks and unlocks all the doors and the one in the back of the vehicle as well

Feb 10, 2011 | 2004 Ford Expedition

2 Answers

1999 Ford Expedition I can't get the electric locks to work. I have checked the fuses and they are fine. I checked the switch cluster on the door and have good continuity on the switch for both lock and...


This is a very common problem with all the trucks. The fix is to replace the door actuators. You could do one at a time but alll will most likely be affected. I know its hard to understand how all the doors could go out about the same time if thats the case but its pretty common.

Nov 08, 2009 | 1999 Ford Expedition

1 Answer

My door locks do not work with keyless or not, auto lights do not work, and radio does not turn off when door opens. what can be the problem? has new battery.


Sounds like the SJB (Smart Junction Box) has failed. It is the "fuse box" inside, it also contains a programed module.

Oct 22, 2009 | 2004 Ford Expedition

1 Answer

Power locks don't lock or unlock hear noise under dash near glove box i was wondering if relay switch is no good.hear clicking noise in relay, when trying to unlock or lock doors


if the relay is clicking,its most likely working,sounds like signal from relay is not getting back to doors to unlock doors,I would check for damaged wiring at pivot point of door(hinge) area,all the wiring goes through a large rubber accordion looking tube,pull back one side of rubber and inspect wiring for damage

Oct 15, 2009 | Pontiac Bonneville Cars & Trucks

Not finding what you are looking for?
2004 Ford Expedition Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...