Question about 2004 Ford Explorer Eddie Bauer

1 Answer

My car stops suddenly and after few minutes it starts and works normally.At the beginning it was doing this around once a month,then every few days ,lately almost every day,now many times every day.

Note : the lamp ( check service soon ) is on since this problem started.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 451 Answers

Sounds like fuel pump is ready to fail. First do the easy stuff. Change out fuel filter. If that improves then you are good to go. Secondly I would do a fuel pressure test this test will tell you if the fuel pump is weak and or about to fail. Good luck

Posted on Apr 02, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dash board and or cluster going bad


Check your ground strap that goes from the engine to the firewall. It may be loose and moving, causing a disconnect.

Mar 02, 2014 | Nissan Sentra Cars & Trucks

1 Answer

I have a 3 month old corolla 2012 le automatic. The engine temperature stays below C when I start the car in the morning and heating doesn't work. Even letting the engine run on idle for a few min


You need to have the dealer look at this, if you fool around with it you can void your warranty. Toyota looks for any legal excuse to void the warranty.

Dec 06, 2012 | 2012 Toyota Corolla L Sedan 1.8L 4-cyl....

1 Answer

How do you change the clock on a 2009 Chevy cobalt.


Setting the Clock Without Date Display AM/FM Base Radio with a Single CD Player
To set the time:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press until the hour begins flashing on the display. Press a second time and the minute begins flashing on the display.
  3. While either the hour or the minute numbers are flashing, turn to increase or decrease the time.
  4. Press again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing stops after five seconds and the current time displayed is automatically set.
To change the time default setting from 12 hour to 24 hour, press the button until 12H or 24H is displayed. Once 12H or 24H is displayed, turn the knob to the desired option to select the setting. Press the button again to apply the setting, or let the screen time out.
With Date Display Radio with CD (MP3) and USB Port, and Radio with Single CD (MP3) Player
To set the time and date:
  1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press to turn the radio on.
  2. Press and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays.
  3. Press the softkey located below any one of the tabs that you want to change.
  4. To increase the time or date do one of the following: • Press the softkey located below the selected tab. • Press SEEK, or FWD. • Turn clockwise.
  5. To decrease the time or date do one of the following: • Press SEEK or REV. • Turn counterclockwise.
The date does not automatically display. To see the date press while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.
To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
  1. Press and then the softkey located below the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) displays.
  2. Press the softkey located below the desired option.
  3. Press again to apply the selected default, or let the screen time out.

Nov 21, 2010 | 2009 Chevrolet Cobalt

1 Answer

1994 Toyota Pick-up 4-cyl. overheating


I had the same problem and i replaced my fan clutch and it stayed cool at all times. that's is the problem.

Jun 30, 2009 | 1994 Toyota Pickup

1 Answer

My 2000 Subaru Legacy shudders when driving...


Temperature sensors check to make sure it is warmed up before allowing system to work properly. This keeps the motor from being worked too hard before is has reached temperature. Remember that aluminum has to be at proper temperature and expansion to make all parts work properly.Hope this helps and have a great day.

Jun 07, 2009 | 2000 Subaru Legacy

1 Answer

Car stopped working


I had a very similar problem with my 2005 accord a few months ago. Try jump starting the car with jumper cables. If the car starts and everything works normally, then the battery is probably your problem. This turned out to be my problem. Good luck.

Sep 21, 2008 | 2005 Honda Accord

1 Answer

1995 Chrysler Concorde


the alarm is activating when he locks it and for some reason the key or fob isnt deactivating it..check the disarm switches in the door

Aug 11, 2008 | 1995 Chrysler Concorde

Not finding what you are looking for?
2004 Ford Explorer Eddie Bauer Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...