Question about 2004 Kia Amanti
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Under driver and passenger seats are wires that go to seat belt anchors.These are tensioner wires.Unplug the wires from the plug under the seat.clean and replace.Doing this while the ignition is turned off.Then turn ignition back on.In 90% of the time this is your problem.Constant movement of seat causes this or rear passengers kicking plugs off.Good luck phil.
Posted on Jul 10, 2009
it could be caused by a belt slipping, low power steering fluid, or by a problem with the power steering pump itself. check the power steering fluid level, check the belts to see if they are snug and dont have excess play in them, if not sure on how to do it take it to a mechanic to have the belts checked and tightened to spec or replaced. and last of all if none of the above helps, have someone check the power steering pump out.
Posted on Jan 16, 2010
OK......if its flashing on and off, this is indicating a current fault.......so you will unfortunately have to take it to a mechanic/repair shop with a scan tool to verify that there is no further fault and to clear the codes.........vehicles before 1998 time had ways to erase/clear the codes, but now with manufacturers trying to ensure that they get return business after the car is sold, they have restricted these methods, and can only be done with a scan tool.........
Posted on Dec 02, 2010
Tips for a great answer:
Apr 14, 2012 | 2004 Kia Amanti
Aug 16, 2011 | 2005 Kia Amanti
When the airbag light (SRS) is on or blinks it means a fault has occurred in the system and the airbag diagnostic monitor has disabled the system, the most common problem that turns the light on is a break in the connection to the steering wheel mounted airbag, this is due to a rotating ribbon contact that breaks under the steering wheel that connects the airbag to the wiring harness and the diagnostic monitor, the part is called the clock spring contact, a coiled up ribbon electrical contact that turns with the steering wheel while maintaining a mechanical connection to the airbag mounted on the steering wheel, to replace this part you must disarm the airbag system and remove the steering wheel, this requires a special steering wheel puller tool and that you disarm the airbag system before you start the work, to do this disconnect the battery negative cable for 1/2 hour prior.
May 03, 2011 | 2004 Honda Accord
Oct 27, 2010 | 2004 Infiniti QX56
Apr 25, 2010 | 2005 Kia Sorento
Mar 30, 2010 | Kia Sorento LX Cars & Trucks
Nov 25, 2009 | 2000 Kia Sportage
Nov 21, 2009 | 2005 Kia Amanti
Mar 16, 2009 | 2004 Kia Amanti
68 people viewed this question
Usually answered in minutes!