Question about Lincoln Navigator

2 Answers

I have a 2007 lincoln navigator. The drivers seat wont recline back to normal position. everything works. It goes front and back but it won't recline. does anyone know what the problem might be?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 2,039 Answers

Check the track of the seat sometime coin and other debrie fall in there

Posted on Apr 02, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Lincoln Expert
  • 495 Answers

Several motors/cables/drives under the seat...see if you can determine which one isn't working while actuating the switch

Posted on Apr 02, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: front seat stays in the reclined postion..

The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.

Posted on Jul 28, 2008

  • 19 Answers

SOURCE: camry power driver seat motor won't return from recline position

it has three septet motors with gears
if one is bad you will replace it

Posted on Feb 24, 2009

  • 4336 Answers

SOURCE: 2003 lincoln town car forward and backward driver seat won't work

The only way to solve this issue is to extract the seat and inspect. The front and back movement is different from the other actions that the seat may be able to do...

Look for damaged, dirty and miss aligned track components.

Posted on Sep 07, 2009

Testimonial: "It was helpful but my problem in taking the seat out is that it is stuck in the very extreme back position and i cannot get to the back nuts to remove"

  • 104 Answers

SOURCE: Front drivers seat won't recline and its stuck

electric or manual?

Posted on May 17, 2011

  • 1 Answer

SOURCE: My front seat will not move forward. It will

You can move the drivers seat back by turning on the power, getting in the seat and position your feet firmly on the fron flor with your back firmly against he seatback, and then engage the switch pushing back - while pushing like hell with your feet. You can actually hear the seat drive shaft turning while the seat moves back. The principle should be the same for moving forward, but pressure would have to be aplide to the back of the seat.

Posted on Nov 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 honda accord drivers power seat stuck in the down position.


Could be defective adjustment switches rather than motor

Oct 10, 2016 | 2004 Honda Accord

1 Answer

Power (driver) seat won't recline; everything else works


I would first disconnect and recommended checking if something is tangled in the track and make sure plugs in good

Nov 22, 2013 | 1998 Toyota Avalon

1 Answer

HONDA ACCORD Seats Front Assembly Recliner went down and won't go up


I wouldn't ruin anything by trying things yourself

I would have a dealer check it out

The dealer I used in the past, has a seat specialist come
in on Wed only, around 5:30 after the service bays close
& one service writer hangs out until that person fixes a
couple vehicles seat issues

Jun 12, 2012 | 1995 Honda Accord

3 Answers

Front seats recliners won't "click" in the upright position.


personally i would pull the seats and weld them into a position that is comfortable both sides of the seat should be welded. a small mig welder would take care of this issue nicely and permanently ! .. jay Florida

Nov 10, 2011 | 1986 Chevrolet Camaro

1 Answer

2003 lincoln town car forward and backward driver seat won't work


The only way to solve this issue is to extract the seat and inspect. The front and back movement is different from the other actions that the seat may be able to do...

Look for damaged, dirty and miss aligned track components.

Sep 07, 2009 | 2003 Lincoln Town Car

1 Answer

How do i remove the front seats of a 1998 Pontiac Grand Prix?


On W-Body vehicles, the front seats are secured to the floorpan by two front hook attachments and two rear bolts installed to nuts welded to the floorpan.
The manually operated two-way front adjusters provides only fore and aft movement of the seat. When the seat adjuster handle located on the front seat is pulled up, the seat adjusters unlock, permitting travel of the seat. When the seat is in the desired position and the seat adjuster handle is released, the seat locks in place.
A power operated six-way seat adjuster is available. The adjusters are activated by three 12 volt, reversible, permanent magnet motors with a built-in circuit breaker. The motors are energized by a switch bolted on the seat side panel.
The three motors drive the front seat and rear vertical actuators and a horizontal actuator. When the adjusters reach the limit of travel, torque is absorbed through the rubber mounted grommets located between the motor and the support. An overload relay is provided in the circuit and will open should excessive stall be applied.
The optional 60/40 split bench front seats have seat back head restraints on the driver's and passenger's seat back. The head restraints are designed so they cannot be removed from the seat back without first inserting a small rounded tool inside the head restraint support tube to release the locking tab. The 60/40 split bench seat is equipped with a reclining mechanism on both the driver's and passenger's side. The recliner lever is located on the outboard side of the spring cushion. When the lever is pulled upward, the spring loaded dual linear reclining unit located in the cushion frame is released, allowing the seat back to be pushed rearward or allowing the spring loaded reclining unit to bring the seat back forward.
Bucket seats are equipped with manual reclining mechanisms. An optional six-way power seat adjuster is available. Some bucket seats are equipped with inertia seat back locks. This system allows the seat back to fold forward without requiring the occupant to release a locking lever or access to the rear seat area. During a sudden stop or deceleration, or if the front of the vehicle is nose down, the inertia system of the seat back lock will engage, holding the seat back in its rest position. A release lever is provided to allow manual release of the seat back lock when the vehicle is in the nose down position. The release lever is located at the lower rear outboard corner of the seat back.
Some W-Body vehicles (notably Pontiac coupes) have passenger front seats equipped with an E-Z Entry device. This is actuated, in an unoccupied seat, by completely folding the seat back forward disengaging the adjuster, and sliding the front seat forward to gain access to the rear seat area. To return the seat to its normal position, return the seat back to its rest position, and slide the entire seat rearward, engaging the adjuster.
W-Body rear seats are available in several styles including a rear seat with an integral child restraint device.

Sep 01, 2009 | 1998 Pontiac Grand Prix

1 Answer

Lincoln mark viii seat lock


on the bottom side of the seat back is a seam it is held together by locking plastic strips that you can pry apart with a screw driver or trim tool. from there you can roll up seat cover. velcro strip hold parts of it to the foam. the seat bottom has plastic strips that snap to the underside of the seat frame. you can remove them the same way. as for the recliner issue you wont knnow till you get in there. Im not sure about the spring but something could have fallen in there preventing it from locking into place

Jun 22, 2009 | 1993 Lincoln Mark VIII

2 Answers

My front seat will not move forward. It will recline, move up and down but it will not move forward. I've tried reseting the seat positions but nothing seems to work. my seat wont move forward is there a...


You can move the drivers seat back by turning on the power, getting in the seat and position your feet firmly on the fron flor with your back firmly against he seatback, and then engage the switch pushing back - while pushing like hell with your feet. You can actually hear the seat drive shaft turning while the seat moves back. The principle should be the same for moving forward, but pressure would have to be aplide to the back of the seat.

Jun 02, 2009 | 2004 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...