Question about Cadillac CTS

Open Question

Service ac message reset - CTS Cadillac Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low-refrig ac off message is on


Does the AC system show normal pressure readings and maintains at least 28-32 PSI on the low side charging port?

Mar 21, 2014 | 1999 Cadillac DeVille

Tip

Reset service message in Volvo V50, S40, C30, C70 and other


Reset Volvo service reminder indicator or maintenance messages after changing oil, filters and inspecting brakes and suspension.

  1. Press and hold trip reset button,
  2. turn on the ignition,
  3. wait for the yellow warning light to start blinking,
  4. release the button and wait for confirmations sound,
  5. turn off the ignition,
  6. turn the ignition back on to check if the service message is gone.
This procedure will reset messages:
  • TIME FOR REGULAR SERVICE
  • ENTRETEIN REGULIER NESECC
  • SISTEMA MOTORE PROSS.TAGLIANDO
  • STANDARDWARTUNG DURCH FUHREN
  • TAGLIANDO SCADENZA
  • TIJD VOOR REG SERVICE
  • WYMAGANY PRZEGLAD OKRES.
  • ZEIT FUR REGELM. WARTUNG
This also works in any other modern Volvo car, like: C30, C70, S40, S60, S80, V40, V50, V60, V70, XC60, XC70, XC90.
More details over here: Volvo reset service reminder indicator

on Feb 13, 2015 | Volvo V50 Cars & Trucks

Tip

Ford-Lincoln service light 1988-01


LS

2000-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the STATUS control to access the System Check mode. Press the RESET button to display OIL LIFE _% RESET FOR NEW. Press and hold the RESET button until OIL LIFE IS 100% is displayed.


Mark VIII


1993-97

When "CHANGE OIL SOON" or "OIL CHANGE REQUIRED" is displayed on the Message Center, turn the ignition on. Press and hold "OIL CHANGE RESET' or the "RESET" button until "OIL LIFE RESET TO 100%" is displayed on the Message Center.


Continental


1989-94

When "SERVICE" is illuminated, on the Message Center, press the "SYSTEM CHECK" button on the right of the display. Then press the "RESET" button. The "SERVICE" symbol and mileage will start to flash. Next, press the "SYSTEM CHECK" and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.


Continental


1988

When "SERVICE DUE" is illuminated on the Message Center, press the "CHECK OUT" button located below the display. Then press the "RESET" button. The display should now read "SERVICE DONE?" Next, press the "CHECK OUT" button and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.







on Dec 07, 2009 | Ford Lincoln Continental Cars & Trucks

1 Answer

How do i reset messages on my v70 03 volvo


The only one you can reset is the "time for regular service" message.

To reset this, turn ignition off, hold the trip reset button down and turn key to position II. Keep holding the trip reset until you hear a ping noise and the orange triangle flashes. Immediately release the trip reset and turn the ignition off.
When you start the car next, the message will be gone.

Other messages like "SRS Service required" or "Alarm system service required" can only be rest with a OBD code reader.

Mar 16, 2013 | 2003 Volvo V70

1 Answer

Lincoln LS 02 AC filter reset


You have 4 buttons right under your center air vents, the one on the right says STATUS, CLICK IT. Now look on your right hand corner of you dash, it should change options every 3 seconds, when it comes to where it says AC Filter....go back and click the RESET button once. Then look back and it should say to RESET hold that button in this time for about 5 seconds, and it will go back to saying AC Filter 100%....Done!

Dec 11, 2012 | 2002 Lincoln LS

Tip

Ford service light procedure 1994-01


Windstar

1999-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the message center, press the SETUP control to access the System Check mode. Press and release the RESET button until IF NEW OIL HOLD RESET is displayed. Press and hold RESET button until OIL LIFE SET TO 100% is displayed.


Windstar


1997-98

To reset "CHANGE OIL SOON/OIL CHANGE REQUIRED" message on the Message Center, press "RESET" and "SETUP" controls at the same time. "OIL LIFE % HOLD RESET NEW" will be displayed. Press the "SETUP" control to access the System Check mode. Press "RESET" to start the system check. Press and hold the "RESET" control. Press "RESET" and "SETUP" to reset the system to 100%


Explorer,
Mercury
Mountaineer


1997-01

To reset the oil life feature on the Message Center, press and hold the "OIL CHANGE RESET" button until the system counts down (about 5 seconds). The Message Center will display "OIL LIFE RESET TO 100%"


Probe

with Analog Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE INTERVAL CHECK" is displayed is displayed on the far left side of the instrument panel, press the "SERV OFF" button, located on the speed alarm keyboard, until three tones sound.


Thunderbird,
Mercury Cougar

with System Scanner

1986-88

When "SERVICE" appears on the Diagnostic System Scanner, press the "ODO SEL" and "TRIP RESET" buttons simultaneously. The "SERVICE" message will go out and three short beeps will be heard when the system is reset.


Thunderbird,
Mercury Cougar


1989-94

If "CHANGE OIL SOON" or "NOW" is indicated on the Monitor, turn the ignition on, but do not start the engine. Within 16 seconds, insert a paper clip into the cavity to the left of the display and depress. The display will flash; when it stops, the system is reset.















on Dec 07, 2009 | Ford Windstar Cars & Trucks

1 Answer

How do you reset service message on ac xc70, 2006 volvo


Your owners manual should give you directions for resetting the message.

Dec 14, 2010 | 2006 Volvo XC70

2 Answers

Want to reset service interval? i've just finish


Ok,
Then turn on ignition. Press O button (top on the left) for 30 seconds. Release after you hear a beep and press M (lower left)
Scroll through the messages untill you reach the Reset Std message.
If you have used oil according to quality sheet 229.31 or 228/229.51, you can scroll to Reset.31 or Reset.51 respectively.
This selects the oil type used.
Now, when appropriate oil type is selected- press 0 for 6 seconds untill ''2'' is displayed. Press O once again briefly and the ''done'' message will confirm that the job is finished.
This work on 08 model some times you need to do it more than once for it to work

Oct 26, 2010 | 2010 Mercedes-Benz Sprinter

2 Answers

How do I reset the oil service counter


1. Switch ignition OFF.
2. Press and hold button "A" - fig. 1 or fig. 2.
3. Turn ignition key to position "I".
4. After 5 seconds the words "OIL SERVICE" or "INSPECTION" are shown together with the message "reset" or "re".
5. Release button "A". Press and hold button "A". After a futher 5 seconds the message "reset" starts to flash.
6. Release button "A". Press and release button "A" again.
7. The new service interval is now displayed.
8. Press and release button "A". The message "END SIA" is now displayed.
8. Switch ignition OFF.

Fig.1
49f6ad9.png

Fig.2
770baf6.png

Aug 27, 2010 | 2004 BMW 3 Series

2 Answers

Ac Light stays on how to get turned off


Now you see why we get paid the big bucks!
Just kidding,LOL
Here is the sequence:

1. Press the STATUS control to
access the System Check function,
the message center will display A/C
FILTER XXX% RESET FOR NEW.
2. Press and hold the RESET
control to set to 100%, the message
center will display IF NEW FILTER
HOLD RESET.
3. After a successful reset, the
message center will display A/C
FILTER LIFE SET TO 100%.

Mar 03, 2009 | 2004 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...