Question about Cars & Trucks

1 Answer

Wont start no spark to coils coils are getting power and ground all fuses good.pls help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,963 Answers

How do you know you have no spark? Have you looked at the distributor, or do you have a coil pack for each spark plug? Is the distributor securely in place and fastened down properly? Are you sure you have fuel being delivered properly? Does the exhaust smell like fuel is getting through the system? There are so many possibilities for error that it's difficult to diagnose at long distance. If you have multipul coils for each plug. It's probable that sensors are bad for the ignition system. It is also possible that the ECU is bad. What was done to the car before? When did it not start after the work had been done?

Posted on Apr 01, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My van wont start no fuel or spark ?


Sounds like it could be the ignition module in the distributor. You have a throttle body instead of a carb. The injectors get a ground signal from the engine computer when they are supposed to open. The ignition module takes a signal from the pickup coil in the bottom of the distributor and decides when to fire the plugs and also the injectors.
If the injectors and the coil has power, it could be the module or the pickup coil.

Oct 31, 2014 | Cars & Trucks

1 Answer

I have a 2002 dodge intrepid cranks but no spark.changed cam shaft sensor and crank sensor., all new plugs but still no spark....please help ..thanks


Hi Leroy, Im glad to help!

Here's a couple things you can try. First, swap the ASD Relay with one of the same type relays in the relay box. If it still doesn't start check every fuse. If it still doesn't start check power and ground at the "COIL PACK" If power and ground are good Replace the Coils Pack. If there is no power and ground at the coil pack then make certain you are getting power from the ignition switch to the ASD Relay. Hope this helps and have an awesome day Leroy.

Oct 02, 2014 | 2002 Dodge Intrepid

1 Answer

While driving audi a4 died an not starting


- Won't start
- Check for spark (no spark on any cylinder)
- Check for rpm signal to ECU with scan tool or vag-com (checks good)
- Check for power and ground at coil packs (no power on red/green wire)
- Check fuse 29 (fuse checks good, but is not energized during cranking)
- Check ECM power relay (is getting power and ground to coil side, and power to source pin. It clicks, but no output to load pin)
- Jump relay (vehicle runs)
- Replace relay.

Jun 26, 2014 | 2004 Pontiac Grand Am

1 Answer

Spark plug blew out now car wont start


sounds like the autoshutoff relay may be bad..it controls the ingition and the fuel pump too..if the pump works check for spark by inserting a screwdriver into a pulled off spark plug wire and look for a decent spark between the screwdriver shaft and any ground like the block..if no spark the relay may not be powering up the ignition system..

Dec 15, 2013 | Acura RSX Cars & Trucks

2 Answers

It turns but it wont start,it has gas and power


Pull off the coil ignition cable at the distributor and check for spark coming out of coil when cranking engine over. Use a heavy rag or glove to hold the wire 1/4 inch from a metal ground. Should see a strong blue spark when cranking to verify ignition is good. If no spark, check for battery voltage to coil on the coil primary. If you have current to the coil, suspect a bad coil, ignition module, crank position sensor, or cam position sensor, or pcm. The coil, ignition module, and sensors can be tested before replacing.

Jan 29, 2013 | Cars & Trucks

1 Answer

I have a 2002 Toyota Camry with a 2.4L. It wont starts it tries but wont. I have checked gas and spark. It is getting the gas but issue with spark. Im getting spark to two plugs the outer two but not the...


start by checking to see if you have power and ground at the coil connection look for chewed wire rodents are known to chew on toyota wire harness due to what they are made of

May 02, 2010 | 2002 Toyota Camry

4 Answers

2001 Ford Focus stopped running while i was driving and wont start. Makes a churning sound but no power is going to engine. I changed the ignition coil, still wont turn on. Any suggestions?


Can you explain more so I can help. What do you mean still wont turn on, engines doesn't start or starter motor doesn't turn. Have u taken out a spark plug and connected it to the cable put the end of the spark plug to a ground and make someone turn on the engine for a few seconds you should see some blue sparks. Carefully use gloves. If no sparks, spark plug is bad next thing to check instead of putting the spark plug in the cable put Philips screwdirver put the screwdriver near a ground not touching about one inch make someone turn the engine for a couple of second you should see the spark jumping from the screwdriver to the ground, If there are no sparks ignition coil or spark plug cables are not good. But u say u changed ignition coil so maybe your cables are not good. There is a connector near the ignition coil disconnect it and turn ignition switch on measure the voltage you should have in between 12vdc + or - .5 vdc if no voltage present there is a blown fuse, Check for it

Jul 23, 2009 | 2001 Ford Focus

2 Answers

No start, no spark, no signal to the coil


there is a fuse that works the battery try checking if it is still good

Mar 03, 2009 | 1996 Chevrolet Blazer

1 Answer

Car wont start


test light on neg with key on power at both sides of coil ???? next test light on bat plus put to coil neg and have somone turn car over if test light flashes and still no spark coil is bad if test light no flash ignighter is most likely bad the ignighter switches ground on your coil for spark

Dec 23, 2008 | 1994 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...