Question about 2006 Ford Crown Victoria

2 Answers

I have a 2006 crown Vic and it's not tring to start change the alternator have a new battery

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 11,011 Answers

Is the red light in the center of the dash , on top of dash panel not instrument cluster flashing when trying to crank the engine over ? If yes you have a anti theft system problem ! If the light is not flashing you can check for power an ground an PCM control at the starter relay in the under hood battery junction box ! Bottom of relay or side show pin numbers ! Pin's 30 & 86 should have battery voltage ! Pin 87 - ground through the starter , Pin 85 should have nothing unless cranking engine over . The PCM supply's a ground here energizing the starter relay ! You can also test this by using a test light . The clamp end to battery positive , the point end touch to pin 85 relay socket while cranking ! Test light should light !

Posted on Apr 01, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Ford Master
  • 531 Answers

So now you have to check the starter system and wiring

you already looked over the fuses, right?

Posted on Apr 01, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1214 Answers

SOURCE: 1992 Crown Vic wont crank

Check the starter solenoid. Usually mounted on a fender well. Find by following the + battery cable.

Posted on Feb 14, 2009

  • 33 Answers

SOURCE: Replace horn on 2006 crown vic

I believe once you have mounted the horn and connected the wire you will find that the horn wire was cut at (by) the steering coloum that the siren override was hooked to,you will have reconnect this,I hope this helps you

Posted on Jul 04, 2009

johnjohn2
  • 5763 Answers

SOURCE: what is the wrench symbol

This is to remind you of the oil change, and also they have it programed to come on every 7500 miles for service, this is so they can sell you something but basicly for oil changes, to reset the light and when you have an oil change you should ask them to reset it even if its not on, depending on how often you do an oil change you may just need to reset every second oil change, for example an oil change should be done every 3,000 mile this way the light comes on and you can wait until the oil is due the second time, hope this helps. to reset turn key on all the way but dont start engine make sure all doors are closed then push and hold the trip button until you hear 3 beeps system is now reset.

Posted on Dec 08, 2010

SOURCE: where is fuelpump on 2003 crown vic police intercepter

can you replace a fuel pump from a 2000 Crown Victoria with out removing the gas tank

Posted on Nov 14, 2011

emissionwiz
  • 74945 Answers

SOURCE: fuse panel diagram 2006 crown vic

The diagram is part of the owners manual, you can access a free pdf copy HERE.

Posted on Jun 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interiorfuse box diagram for2002 crown vic


Changing the Battery & Alternator won't cause those issues

When people come to a site like this and say they HAD something
done & NOW have problems

You know who put them there--THE SHOP YOU WENT TO

Mar 29, 2014 | Cars & Trucks

1 Answer

2004 crown vic battery died. Now I can't open the


the key doesn't work in the door locks?

If that's the case than your only alternative is to call you local towing company or locksmith and have then perform a lockout service.

Feb 25, 2012 | 2004 Ford Crown Victoria

1 Answer

1991 crown vic, new battery, alternator, power going to alternator, still won't charge battery... plz help!!!!!!


check the ground cable. the ground straps to the engine and body alos. Make sure the cables are clean and have no corrosion anyplace.

Mar 17, 2011 | 1991 Ford LTD Crown Victoria

1 Answer

1994 crown vic, not PI, is not charging. Put in


there is a alternator fuse on the relay center under the hood that is a large fuse rated i think at like 140 amps check it it probably blew

Feb 07, 2010 | 1994 Ford Crown Victoria

1 Answer

Car won't start


buy a cheap volt meter check voltage on both sides of the starter seleniod on the fenderwell if you have 12 volts on both sides while cranking test voltage at starter if you have 12 volts at starter with fully charged battery and it doesnt start you will need a starter it also sounds like you might need an alternator once you can get it started

Dec 09, 2009 | 1984 Ford Crown Victoria

1 Answer

Cant start my crown vic 1998


ignition switch or starter relay or a wiring problem

Oct 03, 2009 | 1998 Ford Crown Victoria

1 Answer

New battery and it still won't crank at times.


you would need an ohm meter or a test light to figure out what is drawing voltage. you probably have short some where or, just perhaps the ignition switch is bad.

Mar 26, 2009 | 1987 Ford Crown Victoria

3 Answers

1992 Crown Vic wont crank


Check the starter solenoid. Usually mounted on a fender well. Find by following the + battery cable.

Feb 14, 2009 | 1992 Ford Crown Victoria

Not finding what you are looking for?
2006 Ford Crown Victoria Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...