Question about 2002 Oldsmobile Bravada
All the suggested answers should help you pinpoint the problem
fuses are easiest to check, followed by actually looking under the seats to check the connections/ plugs & wiring
Posted on Apr 01, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
as long as nothing is stuck in track and you hear no noise when using switches, look for broken wire at connector or in harness. ck fuse first of course, if blown, something may be stuck in track causing it to stop and blowing fuse
Posted on Nov 16, 2008
There should be a connector under each seat which connects power to the heating element. It is likely either clipped to the seat or tucked under the carpeting. You'll almost definitely need to remove the seat to get easier access to it, though it should be possible to find/access it without removing it, just more difficult. Once you find it, disconnect it. You can use any multimeter with a continuity tester to test the circuit. First, check the DC voltage coming from the wires that come up from the floorboard. If you are getting voltage there, you will want to check continuity of the element itself by probing the two wires with the meter set to it's continuity testing selection. If there are more than two wires you will need to determine which is the common wire and which are the "live" wires. With the power disconnected you can test the element to figure this out easily. For example if your heated seat has three wires, test all three for continuity in pairs. If one wire always shows continuity no matter which other wires on the same plug you touch that should be common.
If the element tests good (in other words you find that all the circuits show continuity) and you are getting power from the plug that comes from the vehicle itself, you might need to check the resistance of the element. It is rare to have a bad element that still shows continuity, but it is possible that the resistance may have for some reason become lowered and the element therefore does not heat up.
Try these and let me know how it goes!
Posted on Jan 30, 2009
No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.
Posted on Dec 07, 2009
Testimonial: "Thanks for your assistance. Great information"
Power seat quit working on driver side.
ITs the power seat motor itself. unplug the harness conected below the seat switch and check if it reciving and current when the switch in on if it does then reconnect it and chech the current on the other wires when u move the switch if it doed then bro u need a new motor .There are four bolts located below the seat.open them and check for a new motor...
Posted on May 21, 2010
I found this post area while looking for a way to fix my stuck 2001 Camry LE drivers seat. Sure enough, while engaging the seat motor (it could be heard making an initial clikc), I hit the front rails a coupel time prettysolidly with a rubber mallet. That fixed it!
Thanks to all for providing a quick fand easy way to get the seat moving again!
Posted on Aug 22, 2010
Tips for a great answer:
Jul 28, 2015 | Oldsmobile Cars & Trucks
Feb 10, 2012 | 1996 Oldsmobile Aurora
Dec 18, 2010 | 2002 Oldsmobile Bravada
Nov 08, 2010 | 2002 Oldsmobile Bravada
Nov 25, 2009 | Oldsmobile Silhouette Cars & Trucks
Dec 13, 2008 | 2002 Jeep Grand Cherokee
174 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: