Question about Fiat Panda

Open Question

How to get the back cover off the fiat panda wing mirror

I need to get the back cover off my wing mirror to use on new replacement mirror not sure if it is supposed to pop off or do I need to unscrew something

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chain saw
  • 94 Answers

SOURCE: replacing the wing mirror on an audi A4

TO FIT A NEW MIRROR FIRST CONNECT THE WIRING PLUGS THEN ENSURE THE FRICTION PIN ON THE BACK OF MIRROR ENGAGES IN THE SLOT (OUTER EDGE OF MIRROR) PRESS FIRMLY AT THE CENTRE OF THE MIRROR TO ENGAGE THE RETAINING CLIP....IF YOU NEED TO REMOVE MIRROR INSERT A FLAT TOOL BEHIND THE LOWER EDGE AND LEVER IT FROM THE CLIPS.. HOPE I WAS OF SOME HELP TO YOU...

Posted on Feb 23, 2009

  • 29 Answers

SOURCE: Wing mirror replacement Fiesta

on the inside of car remove plastic triangle then you will find 3 screws remove these and refit

Posted on Mar 19, 2009

  • 1 Answer

SOURCE: 2008 Ford Fusion Wing Mirror Replacement

I checked Ford Focus mirror replacement and it seems to be the same. This is for the manual, unheated mirror.

Remove the mirror cover inside the door - slide a screwdriver behind the cover and pry loose carefully.

Remove the single 10mm bolt and the mirror comes free.
NB. Do not drop the bolt into the door.

Posted on May 22, 2009

  • 1986 Answers

SOURCE: how to remove and repalce vw golf wing mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can remove the bolts securing the mirror to the door.

Posted on Sep 18, 2009

  • 1986 Answers

SOURCE: fitting a wing mirror on the passenger side of a fiat punto

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wheel change on a Fiat panda


Great car i saw it on top gear lol. To change a tire, you will need a car jack, lug wrench, and a spare tire. Just put the lug wrench on the bolts and spin away. Make sure that you undo the bolts in a "x" pattern.

Jul 29, 2016 | 2006 Fiat Panda 1.2

1 Answer

How to replace wing mirror


Replacing Wing Mirrors - YouTube

? 4:06
https://www.youtube.com/watch?v=2LAqSfV-swI
May 23, 2010 - Uploaded by Decibel Car
Want to replace your wing mirrors with aftermarket ones ? Had someone in a shopping mall car park break ...
    Remove the screws that hold the mirror and remove it from the door. Attach the new mirror. Reconnect the electrical connector and make sure you test the new mirror before putting the parts back into place. Reverse the entire procedure to reassemble the door trim panel.

    Replace a Broken Side View Mirror ' The Family Handyman

    www.familyhandyman.com/automotive/replace-a-broken...mirror/view-all

Dec 02, 2015 | Cars & Trucks

1 Answer

Replacing electric wing-mirror


remove the interior trim cover and three torq headed screws ,simple job

Feb 12, 2013 | 2007 Fiat Grande Punto

1 Answer

Fiat multipla cant find fuse box brokenwing mirror motor running constantly


If the wing mirror is broken you will need to replace it some time. The fuse that operates the wing mirror probably operated several other circuits as well. My suggestion is to cut one of the wires to the mirror motor and insulate it. This will stop the motor from running without affecting other circuits.

Feb 04, 2011 | Fiat Strada Cars & Trucks

1 Answer

How to repace drivers side wing mirror on fiat stilo


easy pull the plastic trim off the inside back of the mirror ,inside the car?' then three screws hold it on ,simple a 5 min job at most

Dec 23, 2010 | Fiat 124 Cars & Trucks

2 Answers

Fitting fiat doblo wing mirror


wing mirror or door mirror is held on by three screws on the inside of the door behind the triangular piece of trim which just pulls off

Nov 29, 2010 | 2011 Fiat 500

1 Answer

Trouble removing the engine cover from Fiat panda 2006 diesel


i guess you got a chip then, look at the cover ithink 3 or 4, circles, fine screw driver and pop em out to see the 10mm nuts.

Aug 15, 2009 | 2006 Fiat 124

2 Answers

How do i take out the broken glass in wing mirror


it's just clipped on. order the new glass and it will be obvious where the clips are on the back. the glass and backing are one unit, this is clipped onto the mirror housing in the middle.

Jun 30, 2009 | 2003 Toyota Corolla

2 Answers

Fitting a wing mirror on the passenger side of a fiat punto


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Apr 18, 2009 | 2006 Fiat 124

1 Answer

How to replace a wing mirror on 95 Civic VTi Hatchback


There is a black plastic cover on the other side of the mirror, take it off make sure you have the wires long enough to splice back to you will be able to see all the bolts that need to come off to replace the mirror. You will be able to figure out the rest it is very simple

Jun 24, 2008 | 1995 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...